2019 Ford Expedition Driveline and Axles Parts
Choose your Part Name for your 2019 Ford Expedition
4WD Actuator
Differential
Differential Carrier Bearing
Differential Carrier Bearing Race
Differential Cover
Differential Lock Motor
Differential Pinion Bearing
Differential Pinion Bearing Spacer
Differential Pinion Race
Differential Pinion Seal
Drive Axle Shaft Bearing
Drive Axle Shaft Bearing Seal
Drive Axle Shaft Seal
Universal Joint
Wheel Bearing Dust Cap
Wheel Bearing and Hub Assembly
Image
Product
Price
- Hub Assembly
- MOOG 515176 Hub Assembly
-
Features:
- Innovative roll form design ensures consistent and optimal preload.
- MOOG Abrasion-Resistant ABS Cord: Manufactured from a blended material that provides superior ABS protection, increases abrasion resistance and protects against adverse conditions.
- Wheel Stud Bolts: Wheel studs feature a protective coating that helps prevent rust and corrosion, allowing easier removal and proper torquing of the wheel nut.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
JL1Z1104D
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2019 - Ford Expedition | Front | RWD |
- Universal Joint Greaseable 1350 Series
- with 1350 Series Driveline with 2 Piece Rear Driveshaft 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear Driveshaft at Support Bearing |
- Universal Joint Greaseable 1350 Series
- with 1 Piece Rear Driveshaft with 1350 Series Driveline 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear Driveshaft at Transmission |
- Universal Joint Greaseable 1350 Series
- with 1 Piece Rear Driveshaft with 1350 Series Driveline 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear Driveshaft at Rear Axle |
- Universal Joint Greaseable 1350 Series
- with 1350 Series Driveline with 2 Piece Rear Driveshaft 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear Driveshaft at Transmission |
- Universal Joint Greaseable 1350 Series
- with 1350 Series Driveline with 2 Piece Rear Driveshaft 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear Driveshaft at Rear Axle |
- 34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.
- Detroit Truetrac® Differential; 34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.;
- Detroit Truetrac® Differential
-
Features:
- Helical Gear Limited Slip Differential
- Optimized Torque Bias Ratios Deliver Max Acceleration And Handling
- Automatic Engagement
- Works In Forward And Reverse
- Ideal For Most Vehicles
- Durable
- Smooth
- Quiet Operation
- No Special Lubrication Or Friction Modifiers Needed
- The Detroit Truetrac is a helical-gear style, limited-slip differential that maximizes wheel traction and enhances driving characteristics. Maintenance-free, it features smooth, automatic operation in forward and reverse. Its versatility makes Detroit Truetrac the ideal traction solution for almost any type of vehicle.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Front
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Bearing Only, Serviced w/Differential Carrier Bearing Race
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Ford Expedition | Front |
Showing 1 - 10 of 30 products
Loading...