2007 Chrysler Sebring Driveline and Axles Parts
Choose your Part Name for your 2007 Chrysler Sebring
Image
Product
Price
- Axle Seal; Front;
- Axle Seal
-
Features:
- Axle Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Chrysler Sebring | Front |
- Front Wheel Bearing and Hub Assembly
- MOOG 513263 Front Wheel Bearing and Hub Assembly for Chrysler 200
- Product Attributes:
- Flange Bolt Hole Quantity: 4
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 69.000
- Flange Offset: 48.600
- Flange Shape: Modified
- Bolt Circle Diameter:
- 114.300
- 4.500
- Hub Pilot Diameter: 85.000
- Wheel Pilot Diameter: 67.000
- Spline Quantity: 32
- Flange Diameter: 141.000
- Wheel Stud Quantity: 5
-
Features:
- RELIABLE PERFORMANCE -- Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE -- Application-specific advanced raceway design reduces stress, rotation and heat on components
- EASY TO INSTALL -- Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION -- Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
BR930711, 05085406AA, 05085406AB, 05085406AC, 102051, 400.63014, 400.63014E, 5085406AA, 5085406AB, 5085406AC, 5105233AB, 5105233AC, 5154211AA, 713263, 7200011, BR930711, BRG BR930711, DL513263...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Front | 4-Wheel ABS |
- Taper Bearing Set Includes Cup and Cone
This Part Fits the Following OEM/Substitute Numbers:
04567022, 051-3869, 05143673AA, 09265-38001, 0K01A-33-075, 0K211-27-350A, 0S231-33-075, 2209810805, 26046759, 26046795, 3125.19, 3699676, 3699677, 370016, 3780531, 38-01118, 38-01518, 4269676...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|---|
| 2007 - Chrysler Sebring | Automatic | Right | 4 | 40TES |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Chrysler Sebring | Rear | Touring |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Rear | Non-ABS |
- Front Wheel Bearing Hub Assembly For Chrysler 200 Dodge Avenger Sebring Caliber
- Kugel Front Wheel Bearing Hub Assembly 70-513263 For Chrysler 200 Dodge Avenger Sebring Caliber
- Kugel
- Product Attributes:
- Flange Offset: 48.5
- WebNameEbay4: For Chrysler 200 Dodge Avenger Front Wheel Bearing Hub Assembly 70-513263
- Anti Lock Braking System Type: Encoder
- ComponentsSummaryLongWithBrands: 1x Front Kugel Wheel Bearing And Hub Assembly
- WebNamePlain: Kugel Front Wheel Bearing Hub Assembly 70-513263
- ComponentsSummaryShortWithBrands: Kugel Wheel Bearing And Hub Assembly
- Inside Diameter: 36.5
- ComponentsSummaryLong: 1x Front Wheel Bearing And Hub Assembly
- WebNameShort: Front Wheel Bearing Hub Assembly 70-513263 For Chrysler 200 Dodge Avenger Sebring Caliber
- Hub Pilot Diameter: 85
- WebNameEbay: Front Wheel Bearing Hub Assembly For Chrysler 200 Dodge Avenger Sebring Caliber
- Wheel Stud Size: M12 X 1.5
- Bolt Circle Diameter: 114.3
- ComponentsSummaryRegularWithBrands: Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryShort: Wheel Bearing And Hub Assembly
- Spline Quantity: 32
- Wheel Stud Quantity: 5
- NumberOfPieces: 1
- Brake Pilot Diameter: 69
- Anti Lock Brake Sensor Included: No
- Anti Lock Braking System: Yes
- WebNameLong: Kugel Front Wheel Bearing Hub Assembly 70-513263 For Chrysler 200 Dodge Avenger Sebring Caliber
- Wheel Stud Included: Yes
- ComponentsSummaryRegular: Wheel Bearing And Hub Assembly
- WebNameRegular: Kugel Front Wheel Bearing Hub Assembly 70-513263 For Chrysler 200 Dodge Avenger Sebring Caliber
- Wheel Pilot Diameter: 67
- Bearing Type: Ball
- WebNameEbay2: [front] Wheel Bearing Hub Assembly 70-513263 For Chrysler 200 Dodge Avenger
- WebNameEbay3: Wheel Bearing Hub Assembly Front 70-513263 For Chrysler 200 Dodge Avenger
- Flange Diameter: 141.3
-
Features:
- Core made of High-Carbon AISI 52100 Chromium Alloy Steel features higher wear resistance, fatigue strength and steel hardness
- Premium quality MolyPro™ NLGI Grade 2 Molybdenum Grease (MoS2) to minimize wear and reduce friction providing longer lasting performance
- Exclusive multi-lip seals are made with ProSeal™ Nitrile Rubber (NBR) which can successfully function at high delta of temperatures while retaining its flexibility and sealing performance
- Inner rings are made of Case-Hardened Steel for improved resistance to surface wear and contact fatigue
- Thickness and metallurgy electronically validated for manufacturing consistency
- SAE J1714, J2525 and J2535 validated for OEM load-carrying capacity, durability, and performance characteristics
- Bearing already mounted and secured on the assembly to required OE torque specification for easier and faster installation
- Coated wheel studs resist corrosion and rust for easier removal and proper torquing
- Part Reference Numbers : WE60909 WH513263 WH513264 124263 H513263 H513264 513264 513263 BR930711 HA590219 TRB-513263
