2010 Chevrolet Corvette Belts and Cooling Parts
Choose your Part Name for your 2010 Chevrolet Corvette
Accessory Drive Belt
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Tensioner Pulley
Engine Coolant Bypass Hose
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir Cap
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Seal
Engine Cooling Fan
Engine Cooling Fan Controller
Engine Oil Cooler Gasket
Engine Oil Cooler Line Gasket
Engine Water Pump Gasket
Radiator
Radiator Cap
Radiator Coolant Hose Kit
Radiator Drain Plug
Radiator Insulator
Serpentine Belt
Image
Product
Price
- Product Attributes:
- :
- 17.75
- 63.3
- Max Belt Width: 04 Rib
- Bearing Inner Diameter 1: 17
- Flat: Y
- :
This Part Fits the Following OEM/Substitute Numbers:
12557334, 12557335, 12585551, 12595289, 231135, 36220, 49159, CV6E-19A216-CA, CV6Z-8678-A, DS7E-19A216-AA, DS7Z-8678-A, YS-358, YS352
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | Air Conditioning | 8 Cyl 6.2L | Naturally Aspirated | 376 |
- Water Pump Gasket
- FEL-PRO 35635 Water Pump Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12307-1, 12559271, 12630223, K31628
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- Thermostat-187 Degrees
- Temperature 187F Includes seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.2
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.58 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 2.12 In
- Temperature (Degree): 187
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T033E, 131-160, 15158, 1601-317694, 34198, 34198S, 455808, 46158, 48290, 523-190, 52387, 89018168, 9523190, P52387, QRT49
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- Oil Cooler Gasket
- Oval port
- FEL-PRO 72435 Oil Cooler Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
B31867
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Chevrolet Corvette |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Chevrolet Corvette |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Chevrolet Corvette |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Chevrolet Corvette |
- Chevrolet Corvette Performance Aluminum Radiator, 2005-2013
- Performance Aluminum Radiator, fits Chevrolet Corvette 2005-2013
- Product Attributes:
- SellingPoint04: Drops Outlet Temperature By 5f Across Powerband
- SellingPoint05: Features A Two-row 2-in Thick Brazed Aluminum Core, Providing Ideal Fluid Temperatures On The Street And At The Track
- SellingPoint06: 56-percent Increase In Fin Surface Area For Optimal Cooling Properties
- SellingPoint07: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint01: Direct Fit For The 2005-2013 C6 Chevrolet Corvette
- SellingPoint02: Full Aluminum Construction With Durable, Tig-welded End Tanks
- TechSpec Overall Length (in): N/a
- SellingPoint03: Integrated End-tank Oil And Automatic Transmission Coolers
- TechSpec Chassis Codes: C6
- SellingPoint08: Patent Numberd905,759
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): 2
- SellingPoint10: N/a
- TechSpec Note: N/a
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ls2--ls3--ls7
- TechSpec Overall Width (ins): N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): N/a
- TechSpec Material: Aluminum
- TechSpec Applications: 2005-2013 Chevrolet Corvette--2006-2009 Chevrolet Corvette Z51--2006-2013 Chevrolet Corvette Z06--2010-2013 Chevrolet Corvette Grand Sport
- TechSpec Includes: Aluminum Radiator--mishimoto Lifetime Warranty
- TechSpec Rows: 2
- TechSpec DPI: N/a
- TechSpec Fluid Capacity (gal): N/a
- TechSpec Inlet (in): N/a
- TechSpec Outlet (in): N/a
-
Features:
- Direct fit for the 2005-2013 C6 Chevrolet Corvette
- Full aluminum construction with durable, TIG-welded end tanks
- Drops outlet temperature by 5 F across powerband
- 56-percent increase in fin surface area for optimal cooling properties
- Mishimoto Lifetime Warranty
- Keep your C6 on the track longer with the Mishimoto 2005-2013 Chevrolet Corvette Performance Aluminum Radiator. It's no secret that Chevy throttled the C6 Corvette?s cooling system with the limited airflow, and undersized radiator equipped from the factory. There's no way to bring your track day to a screeching halt like an overheated LS engine. Mishimoto is here to help by way of swapping out ill-equipped stock plastic radiator with our all aluminum performance radiator. We started by ditching the plastic in the end-tanks for TIG-welded aluminum, both increasing the size, and improving the longevity. Our improvements didn?t? stop at the end tanks either. Our engineer redesigned the core with two rows of coolant passages and bumped the thickness to two inches. This new design equates to a 56-percent increase in fin surface area, 45-percent increase in volume contributing to improved cooling properties.The Mishimoto 2005-2013 Chevrolet Corvette Performance Aluminum Radiator also features engine oil and automatic transmission coolers integrated into the end tanks, ensuring that It's a direct fit for your C6 no matter the cooling package equipped. The Mishimoto C6 Performance Radiator also includes the Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2010 - Chevrolet Corvette | Z06 |
- Product Attributes:
- :
- 28.3
- 70
- Groove Quantity: 6
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Flat: N
- :
This Part Fits the Following OEM/Substitute Numbers:
10239930, 12555423, 12555424, 12556612, 12559325, 12569301, 12580772, 12580774, 17530-54L10, 231015, 2N1Q-19A216-BD, 2N1Z-8678-BA, 2N1Z-8678-BD, 36326, 38008, 3M4E-6C348-CB, 3M4Z-6C348-CA, 419-604...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2010 - Chevrolet Corvette | V | 6162 | Main Drive | 8 Cyl 6.2L | Naturally Aspirated | 376 |
Showing 1 - 10 of 65 products
Loading...