1984 Chevrolet C15 Engine Parts
Choose your Part Name for your 1984 Chevrolet C15
Image
Product
Price
- High Performance Oil Pump Screen
- Use with 8in Deep Oil Pan Bolt On Screen, May Require M-55085 Mounting Kit Screen Has 3/16 Inch To 1/4 Inch Up Or Down Adjustment
- High Performance Oil Pump Screen
- Performance
- Product Attributes:
- Tube Material: Galvanized Steel
- Gasket Or Seal Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: No
- Flanged End: Yes
- Tube Length:
- 121.00
- 4.750
- Flange Mount Hole Quantity: 2
- Tube Inside Diameter:
- 0.750
- 19.00
- Pickup Screen Maximum Adjustment:
- 0.250
- 6.00
- Tube Shape: Straight
- Screen Material: Galvanized Steel
-
Features:
- Manufactured from high quality durable materials for long wear
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
- Precision engineering protects the engine from dirt and contaminants
- Made in USA. A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.
This Part Fits the Following OEM/Substitute Numbers:
12559
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Chevrolet C15 |
- SB Chevy
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish:
- Black Crinkle
- Powder Coated
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: New In 2009!
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: 4 Inch
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Raised/milled Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: Matte
- Valve Cover Type: Tall
- These innovative valve covers have an aggressive design that will make your engine stand out at the show. These premium die-cast aluminum valve covers offer more internal clearance than most other valve covers because our innovative mold designs are at the forefront of modern die-casting technology. These valve covers are available in 10 different styles, which include raised, recessed, and no emblems at all. All valve covers with baffles include grommets. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
- SB Chevy
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish:
- Chevy Orange
- Painted
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: Valve Covers Feature Raised And Milled Aluminum Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: 4 Inch
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Raised/milled Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: Semi-gloss
- Valve Cover Type: Tall
- These innovative valve covers have an aggressive design that will make your engine stand out at the show. These premium die-cast aluminum valve covers offer more internal clearance than most other valve covers because our innovative mold designs are at the forefront of modern die-casting technology. All valve covers with baffles include grommets. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
- 4 Pcs
- Chrome with Red Bowtie Logo SB Chevy
- Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Emblem Style: Recessed Red & Black Emblem
- Material: Steel
- Finish: Chrome
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Chevrolet C15 |
- 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Emblem Style: Recessed Red & Black Emblem
- Material: Steel
- Finish: Chrome
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Chevrolet C15 |
- Fits SB Chevy
- Sold as Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: The Latest Look For Chevrolet Small-block V8, 1958-1986.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Technical Note: Chev Sm-blk Valve Covers & Valve Cover W/baffle Will Not Clear Most Stud Girdles
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 3.375
- 87
- Sheen Level: High Gloss
- Valve Cover Type: Tall
- The Latest Look for Chevrolet Small-block V8, 1958-1986. These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy small-block or S/B refers to 1958-1986 engines, unless otherwise specified.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
- Fits SB Chevy
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: The Latest Look For Chevrolet Small-block V8, 1958-1986.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Chev Sm-blk Valve Covers & Valve Cover W/baffle Will Not Clear Most Stud Girdles
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.375
- 61
- Sheen Level: High Gloss
- Valve Cover Type: Short
- The Latest Look for Chevrolet Small-block V8, 1958-1986. These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy small-block or S/B refers to 1958-1986 engines, unless otherwise specified.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
- Fits SB Chevy
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish:
- Black Crinkle
- Powder Coated
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Red Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 3.375
- 87
- Sheen Level: Matte
- Valve Cover Type: Tall
- These engine valve covers are manufactured from high quality stamped steel material. They are a tall style valve cover and include oil breather baffles. They have a great looking chrome plated finish with the Chevrolet and Bowtie logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This is an officially licensed GM Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
- SB Chevy
- Engine Valve Cover
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Polished
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Black Inchchevrolet Inch And Red Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 3.375
- 87
- Sheen Level: Semi-gloss
- Valve Cover Type: Tall
- These engine valve covers are manufactured from high quality die cast aluminum material. They are a tall style valve cover with oil breather baffles. They have a great looking polished finish with "Chevrolet" and "Bowtie" logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This is an officially licensed GM Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
- Fits SB Chevy
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1958 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Embossed Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.375
- 61
- Sheen Level: High Gloss
- Valve Cover Type: Short
- These engine valve covers are manufactured from high quality stamped steel material. They are a short style valve cover and feature oil breather baffles. The valve covers have a great looking and long lasting chrome plated finish that also includes the "Chevrolet" and "Bowtie" logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This an officially licensed GM Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Chevrolet C15 | V | - | OHV | 16 | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 21 products
Loading...