- Kugel is the definitive name in the world of Bearing and CV Axle manufacturing, renowned for its unwavering commitment to quality, innovation, and superior performance. With a rich legacy spanning decades, Kugel has solidified its position as a global leader in the industry. We understand that precision and reliability are paramount when it comes to wheel bearings and CV axle. Our cutting-edge manufacturing processes, coupled with state-of-the-art technology, ensure that every Kugel bearing and CV axle exceeds the highest industry standards. When you choose Kugel, you can expect unparalleled durability, exceptional quality, and unrivaled performance. Our bearings are meticulously tested to withstand the toughest conditions, providing longevity and peace of mind to our customers. Experience the pinnacle of bearing and CV axle excellence with Kugel – where quality meets performance, and reliability drives success. Trust Kugel to keep your wheels turning smoothly, every mile of the way.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
513263, 513264, BR930711, H513263, H513264, HA590219, WE60909
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Front | Non-ABS |
- Front Wheel Bearing And Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebrin
- Kugel Front Wheel Bearing And Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebring Caliber - Left Right Side (Driver Passenger) K70-100318
- Kugel
- Product Attributes:
- WebNameEbay4: For Chrysler 200 Dodge Avenger Sebring Front Wheel Bearing And Hub Assembly Pair
- ComponentsSummaryRegularWithBrands: 2x Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryShort: 2x Bearing Hub Assembly
- ComponentsSummaryLongWithBrands: 2x Front Kugel Wheel Bearing And Hub Assembly (both Side)
- WebNamePlain: Kugel Front Wheel Bearing And Hub Assembly Pair K70-100318
- ComponentsSummaryShortWithBrands: 2x Kugel Bearing Hub Assembly
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Front Wheel Bearing And Hub Assembly (both Side)
- WebNameLong: Kugel Front Wheel Bearing And Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebring Caliber - Left Right Side (driver Passenger) K70-100318
- WebNameShort: Front Wheel Bearing And Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebring Caliber K70-100318
- ComponentsSummaryRegular: 2x Wheel Bearing And Hub Assembly
- WebNameRegular: Kugel Front Wheel Bearing And Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebring Caliber - Left Right Side (driver Passenger) K70-100318
- WebNameEbay2: [front] Wheel Bearing & Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebring
- WebNameEbay3: Wheel Bearing And Hub Assembly Front Pair For Chrysler 200 Dodge Avenger Sebring
- WebNameEbay: Front Wheel Bearing And Hub Assembly Pair For Chrysler 200 Dodge Avenger Sebring
-
Features:
- Core made of High-Carbon AISI 52100 Chromium Alloy Steel features higher wear resistance, fatigue strength and steel hardness
- Premium quality MolyPro™ NLGI Grade 2 Molybdenum Grease (MoS2) to minimize wear and reduce friction providing longer lasting performance
- Exclusive multi-lip seals are made with ProSeal™ Nitrile Rubber (NBR) which can successfully function at high delta of temperatures while retaining its flexibility and sealing performance
- Inner rings are made of Case-Hardened Steel for improved resistance to surface wear and contact fatigue
- Thickness and metallurgy electronically validated for manufacturing consistency
- SAE J1714, J2525 and J2535 validated for OEM load-carrying capacity, durability, and performance characteristics
- Bearing already mounted and secured on the assembly to required OE torque specification for easier and faster installation
- Coated wheel studs resist corrosion and rust for easier removal and proper torquing
- Kit Includes: 2x Front Wheel Bearing and Hub Assembly (Both Side)
- Part Reference Numbers : WE60909 WH513263 WH513264 124263 H513263 H513264 513264 513263 BR930711 HA590219 TRB-513263
- Kugel is the definitive name in the world of Bearing and CV Axle manufacturing, renowned for its unwavering commitment to quality, innovation, and superior performance. With a rich legacy spanning decades, Kugel has solidified its position as a global leader in the industry. We understand that precision and reliability are paramount when it comes to wheel bearings and CV axle. Our cutting-edge manufacturing processes, coupled with state-of-the-art technology, ensure that every Kugel bearing and CV axle exceeds the highest industry standards. When you choose Kugel, you can expect unparalleled durability, exceptional quality, and unrivaled performance. Our bearings are meticulously tested to withstand the toughest conditions, providing longevity and peace of mind to our customers. Experience the pinnacle of bearing and CV axle excellence with Kugel – where quality meets performance, and reliability drives success. Trust Kugel to keep your wheels turning smoothly, every mile of the way.
