2003 Mazda Protege Belts and Cooling Parts
Choose your Part Name for your 2003 Mazda Protege
Accessory Drive Belt
Automatic Transmission Oil Cooler Kit
Engine Coolant Bypass Hose
Engine Coolant Hose
Engine Coolant Outlet Gasket
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Temperature Sender
Engine Coolant Temperature Sender O-Ring
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor O-Ring
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing Cap
Engine Coolant Thermostat Housing Gasket
Engine Cooling Fan Assembly
Engine Cooling Fan Motor
Engine Oil Cooler Kit
Engine Oil Cooler Seal
Engine Water Pump
Engine Water Pump Gasket
Engine Water Pump Housing Gasket
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Drain Plug
Serpentine Belt
Image
Product
Price
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12551497, 12559337, 12T24E, 13869, 15869, 1601-24240, 1760060822, 1760060823, 1760083810, 1760083831, 1760083841, 19300PB2811, 19300PB2812, 19300PB2813, 19300PB2815, 19300PB2816, 19300PB2817, 19300PM3003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | 4 Cyl 1.6L | - |
- Radiator cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Cap Depth: 0.97
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | Automatic | 4 Cyl 1.6L | - |
- Serpentine Belt Driven
- Product Attributes:
- Water Pump Drive Type: Serpentine Belt
- Fan Clutch Included: No
- Mounting Hardware Included: No
- Thermostat And Housing Included: No
- Hub Hole Quantity: 3
- Impeller Vane Quantity: 6
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: No
- Mounting Hole Quantity: 9
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | 4 Cyl 1.6L | - |
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Cooler inlet size: 1/2 Barb
- Adapter o-ring size: 2-3/4
- Cooler height: 7-5/8
- Cooler mounting: 13-7/8
- Cooler inlet dim: 6-1/4
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum Tube & Fin
- Adapter thickness: 1-3/4
-
Features:
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Perfect for stock to mild street use, this universal 6 pass high capacity copper tube/aluminum fin engine oil cooler kit can not only reduce oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1998 | 4 Cyl 2.0L | 122 |
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- 16 5/8" x 5 1/8" x 3/4"
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- 7000 Series 4 Pass 11/32" Hose Barb Kit
- Product Attributes:
- Inlet dim: 3-3/4
- GVW: 14000
- Width: 16-5/8
- Height: 5-1/8
- Mounting: 13-3/4
- Depth: 3/4
-
Features:
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for today's highly-stressed compact cars and SUVs', they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Mazda Protege | L | 2000 | Automatic | United States | 4 Cyl 2.0L | - |
- Radiator cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Valve OD: 1.30 In
- Cap Depth: 0.85
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | Manual | 4 Cyl 1.6L | - |
- Fail-Safe Thermostat-192 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 192F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-18240, 7240-192, 74092, 97240192, NI, P7240-192, SS192-0427
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | 4 Cyl 1.6L | - |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F Alternate Temp
- Fail-Safe
- Product Attributes:
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-18241, 7240-180, 74080, 97240180, NI, P7240-180, SS180-0427
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | 4 Cyl 1.6L | - |
- Thermostat-180 Degrees
- Temperature 180F Alternate Temp
- Standard
- Product Attributes:
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
022315171D, 101, 12T24D, 13868, 15868, 1601-24241, 17600-60814, 1760060811, 1760060812, 1760060813, 1760083811, 1760083821, 1760085830, 1760085831, 1767083000, 19300611005, 19300657003, 19300657812...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | 4 Cyl 1.6L | - |
- w/o A.C.
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 35.70
- 906.78
- Rib Depth: Deep
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 35.04
- 890.02
- Rib Quantity: 4
- Minimum Operating Temperature:
- -42.7
- -45
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
0K21A-18-381, 11 28 1 739 470, 11 28 1 743 193, 11720-59S01, 14091838, 146-040890, 146-040895, 146987-0300, 25-040350, 25-70888, 25212-23700, 25212-23721, 350K4, 4040350, 4668130, 4K350, 4PK1345, 4PK885...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Mazda Protege | L | 1589 | Power Steering | 4 Cyl 1.6L | - |
Showing 1 - 10 of 109 products
Loading...