2018 Chevrolet Tahoe Belts and Cooling Parts
Choose your Part Name for your 2018 Chevrolet Tahoe
Accessory Drive Belt
Accessory Drive Belt Tensioner Assembly
Automatic Transmission Oil Cooler
Automatic Transmission Oil Cooler Hose Assembly
Automatic Transmission Oil Cooler Kit
Engine Coolant Overflow Hose
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose
Engine Coolant Temperature Sensor
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing Assembly
Engine Coolant Thermostat Kit
Engine Coolant Water Outlet Seal
Engine Oil and Automatic Transmission Oil Cooler
Engine Water Pump Gasket
Engine Water Pump Housing Gasket
Radiator
Radiator Coolant Hose
Radiator Shutter Assembly
Radiator Support Baffle Bolt
Radiator Support Baffle Clip
Serpentine Belt
Image
Product
Price
- Product Attributes:
- Cross Section: K-section
- Top Width: .82
- Rib Profile: Straight Rib
- Outside Circumference:
- 1832.87
- 72.16
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 1816.10
- 71.50
- Rib Quantity: 6
- Minimum Operating Temperature:
- -42.7
- -45
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
11720-00Q2B, 12626076, 25-060714, 25-060716, 25-060716HD, 25-76071, 3676724C1, 4060715, 53007595, 6K714, 6K716, 6PK1815, 715K6, 8200 821 800, 88GB450P712, 88GB450P716, 88GB453P712, 88GB453P716...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Chevrolet Tahoe | V | 6162 | Main Drive | 8 Cyl 6.2L | 376 |
- Engine Coolant Reservoir Cap
- Relief pressure 15 lb Location-Reservoir
- Standard
- Product Attributes:
- Valve Outside Diameter: 1.20 In
- Attachment Type: Threaded
- Maximum Pressure: 18
- Cap Depth: 1.50 In
- Vented: Vented
- Filler Neck Outside Diameter: 1.98 In
- Cap Finish: Matte Black Plastic
- Coolant Recovery System: Open & Closed System
- Filler Neck Inside Diameter: 1.20 In
- Shell Diameter: 2.53 In
- Filler Neck Height: 0.50 In
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10248, 10248ST, 10575118, 11248, 12R27, 13502354, 15042975, 15066786, 15075118, 1678-290343, 17046, 20898801, 22652695, 22671020, 31532, 703-1711, 7046, 902-5601...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Tahoe | V | 5328 | 8 Cyl 5.3L | 325 |
- 16 Pass Electra-Cool Remote Fluid Cooler, -6AN
- For use with vehicle that require 3/8" ID hose or smaller
- 16 Pass Electra-Cool Remote Fluid Cooler, -6AN
- Remote Automatic Transmission Oil Cooler Kit
- Product Attributes:
- Airflow: Puller (reversible)
- Inlet dim: 8-3/4
- Width: 15-3/4
- CFM: 650
- Height: 11-1/2
- Mounting: 14-3/4 X 5-1/4
- Depth: 5
-
Features:
- 16 Pass Electra-Cool Remote Fluid Cooler, -6AN
- With its own air supply available when needed, the Electra-Cool is one of our most popular remote coolers and can literally be mounted anywhere space permits, making it a popular addition for performance compacts, hot rods, muscle cars and trucks. An efficient 16-pass tube and fin cooler coupled with a powerful 10" diameter Tornado fan and aluminum brackets, and featuring -6AN male fittings, each unit also includes 2 each -6AN x 3/8" barb fittings. Designed for transmission, power steering and fuel cooling.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Chevrolet Tahoe | V | 6162 | Automatic | 8 Cyl 6.2L | 376 |
- GM Drive Type Rivet
- Side Air Baffle Package Quantity: 2 Packaging Type: Clamshell
- Product Attributes:
- Package Contents: 2 Rivets
- Contenidos del paquete: 2 Remaches
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
11589289
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Chevrolet Tahoe | Left |
- GM Drive Type Rivet
- Side Air Baffle Package Quantity: 2 Packaging Type: Clamshell
- Product Attributes:
- Package Contents: 2 Rivets
- Contenidos del paquete: 2 Remaches
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Chevrolet Tahoe | Right |
- Body Bolt - M6-1.0 X 25mm
- Support Package Quantity: 4
- Product Attributes:
- Bolt Grade: 9.8
- SAE or Metric:
- M??trico
- Metric
- Tama├▒o nominal: M6 X 1.0 X 25
- Package Contents: 4 Body Bolts
- Thread Length: 20
- Head Tool Size: 10 Mm
- Thread Type:
- Coarse
- Grueso
- Contenidos del paquete: 4 Pernos De Carrocer?¡a
- Heat Hardened:
- Oui
- S?¡
- Yes
- Callout Size: M6 X 1.0 X 25
- Head Drive Type:
- Hex
- Hexagonal
-
Features:
- Durable materials - manufactured to specific thread tolerance standards
- Corrosion tested - hardware undergoes salt spray testing to ensure corrosion resistance
- Multipurpose usefulness - can be used in a variety of applications, from auto to home
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.
