2019 Ford Expedition Belts and Cooling Parts
Choose your Part Name for your 2019 Ford Expedition
Accessory Drive Belt
Accessory Drive Belt Idler Pulley
Engine Coolant Crossover Pipe
Engine Coolant Outlet Gasket
Engine Coolant Overflow Hose
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Cooling Fan Assembly
Engine Oil Cooler
Engine Water Pump Bolt
Engine Water Pump Gasket
Engine Water Pump O-Ring
Engine Water Pump Pulley
Intercooler
Radiator Cap
Radiator Drain Plug
Radiator Insulator
Serpentine Belt
Image
Product
Price
- 3mm Zip Tie Required for Installation
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 36.5
- 927
- Instruction Manual Included: Sheet K
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 35.91
- 912
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (stretch Fit)
- Cord Material: Nylon
- Material: Epdm
- Installation Tools Requirements: 3 Mm Zip Tie
- Top Width:
-
Features:
- Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
- Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
- Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
- NOTE: Stretch Fit belts are single-use only and must be replaced if removed
- Gates Micro-V Stretch Fit Belts, with exclusive self-tensioning technology, fit like a glove and perform properly on unique stretch fit drive systems. Gates continues to add coverage to this growing market segment.
This Part Fits the Following OEM/Substitute Numbers:
25-040359SF, 4040371S, 4K359SF, 4PK932EE, 4PKE912, BR3E 6C301 RA, BR3E 8A615 CA, BR3E 8A615 CB, BR3E 8A615 CC, BR3Z 8620 F, BR3Z 8620 Q, BR3Z 8620 S, BR3Z8620S, JK4 377 B, JK4364A, S040359
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | Air Conditioning | GAS | 6 Cyl 3.5L | 213 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1283
- 50.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1268
- 49.92
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
25-060499, 252122B140, 6K499, 6PK1265, 6PK1267, 6PK1268, 6PK1270, HL3E 8620 AA, HL3Z 8620 A, JK6505
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | GAS | 6 Cyl 3.5L | 213 |
- Engine Idler Pulley
- Product Attributes:
- Ancho de la polea (mm) (1): 70mm
- Bolt Head Type:
- Hex
- Hexagonal
- Grade Type:
- Equipo Original
- Oem
- Mounting Hardware Included:
- No
- Non
- Mounting Bolt Head Diameter: 0.3
- Groove Quantity: 32
- Inside Diameter: 1.72
- Pulley Width (mm): 70 Mm
- Pulley Diameter (mm): 69 Mm
- Color:
- Black
- Negro
- Noir
- Ancho de la rodadura de polea (mm): 69 Mm
- Bolt Diameter: 0.75
- Pulley Type:
- Correa V
- V-belt
- Diámetro de la polea (mm): 69 Mm
- Material:
- Black
- Negro
- Noir
- Belt Type:
- Correa V
- V-belt
- Contact Surface:
- Cogged
- Dentada
- Pulley Bearing Width (mm): 69 Mm
- Mounting Hole Diameter: 1.72
- Pulley 1 Flanged:
- Oui
- Sí
- Yes
- Cantidad de rodaduras de polea 1: 1 Ensamble De Manguera Del Calentador
- Bore Size: 0.75
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Pulley Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Heavy Duty Use:
- No
- Non
- Bearing Bore Inside Diameter: 0.75
- Pulley Bearing Quantity: 1
- Material Thickness:
- 0.125 In
- 0.125 In.
