1984 Oldsmobile Delta 88 Engine Parts
Choose your Part Name for your 1984 Oldsmobile Delta 88
Image
Product
Price
- FRAM, PH3506, Oil Filter
- Spin-on Oil Filter Alternate filter for PH3675
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 4.010
- Non Slip Grip: Yes
- Gasket Thickness: 0.480
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Marine Approved: No
- Outside Diameter: 3.984
- Gasket Outside Diameter: 4.664
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
12187, 1931018, ABP/N10G-LF3000, LF438, LF515, LFP2258
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | 8 Cyl 5.7L | 350 |
- Engine Mount
- OEM Replacement
This Part Fits the Following OEM/Substitute Numbers:
22501573, 22521746, 22521749, 2328, 406436, 410570, 410814, 410815, 410817, 417137, 551078, 551112, 553915, 553948, 556633, 602328, A2328, EM-2328...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | Front Left | 8 Cyl 5.0L | 307 |
- Engine Mount
- OEM Replacement
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | Front Right | 8 Cyl 5.0L | 307 |
- CONNECTING ROD BEARING SET For CHEVROLET SBC 307CI 350CI & GEN III/IV
- CONNECTING ROD BEARING SET For CHEVROLET SBC 307CI 350CI & GEN III/IV; alecular (racing line)
- Optional to CR 807SI (Race bearings, Bimetal [Alecular])
- Product Attributes:
- Undersize: 010
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Oldsmobile Delta 88 |
- Oil Filter
- H-3.125 in.; OD-3 in.; M18 x 1.5 Thread; w/o PSI Relief Valve Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M18 X 1.5
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: No
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.125 In. (79mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
51040, 57032, FL321, HP9, L10111, L10112, M1101, M1101A, M1206A, MO111, PF1225, PF2186, PF40, PF47, PF47E, PH3387A, PH3614, PH9837...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | 3800 | 6 Cyl 3.8L | 231 |
- Oil Filter
- H-4.781 in.; OD-3 in.; 13/16 In. - 16 Thread; w/o psi Relief Valve Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: 0.8125 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Canister
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.750 In. (146mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: No
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 4.781 In. (121mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
51045, 51522, DG3675, FL331, L20123, L25288, M1206, M1206A, PF45, PF58, PF61E, PH3429, PH3506, PH3675, PH9837, PS2006, SS2006, TG3506...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | 8 Cyl 5.0L | 307 |
- Stock Replacement Push Rod
- Use With JB-2104 Roller Lifters
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Diameter:
- 0.312
- 8.0
- Drilled: Yes
- Length:
- 196.0
- 7.701
- Top Tip Diameter:
- 0.375
- 10.0
- Title: Engine Push Rod
- Top Tip Type: Ball End
- Bottom Tip Diameter:
- 0.375
- 10.0
- Bottom Tip Type: Ball End
- Diameter:
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | Engine VIN | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | OHV | DIESEL | 8 Cyl 5.7L | N | Oldsmobile | 350 |
- Stock Replacement Push Rod
- Use With JB-2104 Roller Lifters
- Stock Replacement Push Rod
- Stock
- Product Attributes:
- Diameter:
- 0.312
- 7.92
- 8.0
- Drilled: Yes
- Length:
- 195.60
- 196.0
- 7.701
- Top Tip Diameter:
- 0.375
- 10.0
- 9.53
- Title: Engine Push Rod
- Top Tip Type: Ball End
- Bottom Tip Diameter:
- 0.375
- 10.0
- 9.53
- Bottom Tip Type: Ball End
- Diameter:
- Made In USA. Melling offers a broad selection of push rods for both standard and performance engine applications. Melling push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. Melling recommends always installing new push rods to assure proper valve train geometry and performance. In addition to OEM push rod applications, Melling select offers chrome molly push rods for high performance applications.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
190-1489, 215-4218, 22533631, 48195, MPR-365, PR-1489, PR-3244, PR-365, RP-3244, RP302
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | Engine VIN | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | OHV | DIESEL | 8 Cyl 5.7L | N | Oldsmobile | 350 |
- Buick Stage I/Stage II V6 Cylinder Head Gasket
- 0.0430 in. Copper; 3.86 in. Bore
- Buick Stage I/Stage II V6 .043in. Copper Cylinder Head Gasket; 3.860in. Bore
- Cylinder Head Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
- Engine Make/Size: Buick 192/231/252ci
-
Features:
- Cylinder Head Gasket
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
- Copper Head Gasket
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | 3800 | 6 Cyl 3.8L | 231 |
- Oil Pan Gasket Set
- Cork
- FEL-PRO OS 13419 C Oil Pan Gasket Set
- Product Attributes:
- Part Material: Blue Stripe Cork-rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
16314, 22519181, 2605, 384472, 7424930, CS 2562CE, OS30534, OS5250, OS554, RA1206
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Oldsmobile Delta 88 | V | - | 8 Cyl 5.0L | 307 |
Showing 1 - 10 of 25 products
Loading...