This Part Fits the Following OEM/Substitute Numbers:
513263, BR930711, H513263, HA590219, TRB-513263
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Front | 4-Wheel ABS |
- Rear Wheel Bearing Hub Assembly For Dodge Caliber Avenger Chrysler Sebring
- Kugel Rear Wheel Bearing Hub Assembly 70-512331 For Dodge Caliber Avenger Chrysler Sebring
- Kugel
- Product Attributes:
- Flange Offset: 60.50
- WebNameEbay4: For Dodge Caliber Avenger Chrysler Rear Wheel Bearing Hub Assembly 70-512331
- ComponentsSummaryLongWithBrands: 1x Rear Kugel Wheel Bearing And Hub Assembly
- WebNamePlain: Kugel Rear Wheel Bearing Hub Assembly 70-512331
- ComponentsSummaryShortWithBrands: Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryLong: 1x Rear Wheel Bearing And Hub Assembly
- WebNameShort: Rear Wheel Bearing Hub Assembly 70-512331 For Dodge Caliber Avenger Chrysler Sebring
- Hub Pilot Diameter: 74.00
- WebNameEbay: Rear Wheel Bearing Hub Assembly For Dodge Caliber Avenger Chrysler Sebring
- Wheel Stud Size: M12 X 1.5
- Bolt Circle Diameter: 114.30
- ComponentsSummaryRegularWithBrands: Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryShort: Wheel Bearing And Hub Assembly
- Wheel Stud Quantity: 5
- NumberOfPieces: 1
- Anti Lock Brake Sensor Included: No
- Brake Pilot Diameter: 80.00
- Anti Lock Braking System: No
- WebNameLong: Kugel Rear Wheel Bearing Hub Assembly 70-512331 For Dodge Caliber Avenger Chrysler Sebring
- Wheel Stud Included: Yes
- ComponentsSummaryRegular: Wheel Bearing And Hub Assembly
- WebNameRegular: Kugel Rear Wheel Bearing Hub Assembly 70-512331 For Dodge Caliber Avenger Chrysler Sebring
- Wheel Pilot Diameter: 67.00
- Bearing Type: Ball
- WebNameEbay2: [rear] Wheel Bearing Hub Assembly 70-512331 For Dodge Caliber Avenger Chrysler
- WebNameEbay3: Wheel Bearing Hub Assembly Rear 70-512331 For Dodge Caliber Avenger Chrysler
- Flange Diameter: 140.50
-
Features:
- Core made of High-Carbon AISI 52100 Chromium Alloy Steel features higher wear resistance, fatigue strength and steel hardness
- Premium quality MolyPro™ NLGI Grade 2 Molybdenum Grease (MoS2) to minimize wear and reduce friction providing longer lasting performance
- Exclusive multi-lip seals are made with ProSeal™ Nitrile Rubber (NBR) which can successfully function at high delta of temperatures while retaining its flexibility and sealing performance
- Inner rings are made of Case-Hardened Steel for improved resistance to surface wear and contact fatigue
- Thickness and metallurgy electronically validated for manufacturing consistency
- SAE J1714, J2525 and J2535 validated for OEM load-carrying capacity, durability, and performance characteristics
- Bearing already mounted and secured on the assembly to required OE torque specification for easier and faster installation
- Coated wheel studs resist corrosion and rust for easier removal and proper torquing
- Part Reference Numbers : WE60469 WH512331 123331 H512331 512331 BR930648 HA590221 TRB-512331
- Kugel is the definitive name in the world of Bearing and CV Axle manufacturing, renowned for its unwavering commitment to quality, innovation, and superior performance. With a rich legacy spanning decades, Kugel has solidified its position as a global leader in the industry. We understand that precision and reliability are paramount when it comes to wheel bearings and CV axle. Our cutting-edge manufacturing processes, coupled with state-of-the-art technology, ensure that every Kugel bearing and CV axle exceeds the highest industry standards. When you choose Kugel, you can expect unparalleled durability, exceptional quality, and unrivaled performance. Our bearings are meticulously tested to withstand the toughest conditions, providing longevity and peace of mind to our customers. Experience the pinnacle of bearing and CV axle excellence with Kugel – where quality meets performance, and reliability drives success. Trust Kugel to keep your wheels turning smoothly, every mile of the way.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
512331, BR930648, H512331, HA590221, WE60469
