1971 Jeep J 2500 Brake Parts
Choose your Part Name for your 1971 Jeep J-2500
Image
Product
Price
- 11 in. x 2 in.
- Drum Brake Shoe And Lining; 11 in. x 2 in.;
- Drum Brake Shoe And Lining
-
Features:
- Drum Brake Shoe And Lining
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Rear |
- Rear For Use w/Rear Dana 53
- Axle Hub Key; Rear;
- Axle Hub Key
-
Features:
- Axle Hub Key
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1971 - Jeep J-2500 |
- Element3
- Product Attributes:
- Cylinder Bore Diameter: 1.125
This Part Fits the Following OEM/Substitute Numbers:
03142570, 03203309, 072-1696, 08124795, 134.64009, 135.64009, 18008405, 18290, 219-1409, 2514018, 2951, 3063, 3142570, 3203309, 3220, 33220, 33358, 3750358...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Front Left |
- Element3
- Product Attributes:
- Cylinder Bore Diameter: 1.125
This Part Fits the Following OEM/Substitute Numbers:
03142571, 03203310, 05997012, 072-1704, 08126745, 134.64010, 135.64010, 18008406, 18291, 219-1410, 2622907, 28-18291, 2950, 3142571, 3203310, 33221, 3750357, 5318291...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Front Right |
- Brake Hydraulic Hose
- 18 In. Length
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Brake Hose
- End 2 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Overall Length: 18 In
- Hose Material:
- ?ëlastom?¿re Epdm
- Caucho De Etileno Propileno Dieno
- Epdm Rubber
- Jacket Included:
- No
- Non
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Outer Sleeve Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- S?¡
- Yes
- Describe Type: Flexible Hose
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- End 1 Thread Size:
- 3/8 In-24
- 3/8"-24
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.68007, 1543003, 2203010, 350-54712, 610012, 769811, 87-46007, 88284, 8A2078, 964550, B916002, BH11146, BH11191, BH401120, F11191, HB-88007, NF1128
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Front Left |
- Brake Hydraulic Hose
- 18 In. Length
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Brake Hose
- End 2 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Overall Length: 18 In
- Hose Material:
- ?ëlastom?¿re Epdm
- Caucho De Etileno Propileno Dieno
- Epdm Rubber
- Jacket Included:
- No
- Non
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- 3/8 In-24
- 3/8"-24
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Outer Sleeve Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- S?¡
- Yes
- Describe Type: Flexible Hose
- Diámetro interior de la acoplación de extremo 2: 3/8"-24
- End 1 Thread Size:
- 3/8 In-24
- 3/8"-24
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Front Right |
- Brake Hose Lock
- 1 In. Diameter Package Quantity: 1
- Product Attributes:
- Color/Finish: Silver
- Package Contents: Brake Hose Locks
- Color/Acabado: Plateado
- Diámetro interior (in): 0.01 In.
- Contenidos del paquete: Bloqueo De La Manguera Del Freno
-
Features:
- Direct replacement - this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
1457, F3052S, H1457, H1457-2, H14572, H1457DP, H1457K, H3052S
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Front |
- R-Line
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Service Type: Per Axle
This Part Fits the Following OEM/Substitute Numbers:
086-026, 118.68001, 4007137, 4017137, 7137, 79-46000, 795135, BK7137, DK1047, F87352, F87352S, H7137, H7137DP, H920532, HK4031, HW7137
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Front |
- with 11 IN Brakes; 1" Bore Diameter
- Element3
- Product Attributes:
- Cylinder Bore Diameter: 1.000
This Part Fits the Following OEM/Substitute Numbers:
134.65006, 135.65006, 28-57146, 33725, 37132, 512046, 5337132, 602278, 67-92-270, 784-42006, 78837132, 84-42006, 937959, BRWC4, BX3210060, C5TZ2262B, CW163, D6TZ2262A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Rear Left |
- with 11 IN Brakes; 1" Bore Diameter
- Element3
- Product Attributes:
- Cylinder Bore Diameter: 1.000
This Part Fits the Following OEM/Substitute Numbers:
134.65007, 135.65007, 28-57147, 33726, 37133, 512047, 5337133, 67-92-280, 784-42007, 78837133, 84-42007, 937960, BRWC5, C5TZ2261D, CW164, D6TZ2261A, E2TZ2261B, EW13388...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep J-2500 | Rear Right |
Showing 1 - 10 of 19 products
Loading...