- Contenidos del paquete: 1 Polea
-
Features:
- Direct replacement - this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
- Restores performance - fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific - reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality - backed by team of engineers and quality specialists in the United States
- This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
This Part Fits the Following OEM/Substitute Numbers:
50101, HL3Z8678A, YS366
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- Dual Rad Fan Assembly
- w/Heavy Duty Radiator
- Product Attributes:
- Shroud Material:
- Plastic
- Plástico
- Connector Gender:
- Macho
- Male
- Housing Finish:
- Black
- Negro
- Noir
- Grade Type: Regular
- Fan 2 Diameter: 412
- Blade Material:
- Plastic
- Plástico
- Shroud Included:
- Oui
- Sí
- Yes
- Fan 1 Diameter: 388
- Motor Type:
- Brushed
- Cepillado
- Fan Rotation:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Flat Side On Shaft:
- Oui
- Sí
- Yes
- Fan 2 Blade Quantity: 5
- Material:
- Plastic
- Plástico
- Blade Type:
- Alabe De Alineación Hacia Adelante
- Forward Align Fin
- Shaft Diameter: 5
- Fan Clutch Mounted:
- Oui
- Sí
- Yes
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Terminal Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Hub Bolt Hole Diameter: 7.5
- Shroud Color:
- Black
- Negro
- Noir
- Fan 1 Blade Quantity: 5
- Fan Quantity: 2
- Contenidos del paquete: 1 Ensamblaje Del Ventilador De Enfriamiento
- Hub Bolt Hole Quantity: 6
- Terminal Gender:
- Macho
- Male
- Shroud Material:
-
Features:
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
This Part Fits the Following OEM/Substitute Numbers:
624570, HL3Z8C607B, HL3Z8C607C, HL3Z8C607D
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- 187 Degrees F Alternate Temperature Option
- Standard
This Part Fits the Following OEM/Substitute Numbers:
34229, 458190, 49229, 56552, 655-188, 65588, 9655188, BR3Z8575C, P65588
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- 190 Degrees F Alternate Temperature Option
- Standard
This Part Fits the Following OEM/Substitute Numbers:
34238, 34238S, 459180, 46238, 49229, 49238, 56559, 655-190, 65590, 9655190, BL3Z8575A, BR3Z8575C, BR3Z8575E, P65590, RT1227
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- Turbocharger Air Intercooler
- Product Attributes:
- Inlet Tank Material:
- Aluminio
- Aluminum
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- No
- Non
- Core Row Quantity: 17
- Inlet Fitting Gender:
- Female
- Hembra
- Outlet Outside Diameter: 2.75
- Core Length: 21
- Color:
- Black
- Gray
- Gris
- Negro
- Core Color: Natural
- Core Material:
- Aluminio
- Aluminum
- Contenidos del paquete: 1 Interenfriador
- Outlet Fitting Gender:
- Female
- Hembra
- Core Height: 3.25
- Inlet Outside Diameter: 3.25
- Type:
- Air Intercooler
- Interenfriador De Aire
- Inlet Tank Material:
-
Features:
- Ideal replacement - this intercooler matches the fit, function and performance of the original equipment intercooler
- Durable construction - this intercooler is made from corrosion-resistant aluminum
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone dimensional, corrosion and flow testing to ensure proper fit and performance
- This intercooler is a direct replacement for an original equipment intercooler that has failed from oil contamination or leaks. This part has undergone dimensional, corrosion and flow testing to ensure proper fit and performance.
This Part Fits the Following OEM/Substitute Numbers:
18073, 4401-1535, CAC24, FL3Z6K775B
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | Turbocharged | 213 |
- Engine Oil Cooler
- Product Attributes:
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Inlet Diameter: 2
- Mounting Hardware Included:
- No
- Non
- Core Tube:
- No
- Non
- Tube Included:
- No
- Non
- Core Tube Width: 0.43
- Outlet Outside Diameter: 2.1
- Finish: Natural
- Outlet Fitting Type:
- Macho
- Male
- Core Charge Applicable:
- No
- Non
- Color:
- Gris Metálico
- Metallic Gray
- Core Material:
- Aluminio
- Aluminum
- Base Height: 4.8
- Contenidos del paquete: 1 Enfriador De Aceite Del Motor
- Strap Included:
- No
- Non
- Inlet Fitting Type:
- Macho
- Male
- Inlet Outside Diameter: 2.12
- Cable Included:
- No
- Non
- Depth: 4
- Cable Material:
- No
- Non
- Outlet Diameter: 2
- Grade Type:
-
Features:
- Direct replacement - this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
- Ideal solution - engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.
This Part Fits the Following OEM/Substitute Numbers:
BL3Z6A642A, BL3Z6A642C, BL3Z6A642D, BL3Z6A642H, OCK24
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- 160 Degrees F Alternate Temperature Option; Temperature 160F
- Racing Thermostat
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- Dual Fan Assembly Without Controller
- w/Standard Duty Radiator
- Product Attributes:
- Shroud Material:
- Plastic
- Plástico
- Connector Gender:
- Macho
- Male
- Connector Quantity: 2
- Fan Quantity: 2
- Motor Type:
- Brushed
- Cepillado
- Contenidos del paquete: 1 Conjunto De Ventilador Del Radiador
- Terminal Quantity: 2
- Blade Material:
- Plastic
- Plástico
- Shroud Color:
- Black
- Negro
- Noir
- Shroud Included:
- Oui
- Sí
- Yes
- Shroud Material:
-
Features:
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
This Part Fits the Following OEM/Substitute Numbers:
623450, DG1Z8C607E, FL3Z8C607A, FL3Z8C607B, FL3Z8C607C, JL3Z8C607B
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
Showing 1 - 10 of 36 products
Loading...