2010 Land Rover Range Rover Sport Brake Parts
Choose your Part Name for your 2010 Land Rover Range Rover Sport
ABS Wheel Speed Sensor
Brake Backing Plate
Brake Hydraulic Hose
Brake Master Cylinder
Disc Brake Caliper
Disc Brake Caliper Bolt
Disc Brake Caliper Bracket Mounting Bolt
Disc Brake Caliper Pin Boot
Disc Brake Kit
Disc Brake Pad Set
Disc Brake Pad Wear Sensor
Disc Brake Rotor
Parking Brake Adjuster
Parking Brake Cable
Parking Brake Hardware Kit
Parking Brake Shoe
Parking Brake Shoe Set
Power Brake Booster
Power Brake Booster Vacuum Pump
Power Brake Booster Vacuum Pump Seal
Trailer Brake Control Harness
Image
Product
Price
- Brake Controller Harness; Select Ford; Land Rover; Lincoln; Mercury (Packaged)
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug; Package Install Time 5 Minutes
- CURT 51323 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks and SUVs
- Brake Control Adapter Harness
- Product Attributes:
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Land Rover Range Rover Sport |
- Brake Controller Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks; SUVs
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug Install Time 5 Minutes
- CURT 51322 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks and SUVs
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Land Rover Range Rover Sport |
- StopTech Sport Cross Drilled Brake Rotor; Rear Right
- 365mm Rear Disc Brembo Front Calipers
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction; European style brake pad compounds. Drilled for increased bite; improved looks and better performance
- StopTech Sport Cross-Drilled Disc Brake Rotors
-
Features:
- Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal. Especially effective with higher friction
- European style brake pad compounds. Drilled for increased bite
- improved looks and better performance
- StopTech Drilled Sport Rotors are 1-piece direct replacement brake discs for factory brake systems and stock calipers that look great behind your wheels and offer significantly improved braking performance. The unique cross-drilling aids with heat and brake dust dispersal; prevents glazing of the pads; adds bite and improves wet and dry braking performance. Built to last; the black e-coating provides protection from corrosion and the high carbon metallurgy (in most applications) offers quieter operation; better crack resistance and increased performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Rear Right | Supercharged |
- OE Pad Material is Semi-Metallic
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 7.470
- Outer Pad Height: 3.660
- Outer Pad Width: 7.470
- Inner Pad Height: 3.660
- Inner Pad Overall Thickness: 0.600
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.600
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
089-1971, 104.14260, 16-1426, 17-1426, 300.14260, 305.14260, 308.14260, 355016151, 500.14260, BP1426, LR016684, LR020362, LR110075
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Front | Supercharged |
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 17.20
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.20
- Brake System: Lucas
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 116.90
- Outer Pad Height: 46.30
- Outer Pad Width: 116.90
- Pad Shims Included: Yes
- Inner Pad Height: 46.30
- Chamfered Edges: Yes
- Friction Material Composition: Low-metallic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1099 8541, D1099 8666, EUR1099, LR015519, LR019627, LR032060, LR032377, LR032903, LR055454, LR055455
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Rear | HSE |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 17.10
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.10
- Brake System: Trw
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 116.60
- Outer Pad Height: 63.00
- Outer Pad Width: 116.60
- Pad Shims Included: Yes
- Inner Pad Height: 63.00
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1427 8544, LR015577, LR025739
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Rear | Supercharged |
- PRIME Low-Met
- Product Attributes:
- Inner Pad Overall Thickness: 17.10
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 17.10
- Brake System: Trw
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 116.70
- Outer Pad Height: 62.90
- Abutment Clips Included: Yes
- Outer Pad Width: 116.70
- Pad Shims Included: Yes
- Inner Pad Height: 62.90
- Chamfered Edges: Yes
- Friction Material Composition: Low-metallic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1427 8544, LR015577, LR025739, PGD1427M, SP1427EUH
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Rear | Supercharged |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Width: 189.60
- Outer Pad Height: 96.00
- Outer Pad Width: 189.60
- Pad Shims Included: Yes
- Inner Pad Height: 96.00
- Inner Pad Overall Thickness: 16.70
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 16.70
- Brake System: Brembo
- Brake Lubricant Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1426 8543, LR0 16684, LR0 20362, LR0 64181, LR0 83935, LR0 93886, LR016684, LR020362, LR064181, LR1 10075, LR1 10087, LR1 14004
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Front | Supercharged |
- PRIME Ceramic
- Product Attributes:
- Inner Pad Overall Thickness: 18.40
- Mounting Hardware Included: Yes
- Outer Pad Overall Thickness: 18.40
- Brake System: Trw
- Brake Lubricant Included: Yes
- Features: With Hardware
- Inner Pad Width: 192.50
- Outer Pad Height: 72.50
- Outer Pad Width: 192.50
- Pad Shims Included: Yes
- Inner Pad Height: 72.50
- Chamfered Edges: Yes
- Friction Material Composition: Ceramic
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1425 8542, EUR1425, LR015578, LR016962, LR026221
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Front | Naturally Aspirated |
- PRIME Low-Met
- Product Attributes:
- Inner Pad Width: 192.60
- Outer Pad Height: 72.10
- Outer Pad Width: 192.60
- Pad Shims Included: Yes
- Inner Pad Height: 72.10
- Inner Pad Overall Thickness: 18.40
- Chamfered Edges: Yes
- Friction Material Composition: Low-metallic
- Outer Pad Overall Thickness: 18.40
- Brake System: Trw
- Brake Lubricant Included: Yes
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1425 8542, EUR1425, LR015578, LR016962, LR021253, LR026221, LR051626, PGD1425M
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2010 - Land Rover Range Rover Sport | Front | Naturally Aspirated |
Showing 1 - 10 of 198 products
Loading...