2016 Mazda CX 3 Body Parts
Choose your Part Name for your 2016 Mazda CX-3
Image
Product
Price
- Front & 2nd Seat Floor Liners
- Tech Info: Liners fit all CX-3 models.
- Weatherbeater - Front & 2nd Seat Floor Liners
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Front And Second Rows
- Best Value: Yes
- CA Prop 65: Y
- Category: Weatherbeater Series
- Requires Drilling: No
- Driver Position: Left Hand Drive Only
-
Features:
- Our patented FormFit Design™ process gives you a glove-like, laser-tight fit to your make and model. Floorboards are 3D scanned to precisely match the contours of your vehicle.
- Our patented FormFit Edge™ features a raised ridge that runs along the door jam, protecting your truck, van, or SUV from all manner of muck.
- Over vinyl or carpet, our StayPut™ Cleats firmly lock to your factory anchors. It's rock-steady stability underfoot, only by Husky.
- Sporty, rugged, and built for a lifetime of non-stop abuse. Put unbeatable all-weather toughness to work on your floor.
- WeatherBeater™ Liners offer protection that extends all the way to your rear seats. So go ahead, lift the seats and leave them up, load after load. Husky’s got your floors, and your back, no matter what the road brings your way.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we’ll replace it.
- Proudly made in the USA.
- Easy to install, remove, and clean. Just yank it out, hose it down and carry on.
- The original all-weather liner is ready, come hell or hot coffee. The Weatherbeater's construction is a no-slip zone with zero edge curl, and its Stay Put Nibs keep it firmly anchored underfoot. It stands up to chemicals and stays tough and flexible, even under extreme temperatures. Its laser-scanned, FormFit Design™ gives your truck, van or SUV an ultra-clean look with easy cleanup to match, while its patented, FormFit Edge™ keeps spills contained, carpets unstained.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2016 - Mazda CX-3 | Front and Rear | United States |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Mazda CX-3
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 11418 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Mazda CX-3
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Mazda CX-3 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2016 - Mazda CX-3 | L | 1998 | Rear | 4 Cyl 2.0L | Grand Touring | 122 |
- Flexy Flare Rubber Fender Extensions Heavy Duty Extra Wide, 4-1/4" x 58" Pair
- Flexy Flare Rubber Fender Extensions Heavy Duty Extra Wide, 4-1/4" x 58" Pair
- 4" Extra Wide Standard Duty 2 Piece Kit
- Product Attributes:
- Width EA: 4.75
- Length EA: 58
- Height EA: 1 3/4
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- 2 1/2" Heavy Duty Steel Reinforced 4 Piece Kit
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- each piece measures 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Flexy Flare Rubber Fender Extensions Standard Duty, 2-1/2" x 58", 4 Piece Kit
- Flexy Flare Rubber Fender Extensions Standard Duty, 2-1/2" x 58", 4 Piece Kit
- 2 1/2" Standard Duty 4 Piece Kit
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- Pacers Universal Flexy Flare Rubber Fender Extenders are an inexpensive way to protect paint and body panels from dirt, rocks and road debris. Constructed of heavy duty 1/8" thick EPDM rubber, they include a built-in curvature to maintain their form and shape without distorting. These extend the fender a full 2 1/2" using a bolt on design for long lasting durability. Sold in a 4 piece kit, each piece measuring 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Outback F4 15" Mini LED Light Bar, Red
- Outback F4 15" Mini LED Light Bar, Red
- 14" Red Mini LED Bar
- Product Attributes:
- Bulb: Led
-
Features:
- Ultra Bright Light
- These compact yet powerful 11 red L.E.D. four function Outback F4 Mini Light Bars fit neatly between the tailgate and bumper of most popular full size pickup trucks. With running light, brake light and right and left turn signals they are functional and attractive additions to any full size pickup.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Flexy Flare Rubber Fender Extensions Heavy Duty, 2-1/2" x 58", 4 Piece Kit
- Flexy Flare Rubber Fender Extensions Heavy Duty, 2-1/2" x 58", 4 Piece Kit
- 2 1/2" Heavy Duty Non Steel Reinforced 4 Piece Kit
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- Pacers Universal Flexy Flare Rubber Fender Extenders are an inexpensive way to protect paint and body panels from dirt, rocks and road debris. Constructed of heavy duty 1/4" thick EPDM rubber, they include a built-in curvature to maintain their form and shape without distorting. These extend the fender a full 2 1/2" using a bolt on design for long lasting durability. Sold in a 4 piece kit, each piece measuring 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Flexy Flare Rubber Fender Exten. Extra Wide No Lip Side Mount, 4-1/4" x 58" Pair
- Flexy Flare Rubber Fender Exten. Extra Wide No Lip Side Mount, 4-1/4" x 58" Pair
- 4 1/4" No-Lip Side Mount Extra-Wide 2 Piece Kit
- Product Attributes:
- Width EA: 4.25
- Length EA: 58
- Height EA: 2 1/2
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Flexy Flare Rubber Fender Exten. X-Wide No Lip Side Mount, 4-1/4"x25' Bulk Roll
- Flexy Flare Rubber Fender Exten. X-Wide No Lip Side Mount, 4-1/4"x25' Bulk Roll
- 4 1/4" No-Lip Side Mount Extra-Wide 25' Bulk Roll
- Product Attributes:
- Width EA: 4.25
- Length EA: 25
- Height EA: 2 1/2
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
- Flexy Flare Rubber Fender Extensions Heavy Duty No-Lip, 2-1/2" x 58" Pair
- Flexy Flare Rubber Fender Extensions Heavy Duty No-Lip, 2-1/2" x 58" Pair
- 2 1/4" No-Lip Side Mount 2 Piece Kit
- Product Attributes:
- Width EA: 2.25
- Length EA: 58
- Height EA: 1 7/8
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mazda CX-3 |
Showing 1 - 10 of 35 products
Loading...