1977 Dodge B200 Driveline and Axles Parts
Choose your Part Name for your 1977 Dodge B200
Axle Differential Bearing
Differential
Differential Cover Gasket
Differential Drive Pinion Gear Nut
Differential Pinion Bearing
Differential Pinion Race
Differential Pinion Seal
Differential Ring and Pinion
Drive Axle Shaft Bearing Kit
Drive Shaft Center Support
Drive Shaft Pinion Yoke Washer
Universal Joint
Wheel Bearing
Wheel Bearing and Race Set
Wheel Seal
Image
Product
Price
- Differential Drive Pinion Gear Nut
- with Dana 60 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | Rear Differential |
- PINION NUT WASHER
- with Dana 60 Axle
- FSGR
- Product Attributes:
- Inner Diameter: 0.898
- Outer Diameter: 1.500
- Thickness: 0.119
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
2510523C1, AUH224501, DS30275, SP 30275
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | Rear Differential |
- Differential Drive Pinion Gear Nut
- with Dana 60 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
2510524C1, DS30271, SP 30271
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | Rear Differential |
- PINION NUT WASHER
- with Dana 60 Axle
- FSGR
- Product Attributes:
- Inner Diameter: 0.898
- Outer Diameter: 1.500
- Thickness: 0.119
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | Rear Differential |
- Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter
- Eaton Elocker™ Differential; Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter;
- Eaton Elocker™ Differential
-
Features:
- Electromagnetic Locking Differential
- Driver controlled push-button operation
- Most Reliable On-Demand Differential
- 4 Pinion Net-Forged Gear Design For Max Strength And Durability
- Eaton NGR locking rocker switch and wiring harness included
- Direct Acting Operation Remains Locked Forward And Reverse
- The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The direct acting mechanism activates in .14 second to provide 100% instant axle lock, and remains locked in both forward and reverse.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1977 - Dodge B200 | V | 7211 | Front | 8 Cyl 7.2L | 440 |
- Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter
- Eaton Elocker™ Differential; Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter;
- Eaton Elocker™ Differential
-
Features:
- Electromagnetic Locking Differential
- Driver controlled push-button operation
- Most Reliable On-Demand Differential
- 4 Pinion Net-Forged Gear Design For Max Strength And Durability
- Eaton NGR locking rocker switch and wiring harness included
- Works In Forward And Reverse
- The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The ELocker is the most reliable on-demand differential, featuring selectable operation and net-forged gears for added strength.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1977 - Dodge B200 | V | 7211 | Front | 8 Cyl 7.2L | 440 |
- Differential Cover Gasket
- with 12 Bolt Holes with 9.25in Ring Gear ; Chrysler
- FEL-PRO RDS 55073 Differential Cover Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
36013, 53007762, DS14213, P29352, P29352TC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | Rear |
- Differential Cover Gasket
- with 10 Bolt Holes with 8.375in Ring Gear ; Chrysler
- FEL-PRO RDS 55047 Differential Cover Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
2852922, 36012, 4049689, DS14211, DT007, P18564, P18564TC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | Rear |
- Greaseable Premium Universal Joint
- Conventional Lube Fitting In Body with 2-1/8 (in) Outside Diameter Yoke Span Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-6301, 114-266, 114-267, 114-2HD, 114-2HP, 1306, 2-6302, 20030, 20205, 210-1306, 215-1306, 26302, 286300G, 45U0117, 5-1306X, 51306XU, 5589X, 5789X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | At Transmission |
- Greaseable Premium Universal Joint
- Conventional Lube Fitting In Body with 2-1/8 (in) Outside Diameter Yoke Span Premium with Lube Fitting in Body
- MOOG Greaseable Premium 315G U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.078
- 27.4
- Bearing Diameter A - mm: 27.3
- Length Axis 1:
- 2.125
- 54.0
- Length Axis 2:
- 2.125
- 54.0
- Length A - Inch: 2.125
- OE Series: Detroit 7260
- Length A - mm: 54.0
- Bearing Diameter A - Inch: 1.078
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.078
- 27.3
- Bearing Diameter B - Inch: 1.078
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.125
- Length B - mm: 54.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.4
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1977 - Dodge B200 | At Rear Axle |
Showing 1 - 10 of 46 products
Loading...