2014 Land Rover Range Rover Sport Brake Parts
Choose your Part Name for your 2014 Land Rover Range Rover Sport
ABS Wheel Speed Sensor
Disc Brake Caliper
Disc Brake Caliper Bolt
Disc Brake Caliper Bracket Mounting Bolt
Disc Brake Caliper Pin Boot
Disc Brake Caliper Pin Seal
Disc Brake Kit
Disc Brake Pad Set
Disc Brake Pad Wear Sensor
Disc Brake Rotor
Parking Brake Actuator
Power Brake Booster Vacuum Pump
Trailer Brake Control Harness
Image
Product
Price
- Brake Controller Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks; SUVs
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug Install Time 5 Minutes
- CURT 51322 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks and SUVs
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Land Rover Range Rover Sport |
- Brake Controller Harness; Select Ford; Land Rover; Lincoln; Mercury (Packaged)
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug; Package Install Time 5 Minutes
- CURT 51323 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks and SUVs
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Land Rover Range Rover Sport |
- OE Pad Material is Semi-Metallic
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 7.470
- Outer Pad Height: 3.660
- Outer Pad Width: 7.470
- FMSI Number: D1426-8543
- Inner Pad Height: 3.660
- Inner Pad Overall Thickness: 0.600
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.600
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
089-1971, 104.14260, 16-1426, 17-1426, 300.14260, 305.14260, 308.14260, 355016151, 500.14260, BP1426, LR016684, LR020362, LR110075
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Front | Autobiography |
- Rotor Diameter 350 MM; w/o Brembo Brakes
- R-Line
- Product Attributes:
- Overall Height:
- 1.925
- 48.900
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.571
- 14.500
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 238.000
- 9.370
- Center Hole Diameter:
- 3.110
- 79.000
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.984
- 25.000
- Surface Type: Smooth
- Outside Diameter:
- 13.780
- 350.000
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.866
- 22.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 120.000
- 4.724
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
121.22027, 125.22027, 126.22027CSL, 126.22027CSR, 126.22027SL, 126.22027SR, 127.22027L, 127.22027R, 128.22027L, 128.22027R, 320.22027, 320.22027H, 921557RGS, BD180858E, BR901396, EBR1496EVC, LR033302, LR099036...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Land Rover Range Rover Sport | Rear |
- Premium Low-Met OE Equivalent Pad
- Product Attributes:
- WVA: 25021 / 25022 / 25203;25204
- Nominal Thickness (MM): 18.6
- Suface Finishing: Chamfered & Slotted
- Brake System: Trw
- Wear Indicator: Prepared For Wear Indicator
- FMSI: 8542-d1479
- Features: With Hardware
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels. Designed with the European car owner in mind, Brembo's Low-Met Brake Pads are formulated for superior braking performance in all driving conditions. Brembo's Low-Met formulations are comparable to the OE with all Low-Met pads receiving an ECE-R90 approval.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1479 8542, LR021253, LR026220, LR032063, LR051626
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Front | SE |
- Premium NAO Ceramic OE Equivalent Pad
- Product Attributes:
- WVA: 24659
- Nominal Thickness (MM): 16.7
- Suface Finishing: Chamfered & Slotted
- Brake System: Brembo
- Wear Indicator: Prepared For Wear Indicator
- FMSI: 8543-d1426
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1426 8543, LR016684, LR020362, LR064181
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Front | Supercharged |
- Premium Low-Met OE Equivalent Pad
- Product Attributes:
- WVA: 25720
- Nominal Thickness (MM): 17.3
- Suface Finishing: Chamfered
- Brake System: Trw
- Wear Indicator: Prepared For Wear Indicator
- FMSI: 8919-d1692
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels. Designed with the European car owner in mind. Brembo's Low-Met Brake Pads are formulated for superior braking performance in all driving conditions. Brembo's Low-Met formulations are comparable to the OE with all Low-Met pads receiving an ECE-R90 approval.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1692 8919, LR036574, LR065492, LR068303, LR079910, LR079935
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Rear | SE |
- Premium NAO Ceramic OE Equivalent Pad
- Product Attributes:
- WVA: 25021 / 25022 / 25203;25204
- Nominal Thickness (MM): 18.6
- Suface Finishing: Chamfered & Slotted
- Brake System: Trw
- Wear Indicator: Prepared For Wear Indicator
- FMSI: 8542-d1479
- Features: With Hardware
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1479 8542, LR021253, LR026220, LR032063, LR051626
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Front | HSE |
- Premium NAO Ceramic OE Equivalent Pad
- Product Attributes:
- WVA: 25720
- Nominal Thickness (MM): 17.3
- Suface Finishing: Chamfered
- Brake System: Trw
- Wear Indicator: Prepared For Wear Indicator
- FMSI: 8919-d1692
- Features: With Hardware
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1692 8919, LR036574, LR065492, LR068303, LR079910, LR079935
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Rear | HSE |
- Premium Low-Met OE Equivalent Pad
- Product Attributes:
- WVA: 24659
- Nominal Thickness (MM): 16.7
- Suface Finishing: Chamfered & Slotted
- Brake System: Brembo
- Wear Indicator: Prepared For Wear Indicator
- FMSI: 8543-d1426
- Specifically designed for the North American market, this Brembo formulated friction material with premium shim offers comfortable, quiet, smooth braking and cleaner wheels. Designed with the European car owner in mind, Brembo's Low-Met Brake Pads are formulated for superior braking performance in all driving conditions. Brembo's Low-Met formulations are comparable to the OE with all Low-Met pads receiving an ECE-R90 approval.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
D1426 8543, LR016684, LR020362, LR064181, LR093886
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Land Rover Range Rover Sport | Front | Autobiography |
Showing 1 - 10 of 148 products
Loading...