2019 Chevrolet Corvette Engine Parts
Choose your Part Name for your 2019 Chevrolet Corvette
Engine Camshaft Seal
Engine Crankshaft Seal
Engine Cylinder Head Dowel Pin
Engine Cylinder Head Gasket
Engine Cylinder Head Gasket Set
Engine Intake Manifold
Engine Intake Manifold Gasket
Engine Oil Dipstick Tube Seal
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filler Cap
Engine Oil Filter
Engine Oil Filter Adapter
Engine Oil Filter Remote Mounting Kit
Engine Oil Pressure Switch
Engine Timing Chain Guide
Engine Timing Chain Tensioner
Engine Valve Cover Gasket
Engine Valve Cover Hold Down Tab
Engine Valve Lifter
Engine Valve Stem Oil Seal Set
Engine Variable Valve Timing (VVT) Solenoid
Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- Engine Valve Cover Holdown Clamps; Chrome with Red Bowtie Logo; SB Chevy; 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Engine Valve Cover Holdown Clamps; Chrome Plated Finish With Red Bowtie Logo; Fits 1955-1986 262-400 Small Block Chevy V8 and V6 Engines; Made From High-Quality Steel; Officially Licensed GM Performance Product; Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Part Type: Valve Cover Holdown Clamps
- Emblem Style: Recessed Red & Black Emblem
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Chevrolet Corvette |
- High Flow Premium Media; H-3.75 in.; OD-3 in.; psi Relief Valve 22-28
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- Spin-on Oil Filter Bypass; 2-1/2 in. ID; 2 3/4 in. OD Flange with 22mm X 1.5
- Spin-on Style Oil Filter Bypass Adapter; 2-1/2 in. I.D. and 2 3/4 in. O.D. Flange with 22mm X 1.5 Threads
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm. For More Info Visit Www.p65warnings.ca.gov
- Mount Material: Cast Aluminum
- IMPORTANT!: Not For Diesel, Marine Or Race Use! See Hamburger's Billet Filtration Components
- Package Contents: Adapter And Nipple
- Filter Bypass Style: Standard Port Filter Bypass
- VEHICLE Oil Filter Flange OD: 2-3/4 In.
- Filter Nipple Thread Size: 22mm X 1.5
- Bypass Mounting Style: Spin-on
- Contents: Adapter And Nipple
- Installation Notes: This Spin-on Oil Filter Bypass Adapter Is Easy To Install. Simply Remove The Stock Filter, And Replace It With The Bypass Adapter.
- Product Details: Fits Engine Blocks Designed To Accept Oil Filters With A 22mm X 1.5 Thread And 2-5/8 In. Diameter O-ring.
- Notes: Spin-on Style Oil Filter Bypass Adapter; 2-1/2 In. I.d. And 2 3/4 In. O.d. Flange W/ 22mm X 1.5 Threads
- VEHICLE Oil Filter Flange ID: 2-1/2 In.
- Fitting Thread: 1/2 In. Npt
- Materials: Cast Aluminum
- Port Size: 1/2 In. Npt
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | United States | 8 Cyl 6.2L | 376 |
- Engine Valve Lifter
- Hydraulic Roller Lifters Active Fuel Management Engine ; Riveted Retaining Pin For Int. & Exh. on Cyl. 2-3-5-8 Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Sealed Power HT-2148A Lifter (Pack of 4)
- Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12499225, 12564012, 12576400, 12648846, 17089852, 17109057, 17120090, 17120735, 17121905, 17122490, 213-1738, 2131738, 36-2148, 5233745, 5234660, 5234670, 5234890, 5235498...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- 103mm Throttle Body Bore; Polymer; Black w/Red Logos;CARB E.O. D-722-3 CARB E.O. D-722-3
- Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Red Logos;
- Atomic Airforce Intake Manifold
- Product Attributes:
- Number of Carbs: None; For Fuel Injection
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- Cylinder Head Type: Standard
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Chevy Lt1
- RPM Range: Oem
- Emission: N/a
- RPM: Oem
-
Features:
- Dyno Proven Bolt On Power
- Runner Layout And Plenum Design Promotes Max Airflow
