2016 Jeep Compass Body Parts
Choose your Part Name for your 2016 Jeep Compass
Accelerator Pedal
Accelerator Pedal Sensor
Body Mount Nut
Bumper Reflector
Cargo Area Liner
Cargo Carrier
Cargo Holder
Door Hinge
Door Latch Assembly
Door Lock Actuator Motor
Door Lock Striker
Exterior Trim Fastener
Floor Mat Set
Grille Molding
Hood Insulation Pad Clip
Hood Light Pod
Liftgate Latch Bolt
Liftgate Lift Support
Push-In Fastener
Roof Rack
Roof Rack Mount Kit
Running Board
Running Board Mounting Bracket
Seat Cover
Seat Cushion Cover
Side Window Deflector
Tow Hook
Trailer Hitch
Trailer Hitch Coupler Lock
Trailer Hitch Lock
Truck Tool Box Lock and Key
Window Shade
Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Compass; Patriot
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes~Heat Shield Trimming Required~The 11th VIN Digit Is D
- CURT 13081 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Jeep Compass; Patriot
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Compass and Patriot (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Compass | L | 1998 | Rear | 4 Cyl 2.0L | 122 |
- 2nd Seat Floor Liner
- Black; 2 piece
- WB 2ND SEAT FLOOR LINER
- WeatherBeater(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Jeep Compass | Rear |
- M6 x 1.0 x 20 Torx Head Screw Liftgate Latch Mounting
- Liftgate Latch Bolt; M6 x 1.0 x 20 Torx Head Screw;
- Liftgate Latch Bolt
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Bumper Cover Mounting Bolt
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
- Hood
- Grille To Hood Grommet;
- Grille To Hood Grommet
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Grille To Hood Grommet
- Crown Automotive carries over 9600 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
- AeroTread 5in. x 67in. Polished Stainless Running Boards (No Brackets)
- 5 in.; Polished Stainless Aluminum; Mounting Brackets Sold Separately
- ARIES 2051867 AeroTread 67-Inch Polished Stainless Steel SUV Running Boards; Brackets Sold Separately
- AeroTread Running Boards
- Product Attributes:
- Side Component Type: Board
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Sleek Design w/Rounded Ends To Complement The Look Of Modern SUVs
- Extruded Aluminum Base To Be Lightweight And Rust-Free
- Polished Stainless Steel Front Trim Piece For Rust-Free Accent
- Flat Profile And 5 in. Width Provide Comfortable Step
- Full-Length/ Tough Plastic Treads Offer Reliable/Non-Skid Surface
- Universal Track Mounting System For Easy/ Secure Installation
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Running Boards
- For some, its more than just a drive. Its about definition -- finding the rush that comes with your hands on the wheel and your foot on the gas -- and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for todays crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5 in. wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicles frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
- Wiring Harness, 2 lamp Connection Adapter (1 EA)
- Ped: Auxiliary Driving Street Legal
- Used together with universal wiring harness to connect two LED lamps to one DT output.
- Product Attributes:
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Wire Length: 2' Wire
-
Features:
- DT connector adaptors: one male end and 2 female end.
- Used together with universal wiring harness to connect two LED lamps to one DT output.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
- Wiring Harness, 2 Outputs (1 EA)
- Ped: Auxiliary Driving Street Legal
- Universal wiring harness for auxiliary LED lamps to vehicle battery.
- Product Attributes:
- Power Consumption: N/a
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
-
Features:
- Wiring harness with 2 DT connectors
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
- Cargo Liner
- Black; For Cargo Area Behind 2nd Row Seats
- CS CARGO LINER
- Classic Style Cargo Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Our Cargo Liners Protect And Defend Your Trunk And Cargo Areas From Whatever You Throw At Them. These Liners Are Custom Fit With High Perimeter Edges And A Anti-slip Surface, Minimizing Slipping And Sliding As Well As Protecting Your Rig From Inevitable Spills And Mess.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
- Class 2 Trailer Hitch; 1-1/4in. Receiver; Select Jeep Compass; Patriot
- 3500lbs. Gross Trailer Weight; 300lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 12057 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Jeep Compass; Patriot
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 300
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Jeep Compass and Patriot (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 300 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Compass | L | 1998 | Rear | 4 Cyl 2.0L | 122 |
- AeroTread 5in. x 67in. Black Stainless Running Boards (No Brackets)
- 5 in.; Carbide Black Powder Coat Aluminum; Mounting Brackets Sold Separately
- ARIES 2051967 AeroTread 67-Inch Black Stainless Steel SUV Running Boards; Brackets Sold Separately
- AeroTread Running Boards
- Product Attributes:
- Side Component Type: Board
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Sleek Design w/Rounded Ends To Complement The Look Of Modern SUVs
- Extruded Aluminum Base To Be Lightweight And Rust-Free
- Stainless Steel Front Trim w/Carbide Black Powder Coat
- Flat Profile And 5 in. Width Provide Comfortable Step
- Full-Length/ Tough Plastic Treads Offer Reliable/Non-Skid Surface
- Universal Track Mounting System For Easy/ Secure Installation
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Running Boards
- For some, its more than just a drive. Its about definition -- finding the rush that comes with your hands on the wheel and your foot on the gas -- and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for todays crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5 in. wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicles frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Compass |
Showing 1 - 10 of 112 products
Loading...