2004 Audi TT Quattro Belts and Cooling Parts
Choose your Part Name for your 2004 Audi TT Quattro
Accessory Drive Belt
Accessory Drive Belt Tensioner Assembly
Accessory Drive Belt Tensioner Pulley
Engine Auxiliary Water Pump
Engine Coolant Hose
Engine Coolant Hose C-Clip Retainer
Engine Coolant Hose Flange Plug
Engine Coolant Outlet Gasket
Engine Coolant Outlet O-Ring
Engine Coolant Pipe
Engine Coolant Pipe Adapter
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Temperature Sender
Engine Coolant Temperature Sender O-Ring
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor Clip
Engine Coolant Temperature Sensor O-Ring
Engine Coolant Thermostat
Engine Coolant Thermostat Housing
Engine Coolant Thermostat Housing Assembly
Engine Coolant Thermostat Housing Bolt
Engine Coolant Thermostat Housing Cap
Engine Coolant Thermostat Housing Gasket
Engine Coolant Thermostat Housing O-Ring
Engine Coolant Thermostat Seal
Engine Coolant Water Outlet
Engine Cooling Fan Assembly
Engine Cooling Fan Controller
Engine Cooling Fan Motor
Engine Cooling Fan Motor Bracket
Engine Cooling Fan Switch
Engine Oil Cooler
Engine Oil Cooler Gasket
Engine Oil Cooler Kit
Engine Oil Cooler O-Ring
Engine Oil Cooler Seal
Engine Water Pump
Engine Water Pump Outlet Pipe
Engine Water Pump Outlet Pipe O-Ring
Engine Water Pump Pulley
Engine Water Pump Seal
Hose Clamp
Radiator
Radiator Coolant Hose
Radiator Coolant Hose Adapter
Radiator Coolant Hose C-Clip
Radiator Coolant Hose Clip
Radiator Coolant Hose Connector
Radiator Mount
Serpentine Belt
Image
Product
Price
- W/Plastic Impeller; Interference engine application; Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Installation Warnings: Coolant Flush Required. Fill W/ New Volkswagen Coolant Or Oe Equivalent Only.
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
06A121011F, 06A121011G, 06A121011H, 06A121011HX, 06A121011L, 06A121011LX, 06A121011T, 06A121011TX, 06A121012, 06A121012D, 06A121012E, 06A121012G, 06A121012X, 06A121018B, 06A121031C, 1-9270, 131-2227, 133024...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | Main | GAS | 4 Cyl 1.8L | - |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 70
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 26
- Material: Thermoplastic
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
04854089A, 06A903315D, 06A903315E, 06A903315F, 11281439062, 11287503427, 11287515866, 11287515867, 166200V010, 1662036030, 19189978, 1F2015980, 1L5Q 6A228 AB, 1L5Z 6B209 A, 1L5Z 6B209 AA, 231033, 231144, 23770AA05A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | GAS | 4 Cyl 1.8L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Audi TT Quattro | V | 3189 | Lower - Tee-1 To Tee-2 | GAS | 6 Cyl 3.2L | 195 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Audi TT Quattro | V | 3189 | Upper - Radiator To Tee | GAS | 6 Cyl 3.2L | 195 |
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Adapter o-ring size: 2-3/4
- Cooler height: 7-5/8
- Cooler mounting: 13-7/8
- Cooler inlet dim: 6-1/4
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum Tube & Fin
- Adapter thickness: 1-3/4
-
Features:
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Perfect for stock to mild street use, this universal 6 pass high capacity copper tube/aluminum fin engine oil cooler kit can not only reduce oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | 4 Cyl 1.8L | - |
- without Thermal Switch
This Part Fits the Following OEM/Substitute Numbers:
1J0121087C, 85682, 902-914, 9CH2914, CH2914, CO34876, NI
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | 4 Cyl 1.8L | - |
- Includes Seal Replaces Connector to Radiator; Upper
This Part Fits the Following OEM/Substitute Numbers:
3B0122291C, 86060, 902-714, 9CH8714, CH8714, NI
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Audi TT Quattro | V | 3189 | Upper | 6 Cyl 3.2L | 195 |
- Coupling Replacement Located on Radiator ; Includes outlet flange and clip
This Part Fits the Following OEM/Substitute Numbers:
6Q0122291F, 85925, 902-919, 9CH9919, CH9919, CO34824
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | 4 Cyl 1.8L | - |
- 190 Degrees F OE Specified Temperature ; "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating."
- Fail-Safe
This Part Fits the Following OEM/Substitute Numbers:
7475-190, 74751, 97475190, NI, P7475-190, SS195-5747
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | 4 Cyl 1.8L | - |
- Product Attributes:
- :
- 24.9
- 70
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: Y
- Material: Polymer
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
04593633AA, 04593805AB, 04861514AA, 11 28 0 946 004, 11 28 1 407 520, 11 28 1 439 062, 11 28 1 745 551, 11 28 7 515 867, 11.28.1.482.199-02, 16620-22010, 16620-22013, 16620-22030, 16620-22031, 16620-22033, 231144, 23770-AA059, 23770-AA05A, 36131...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Audi TT Quattro | L | 1781 | 4 Cyl 1.8L | - |
Showing 1 - 10 of 124 products
Loading...