This Part Fits the Following OEM/Substitute Numbers:
11503982, 11609989, 455930
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Chevrolet Tahoe | Upper |
- Chevrolet Silverado 1500 V8 Performance Aluminum Radiator, 2014-2018
- Performance Aluminum Radiator, fits Chevrolet Silverado 1500 V8 2014-2018
- Product Attributes:
- SellingPoint04: 47-percent Increase In Fin Surface Area Over The Stock Radiator
- SellingPoint05: Core Features Extruded Tubes With Internal Struts For Increased Strength And Pressure Tolerance
- SellingPoint06: All-aluminum Design With Durable, Tig-welded Construction
- SellingPoint07: Includes Mishimoto M12 X 1.5 Magnetic Drain Plug To Capture Metallic Debris And Fragments In Cooling System
- SellingPoint01: Direct Fit For The 2014-2018 Chevrolet Silverado 1500 V8
- SellingPoint02: 45-percent Increase In Core Volume Over The Stock Radiator
- TechSpec Overall Length (in): 43.1
- SellingPoint03: 78-percent Increase In Tube Surface Area Over The Stock Radiator
- TechSpec Chassis Codes: K2
- SellingPoint08: Patent Numberd912,702
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 17.57
- TechSpec Core Thickness (in): 1.8
- SellingPoint10: N/a
- TechSpec Note: Patent #
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- TechSpec Overall Width (ins): 5.7
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 34.25
- TechSpec Overall Height (in): 20
- TechSpec Material: Aluminum
- TechSpec Applications: Cadillac Escalade V8 (6.2) 2015-2018--chevrolet Silverado 1500 V8 (5.3) 2014-2018--chevrolet Silverado 1500 V8 (6.2) 2014-2018--chevrolet Suburban V8 (5.3) 2015-2020--chevrolet Suburban V8 (6.0) 2016-2019--chevrolet Suburban V8 (6.2) 2019-2020--chevrolet
- TechSpec Includes: Mishimoto Aluminum Radiator--(2) Pre-installed Oil Cooler Adapters--(2) Pre-installed Transmission Cooler Adapters--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 3
- TechSpec DPI: N/a
- TechSpec Fluid Capacity (gal): 1.15
- TechSpec Inlet (in): N/a
- TechSpec Outlet (in): N/a
-
Features:
- Direct-fit for all 2014-2018 Chevrolet Silverado 1500 V8
- 45-percent Increase in core volume over the stock radiator
- 92-percent Increase in tube surface area and 74-percent Increase in surface area over the stock radiator
- Top 8 and bottom 8 rows utilize extruded tubes with internal struts for increased strength and pres
- Mishimoto Lifetime Warranty
- The Mishimoto 2014-2018 Chevrolet Silverado 1500 V8 performance aluminum radiator is the ideal upgrade for the stock Silverado radiator. This direct-fit radiator is designed and specifically engineered to maximize the cooling efficiency of your 2014-2018 Silverado whether It's your daily driver, work truck, or dedicated off-road vehicle. Thanks to a 2-inch thick core, the Mishimoto 2014-2018 Silverado 1500 V8 radiator boasts a 45.45-percent increase in coolant capacity over the stock radiator. Tube and fin surface area is also increased by 92.8-percent and 74.5-percent respectively over stock to make the most use of the air flowing through your Silverado's grille. The all-aluminum construction, along with strutted tubes in the top and bottom 8 rows, make this radiator tough enough to handle anything you can throw at it. The built-in oil and transmission coolers with installed stock-style fittings make installation a breeze. As with all Mishimoto products, this radiator is backed by Mishimoto's Lifetime Warranty. So, whether you're towing your weekend toys, ferrying the kids to school, or bombing dunes, you can rest easy knowing that your 2014-2018 Silverado 1500's engine is cooled by Mishimoto.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Chevrolet Tahoe | SSV |
- Chevrolet Silverado 1500 V8 Transmission Cooler, 2014-2018
- Transmission Cooler, fits Chevrolet Silverado 1500 V8 2014-2018
- Product Attributes:
- SellingPoint04: Durable Aluminum Adapter Lines And Cnc-machined Brackets Make Installation Easy
- SellingPoint05: Includes Ambient Air Temp Sensor Relocation Bracket For 2014 Models
- SellingPoint06: Included Thermal Bypass Valve Delete Allows Fluid Flow To The Cooler At All Times For Vehicles In Hot Climates
- TechSpec Overall Length (in): N/a
- SellingPoint07: Patent Numberd905,116
- SellingPoint01: Fits All 2014-2018 Chevrolet Silverado And Gmc Sierra 1500 V8
- SellingPoint02: Stacked-plate Construction For Maximum Durability And Superior Cooling
- SellingPoint03: Adds An Extra 0.65 Quarts Of Transmission Fluid And Over 3,000 Square-inches Of Cooling Surface Area
- TechSpec Chassis Codes: N/a
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 6
