2007 Honda Element Belts and Cooling Parts
Choose your Part Name for your 2007 Honda Element
Accessory Drive Belt
Accessory Drive Belt Tensioner Assembly
Accessory Drive Belt Tensioner Pulley
Engine Coolant Bypass Hose
Engine Coolant Bypass Pipe O-Ring
Engine Coolant Hose Connector Gasket
Engine Coolant Pipe Adapter
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose Connector
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor Seal
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing
Engine Coolant Thermostat Housing Assembly
Engine Coolant Thermostat Housing Gasket
Engine Coolant Thermostat Kit
Engine Coolant Water Inlet Gasket
Engine Coolant Water Outlet
Engine Cooling Fan
Engine Cooling Fan Controller
Engine Cooling Fan Motor
Engine Cooling Fan Shroud Bolt
Engine Cooling Fan Switch
Engine Water Pump
Engine Water Pump Gasket
Engine Water Pump Housing O-Ring
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Coolant Hose Connector
Radiator Drain Plug
Radiator Drain Plug Gasket
Radiator Hose Clamp
Radiator Insulator
Radiator Support Splash Shield Clip
Image
Product
Price
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda Element |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda Element |
- 14in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 22/16.2 Amp Draw High/Low; 14-1/2 in. Width; 14-1/2 in. Height; 2-5/8 in. Depth; 8-3/4 in. x 13-1/4 in. Mounting; Single
- 14in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 14.000 In.
-
Features:
- Mounts As Pusher Or Puller w/out Flipping Blade
- State-Of-The-Art Symmetrical Design
- High Output 300 Watt Motor
- 2100 CFM On High Speed/1500 CFM On Low Speed
- A very popular primary cooling fan, this 14 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2100 CFM while drawing up to 22 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda Element |
- Water Outlet Gasket
- FEL-PRO 72926 Water Outlet Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
90307PLC004, 91307PNA003, 91307RTA005
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- OE Comparison Rating: Oe Exact
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter:
- .67
- 17
- Outside Diameter:
- 3.01
- 76.5
- Width:
- 1.48
- 37.5
- Mounting Hole Quantity: 5
- Belt Type: V-ribbed
- Contents: Tensioner Assy.
This Part Fits the Following OEM/Substitute Numbers:
305321, 31170PNA003, 31170PNA013, 31170RAAA01, 31170RAAA02, 38278, 419-005, 419005, 45712, 49341, 89321, 89321FN, 999661, 999661A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | GAS | 4 Cyl 2.4L | 144 |
- Radiator cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Valve OD: 1.30 In
- Cap Depth: 0.85
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
- Engine Coolant Thermostat Housing
- Thermostat Housing, O-ring
- Product Attributes:
- Bolts Included: No
- Mounting Hole Quantity: 3
- Outlet Diameter: 1.25 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested Meets or exceeds all OEM standards.
This Part Fits the Following OEM/Substitute Numbers:
19320R40A01, 19320RAAA01, 85996, 902-5190, 9CH5996, CH5996, CO34852, NI
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | Lower | 4 Cyl 2.4L | 144 |
- Engine Coolant Thermostat Housing
- Thermostat Housing, O-ring
- Product Attributes:
- Bolts Included: No
- Mounting Hole Quantity: 3
- Outlet Diameter: 1.25 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested Meets or exceeds all OEM standards.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | Lower | 4 Cyl 2.4L | 144 |
- Product Attributes:
- : 76
- Max Belt Width: 08 Rib
- Bearing Inner Diameter 1: 17
- Flat: Y
This Part Fits the Following OEM/Substitute Numbers:
231016, 2W93-19A216-BA, 31170-R40-A02, 31170-RAA-A02, 31180-RAA-A03, 38023, 38028, 3C2E-6B209-CA, 419-612, 49017, 49052, C2C22758, C2C5093, F4DE-6C348-AA, F4DZ-6C348-A, F4SE-6B209-EA, F4SE-6B209-FA, F8TE-6B209-BE...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda Element |
- Integrated Housing Thermostat-170 Degrees
- Temperature 170F Includes housing, thermostat, and seal OEM Recommended Temp
- Integrated Housing Thermostat
- Product Attributes:
- Installation Tool Included: No
- Temperature: 170
- Mounting Hardware Included: No
- Bolt Hole Quantity: 3
- Bolts Included: No
- Gasket/Seal Material: Rubber
- Jiggle Pin Included: No
- Opening Temperature: 170
- Outlet Diameter: 1.30 In
- Start to Open Temperature: 170
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-316625, 19301RAAA02, 446172, 48767, 554-170, 55470, 86017, 902-5142, 9554170, P55470, QRT21, TI23878
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
Showing 1 - 10 of 78 products
Loading...