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Rear | Non-ABS |
- Rear Wheel Bearing Hub Assembly For Jeep Patriot Dodge Chrysler Compass 200
- Kugel Rear Wheel Bearing Hub Assembly 70-512332 For Jeep Patriot Dodge Chrysler Compass 200 Caliber Avenger Sebring
- Kugel
- Product Attributes:
- Flange Offset: 85
- WebNameEbay4: For Jeep Patriot Dodge Chrysler 200 Rear Wheel Bearing Hub Assembly 70-512332
- Anti Lock Braking System Type: Sensor
- ComponentsSummaryLongWithBrands: 1x Rear Kugel Wheel Bearing And Hub Assembly
- WebNamePlain: Kugel Rear Wheel Bearing Hub Assembly 70-512332
- ComponentsSummaryShortWithBrands: Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryLong: 1x Rear Wheel Bearing And Hub Assembly
- WebNameShort: Rear Wheel Bearing Hub Assembly 70-512332 For Jeep Patriot Dodge Chrysler Compass 200 Caliber
- Hub Pilot Diameter: 73.9
- WebNameEbay: Rear Wheel Bearing Hub Assembly For Jeep Patriot Dodge Chrysler Compass 200
- Wheel Stud Size: M12 X 1.5
- Bolt Circle Diameter: 114.3
- ComponentsSummaryRegularWithBrands: Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryShort: Wheel Bearing And Hub Assembly
- Wheel Stud Quantity: 5
- NumberOfPieces: 1
- Anti Lock Brake Sensor Included: No
- Brake Pilot Diameter: 80
- Anti Lock Braking System: Yes
- WebNameLong: Kugel Rear Wheel Bearing Hub Assembly 70-512332 For Jeep Patriot Dodge Chrysler Compass 200 Caliber Avenger Sebring
- Wheel Stud Included: Yes
- ComponentsSummaryRegular: Wheel Bearing And Hub Assembly
- WebNameRegular: Kugel Rear Wheel Bearing Hub Assembly 70-512332 For Jeep Patriot Dodge Chrysler Compass 200 Caliber Avenger Sebring
- Wheel Pilot Diameter: 67
- Bearing Type: Ball
- WebNameEbay2: [rear] Wheel Bearing Hub Assembly 70-512332 For Jeep Patriot Dodge Chrysler 200
- WebNameEbay3: Wheel Bearing Hub Assembly Rear 70-512332 For Jeep Patriot Dodge Chrysler 200
- Flange Diameter: 140.5
-
Features:
- Core made of High-Carbon AISI 52100 Chromium Alloy Steel features higher wear resistance, fatigue strength and steel hardness
- Premium quality MolyPro™ NLGI Grade 2 Molybdenum Grease (MoS2) to minimize wear and reduce friction providing longer lasting performance
- Exclusive multi-lip seals are made with ProSeal™ Nitrile Rubber (NBR) which can successfully function at high delta of temperatures while retaining its flexibility and sealing performance
- Inner rings are made of Case-Hardened Steel for improved resistance to surface wear and contact fatigue
- Thickness and metallurgy electronically validated for manufacturing consistency
- SAE J1714, J2525 and J2535 validated for OEM load-carrying capacity, durability, and performance characteristics
- Bearing already mounted and secured on the assembly to required OE torque specification for easier and faster installation
- Coated wheel studs resist corrosion and rust for easier removal and proper torquing
- Part Reference Numbers : WE60472 WH512332 123332 H512332 512332 BR930609 HA590216 TRB-512332
- Kugel is the definitive name in the world of Bearing and CV Axle manufacturing, renowned for its unwavering commitment to quality, innovation, and superior performance. With a rich legacy spanning decades, Kugel has solidified its position as a global leader in the industry. We understand that precision and reliability are paramount when it comes to wheel bearings and CV axle. Our cutting-edge manufacturing processes, coupled with state-of-the-art technology, ensure that every Kugel bearing and CV axle exceeds the highest industry standards. When you choose Kugel, you can expect unparalleled durability, exceptional quality, and unrivaled performance. Our bearings are meticulously tested to withstand the toughest conditions, providing longevity and peace of mind to our customers. Experience the pinnacle of bearing and CV axle excellence with Kugel – where quality meets performance, and reliability drives success. Trust Kugel to keep your wheels turning smoothly, every mile of the way.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
512332, BR930609, H512332, HA590216, WE60472
