1967 Plymouth Barracuda Driveline and Axles Parts
Choose your Part Name for your 1967 Plymouth Barracuda
Image
Product
Price
- Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter
- Eaton Elocker™ Differential; Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter;
- Eaton Elocker™ Differential
-
Features:
- Electromagnetic Locking Differential
- Driver controlled push-button operation
- Most Reliable On-Demand Differential
- 4 Pinion Net-Forged Gear Design For Max Strength And Durability
- Eaton NGR locking rocker switch and wiring harness included
- Direct Acting Operation Remains Locked Forward And Reverse
- The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The direct acting mechanism activates in .14 second to provide 100% instant axle lock, and remains locked in both forward and reverse.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Rear |
- 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60
- Detroit Truetrac® Differential; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60;
- Detroit Truetrac® Differential
-
Features:
- Helical Gear Limited Slip Differential
- Optimized Torque Bias Ratios Deliver Max Acceleration And Handling
- Automatic Engagement
- Works In Forward And Reverse
- Ideal For Most Vehicles
- Durable
- Smooth
- Quiet Operation
- No Special Lubrication Or Friction Modifiers Needed
- The Detroit Truetrac is a helical-gear style, limited-slip differential that maximizes wheel traction and enhances driving characteristics. Maintenance-free, it features smooth, automatic operation in forward and reverse. Its versatility makes Detroit Truetrac the ideal traction solution for almost any type of vehicle.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Rear |
- Chrome; 1.790 in. Dia.; 2 piece
- Dust Cap; Front; Chrome; 1.790 in. Dia.; 2 pc.;
- Dust Cap
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.790 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Diameter (in.): 1.790 In.
- Package Quantity: 2
-
Features:
- Add A Finished Look
- Heavy Chrome Plated
- Easy Installation
- 2 Per Set
- If you have custom steel or mag wheels that are not designed without a provision for a center cap, youre probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Front |
- Chrome; 1.790 in. Dia.; 2 piece
- Dust Cap; Front; Chrome; 1.790 in. Dia.; 2 pc.;
- Dust Cap
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.790 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Diameter (in.): 1.790 In.
- Package Quantity: 2
-
Features:
- Add A Finished Look
- Heavy Chrome Plated
- Easy Installation
- 2 Per Set
- If you have custom steel or mag wheels that are not designed without a provision for a center cap, youre probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Front |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone with 10 (in) Brakes
- National A-6 Taper Bearing Set
- Product Attributes:
- Width (Inch): 0.6250
- Cone Length (Inch): 0.6600
- Cone Bore (MM): 31.7500
- Cone Length (MM): 16.7640
- Cup Radius (MM): 1.1680
- Standout (MM): 4.0640
- Taper Bearing Cone: Lm67048
- Cone Bore (Inch): 1.2500
- Cup Length (Inch): 0.4650
- Cup Bore (Inch): 2.3280
- Standout (Inch): 0.1600
- Taper Bearing Cup: Lm67010
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 59.1310
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009815805, 0019810805KZ, 009-311-219, 010-409-607, 010409607, 051-3842, 0635 501 008, 102720A, 11055119, 11407629, 11900.21413.01, 1243-33-047, 12541277, 12547209, 1271495, 136903, 142919, 1615339...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Front Inner |
- Oil Seal
- with 7.25 (in) Ring Gear with Chrysler Axle
- National 8516N Oil Seal
- Product Attributes:
- Shaft (Inch): 1.687
- Sealing Material: Polyacrylate
- Width (Inch): 0.437
- Flanged Outside Diameter (Inch): 2.772
- Inside Diameter:
- 1.687
- 42.850
- Flanged Outside Diameter (MM): 70.410
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.623
- Outside Diameter:
- 2.627
- 66.730
- Outside Diameter (Inch): 2.627
- Shaft (MM): 42.850
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
0704-H648, 16805, 16945, 2070113, 24014411.25, 24014412, 2404134, 2881041, 29231, 29244, 4338655, 46316, 47467, 52067595, 60440, 84676, 8516N, A46843...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Rear Outer |
- Greaseable Premium Universal Joint
- Conventional Lube Fitting In Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-6301, 114-266, 114-267, 114-2HD, 114-2HP, 1306, 2-6302, 20030, 20205, 210-1306, 215-1306, 26302, 286300G, 45U0117, 5-1306X, 51306XU, 5589X, 5789X...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1967 - Plymouth Barracuda | L | 3687 | At Rear Axle | 6 Cyl 3.7L | 225 |
- Greaseable Premium Universal Joint
- Conventional Lube Fitting In Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1967 - Plymouth Barracuda | L | 3687 | At Transmission | 6 Cyl 3.7L | 225 |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone with 8.75 (in) Ring Gear
- National A-7 Taper Bearing Set
- Product Attributes:
- Cone Radius (MM): 0.7620
- Width (Inch): 1.0100
- Cone Length (Inch): 0.8700
- Cone Bore (MM): 39.7000
- Cone Length (MM): 22.0980
- Cup Radius (MM): 2.2860
- Taper Bearing Cone: M201047s
- Cone Bore (Inch): 1.5630
- Cone Radius (Inch): 0.0300
- Footnote: Includes Lock Ring R-210047
- Cup Length (Inch): 0.8400
- Cup Bore (Inch): 2.8750
- Taper Bearing Cup: M201011
- Cup Radius (Inch): 0.0900
- Cup Bore (MM): 73.0250
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2467102, 2525414, 2525415, 2808586, 3420089, 3420094, 3621992, 3621993, 3683956, 3683957, 3683966, 9428619, A-7, A7, BR7, BT7S, C6TZ-1225A, FS7...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Rear Outer |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone with 9 (in) Brakes
- National A-4 Taper Bearing Set
- Product Attributes:
- Cone Radius (MM): 3.5560
- Width (Inch): 0.5600
- Cone Length (Inch): 0.5800
- Cone Bore (MM): 26.9880
- Cone Length (MM): 14.7320
- Cup Radius (MM): 1.1680
- Standout (MM): 3.5560
- Taper Bearing Cone: L44649
- Cone Bore (Inch): 1.0625
- Cone Radius (Inch): 0.1400
- Cup Length (Inch): 0.4200
- Cup Bore (Inch): 1.9800
- Standout (Inch): 0.1400
- Taper Bearing Cup: L44610
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 50.2920
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-3843, 054470, 11054479, 11527973, 11600.21413.00, 132066, 14091909, 183834, 183834-1, 20339D, 2072712, 2421062, 2634105, 3024E-1200A, 3024E-1200A1, 31-21-2-634-105, 311-405-615, 311-405-625...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1967 - Plymouth Barracuda | Front Inner |
Showing 1 - 10 of 24 products
Loading...