- 2 Piece Design Easy Access To Runners
- Glass Reinforced Composite Resists Heat Soak
- Accepts OEM and Aftermarket Throttle Bodies
- Equipped w/Port Injector Bosses
- When you're serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | Upper | 8 Cyl 6.2L | 376 |
- 103mm Throttle Body Bore; Polymer; Black w/Red Logos;CARB E.O. D-722-3 CARB E.O. D-722-3
- Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Red Logos;
- Atomic Airforce Intake Manifold
- Product Attributes:
- Number of Carbs: None; For Fuel Injection
- Usage: Street/strip
- WARNING CA Proposition 65: Yes
- Cylinder Head Type: Standard
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Chevy Lt1
- RPM Range: Oem
- Emission: N/a
- RPM: Oem
-
Features:
- Dyno Proven Bolt On Power
- Runner Layout And Plenum Design Promotes Max Airflow
- 2 Piece Design Easy Access To Runners
- Glass Reinforced Composite Resists Heat Soak
- Accepts OEM and Aftermarket Throttle Bodies
- Equipped w/Port Injector Bosses
- When you're serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | Upper | 8 Cyl 6.2L | 376 |
- Single Remote Oil Filter System; 2-1/2 in. ID; 2-3/4 in. OD Flange; 22mmX1.5
- Single Oil Filter Relocation System; 2-1/2 in. I.D. and 2-3/4 in. O.D. Bypass Flange with 22mmX1.5 Threads
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm. For More Info Visit Www.p65warnings.ca.gov
- Mount Material: Cast Aluminum
- Hose ID: 1/2 In.
- IMPORTANT!: Not For Diesel, Marine Or Race Use! See Hamburger's Billet Filtration Components
- Kit Type: Single Filter Kits
- Performance: Yes
- Hose Length: 30 In.
- Hose Thickness: 0.125 In.
- VEHICLE Oil Filter Flange OD: 2-3/4 In.
- Fitting Finish: Raw
- Contents: Oil Filter Bypass Adapter, Remote Single Oil Filter Base, 2- 30 In. Hoses, 4 Brass Fittings, Mounting Hardware & Instructions
- Notes: Single Oil Filter Relocation System; 2-1/2 In. I.d. And 2-3/4 In. O.d. Bypass Flange W/ 22mmx1.5 Threads
- Single or Dual Filter: Single
- Hose Bust Pressure: 1200 Psi
- Hose Temperature Range: -40 F To +212 F
- Fitting Type: Hose Barb
- Remote Base Filter Size: Ph8a (or Equivalent)
- Hose Connection Type: Push Lock
- Port Size: 1/2 In. Npt
- O.E. Replacement: No
- Port Style: Vertical
- Oil Filter Compatibility: Fram Ph8a, Trans-dapt 1156 Or Equivalent
- Race Only: No
- Fitting Quantity: 4
- Package Contents: Oil Filter Bypass Adapter, Remote Oil Filter Base, 2 Hoses, 4 Fittings, 4 Hose Ferrules Mounting Hardware
- Bolt Hole Quantity: 3
- Filter Bypass Style: Standard Port Filter Bypass
- Hose Material: Flame Resistant Nitrile/rubber
- Hose Type: Reinforced 1 Fiber Band
- Filter Nipple Thread Size: 22mm X 1.5
- Product Details: Fits Engine Blocks Designed To Accept Oil Filters With A 22mmx1.5 Thread And 2-5/8 In. Diameter Sealing O-ring.
- VEHICLE Oil Filter Flange ID: 2-1/2 In.
- Fitting Thread: 1/2 In. Npt
- Fitting Material: Brass
- Hose OD: 3/4 In.
- Materials: Cast Aluminum
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | United States | 8 Cyl 6.2L | 376 |
- Valve Stem Seal Set
- Premium valve stem seals incl.
- FEL-PRO SS 71039 Valve Stem Seal Set
- Product Attributes:
- Part Design or Feature or Use: Top-hat Design Seal
- Part Material: Premium High-temperature Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
10528, B45920, SS2206
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | Intake and Exhaust | 8 Cyl 6.2L | 376 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
12583570, 12593353, 12621520, 12631205, 12642163, 12642516, 12650077, 12662195, 14152, 1692078J00, 8152, FC220, FC232, FC243, MO152, NI, P8152
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Z06 | 376 |
Showing 1 - 10 of 39 products
Loading...