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Rear | 4-Wheel ABS |
- Rear Wheel Bearing Hub Assembly Pair For Dodge Caliber Avenger Chrysler Sebring
- Kugel Rear Wheel Bearing And Hub Assembly Pair For Dodge Caliber Avenger Chrysler Sebring - Left Right Side (Driver Passenger) K70-100666
- Kugel
- Product Attributes:
- WebNameEbay4: For Dodge Caliber Avenger Chrysler Sebring Rear Wheel Bearing Hub Assembly Pair
- ComponentsSummaryRegularWithBrands: 2x Kugel Wheel Bearing And Hub Assembly
- ComponentsSummaryShort: 2x Bearing Hub Assembly
- ComponentsSummaryLongWithBrands: 2x Rear Kugel Wheel Bearing And Hub Assembly (both Side)
- WebNamePlain: Kugel Rear Wheel Bearing And Hub Assembly Pair K70-100666
- ComponentsSummaryShortWithBrands: 2x Kugel Bearing Hub Assembly
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Rear Wheel Bearing And Hub Assembly (both Side)
- WebNameLong: Kugel Rear Wheel Bearing And Hub Assembly Pair For Dodge Caliber Avenger Chrysler Sebring - Left Right Side (driver Passenger) K70-100666
- WebNameShort: Rear Wheel Bearing And Hub Assembly Pair For Dodge Caliber Avenger Chrysler Sebring K70-100666
- ComponentsSummaryRegular: 2x Wheel Bearing And Hub Assembly
- WebNameRegular: Kugel Rear Wheel Bearing And Hub Assembly Pair For Dodge Caliber Avenger Chrysler Sebring - Left Right Side (driver Passenger) K70-100666
- WebNameEbay2: [rear] Wheel Bearing And Hub Assembly Pair For Dodge Caliber Avenger Chrysler
- WebNameEbay3: Wheel Bearing Hub Assembly Rear Pair For Dodge Caliber Avenger Chrysler Sebring
- WebNameEbay: Rear Wheel Bearing Hub Assembly Pair For Dodge Caliber Avenger Chrysler Sebring
-
Features:
- Core made of High-Carbon AISI 52100 Chromium Alloy Steel features higher wear resistance, fatigue strength and steel hardness
- Premium quality MolyPro™ NLGI Grade 2 Molybdenum Grease (MoS2) to minimize wear and reduce friction providing longer lasting performance
- Exclusive multi-lip seals are made with ProSeal™ Nitrile Rubber (NBR) which can successfully function at high delta of temperatures while retaining its flexibility and sealing performance
- Inner rings are made of Case-Hardened Steel for improved resistance to surface wear and contact fatigue
- Thickness and metallurgy electronically validated for manufacturing consistency
- SAE J1714, J2525 and J2535 validated for OEM load-carrying capacity, durability, and performance characteristics
- Bearing already mounted and secured on the assembly to required OE torque specification for easier and faster installation
- Coated wheel studs resist corrosion and rust for easier removal and proper torquing
- Kit Includes: 2x Rear Wheel Bearing and Hub Assembly (Both Side)
- Part Reference Numbers : WE60469 WH512331 123331 H512331 512331 BR930648 HA590221 TRB-512331
- Kugel is the definitive name in the world of Bearing and CV Axle manufacturing, renowned for its unwavering commitment to quality, innovation, and superior performance. With a rich legacy spanning decades, Kugel has solidified its position as a global leader in the industry. We understand that precision and reliability are paramount when it comes to wheel bearings and CV axle. Our cutting-edge manufacturing processes, coupled with state-of-the-art technology, ensure that every Kugel bearing and CV axle exceeds the highest industry standards. When you choose Kugel, you can expect unparalleled durability, exceptional quality, and unrivaled performance. Our bearings are meticulously tested to withstand the toughest conditions, providing longevity and peace of mind to our customers. Experience the pinnacle of bearing and CV axle excellence with Kugel – where quality meets performance, and reliability drives success. Trust Kugel to keep your wheels turning smoothly, every mile of the way.
This Part Fits the Following OEM/Substitute Numbers:
512331, BR930648, H512331, HA590221, TRB-512331
Additional Fitment Information:
| Vehicle | Position | BrakeABS |
|---|---|---|
| 2007 - Chrysler Sebring | Rear | Non-ABS |
Showing 1 - 10 of 140 products
Loading...