- TechSpec Core Thickness (in): 1.25
- SellingPoint10: N/a
- TechSpec Note: Minor Drilling Is Required To Install The Adapter Lines For This Cooler. Please See The Included Drilling Template And Installation Instructions For A Detailed Guide.----2014 Model Year Vehicles Require Relocation Of The Ambient Air Temperature Sensor. Pl
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 27
- TechSpec Overall Height (in): N/a
- TechSpec Fluid Capacity (qts): 0.65
- TechSpec Caution: N/a
- TechSpec Applications: 2015+ Cadillac Escalade 6.2l V8--2015+ Cadillac Escalade 6.2l V8--2014-2018 Chevrolet Silverado 1500 5.3l V8--2014-2018 Chevrolet Silverado 1500 6.2l V8--2015+ Chevrolet Suburban 5.3l V8--2015+ Chevrolet Tahoe 5.3l V8--2014-2018 Gmc Sierra 1500 5.3l V8--2
- TechSpec Includes: Mishimoto Stacked-plate Transmission Cooler--high-pressure Transmission Cooler Lines--high-strength Aluminum Transmission Cooler Adapter Lines--pre-installed Cnc-machined Aluminum Mounting Brackets--cnc-machined Aluminum Mounting Brackets--removable Therm
- TechSpec Rows: 14
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): N/a
-
Features:
- Mishimoto Lifetime Warranty
- Fits all 2014-2018 Chevrolet Silverado and GMC Sierra 1500 V8
- Stacked-plate construction for maximum durability and superior cooling
- Adds an extra 0.65 quarts of transmission fluid and over 3,000 square-inches of cooling surface area
- Included thermal bypass valve delete allows fluid flow to the cooler at all times for vehicles in hot climates
- making this cooler ideal for drivers in hot climates. Like all Mishimoto products, our 2014-2018 Chevy Silverado/GMC Sierra 1500 V8 transmission cooler is backed up by our Lifetime Warranty with Accident Protection for worry-free cooling as long as you own it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Chevrolet Tahoe | V | 5328 | 8 Cyl 5.3L | LT | 325 |
- Transmission Oil Cooler Pressure And Return Line With Bypass Valve
- Product Attributes:
- Temperatura máxima de funcionamiento (°F): 329 Grados F
- Package Contents: 2 Transmission Lines
- Contains Spring:
- No
- Non
- Length: 11.
- Maximum Operating Temperature (┬░F): 329 Deg. F.
- Tipo de extremo 1: Espiga De La Manguera
- End 1 Type: Hose Barb
- Hose Material:
- Acero
- Steel
- Temperatura mínima de funcionamiento (°F): -40 Grados F
- Minimum Operating Temperature (┬░F): -40 Deg. F.
- End 2 Inside Diameter: 0.295
- Flexible:
- Oui
- S?¡
- Yes
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- End 2 Type:
- Espiga De La Manguera
- Hose Barb
- Housing Color:
- Black
- Negro
- Plateado
- Silver
- Fittings Included:
- No
- Non
- Hose Color:
- Black
- Negro
- Noir
- End 1 Inside Diameter: 0.29
- Contenidos del paquete: 2 L?¡neas De Transmisi??n
- Maximum Working Pressure: 250
- Hose Shape:
- Recto
- Straight
-
Features:
- Direct replacement - this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
- Ideal solution - engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
- Durable construction - made of quality materials for reliable performance and long service life
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.
This Part Fits the Following OEM/Substitute Numbers:
23115735, 23141324, 23228719, 23234833, 23292385, 23370657
Additional Fitment Information:
| Vehicle | Position | Transmission Manuf. Code |
|---|---|---|
| 2018 - Chevrolet Tahoe | Inlet and Outlet | 6L80 |
- Active Grille Shutter
- Product Attributes:
- Hardwired Or Plug-In: Hardwired
- Voltage: 12
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Radiator Shutter Assembly
- Length: 41
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Width: 16.5
- Terminal Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Terminal Type:
- Aspa
- Blade
- Motor Included:
- Oui
- S?¡
- Yes
- Contenidos del paquete: 1 Ensamble De Rejillas Del Radiador
- Terminal Gender:
- Female
- Hembra
-
Features:
- Ideal replacement - this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
- Plug & play installation - this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone extensive testing to ensure a quality fit and reliable performance
- This radiator shutter assembly matches the fit and function of the original equipment shutter to restore function to the vehicle's active grille shutter system. This assembly features a factory-style connector for a plug-and-play installation.
This Part Fits the Following OEM/Substitute Numbers:
84046019, 84378163, 85043806
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Tahoe |
Showing 1 - 10 of 36 products
Loading...