2020 Chevrolet Camaro Engine Parts
Choose your Part Name for your 2020 Chevrolet Camaro
Engine Camshaft Seal
Engine Crankshaft Seal
Engine Cylinder Head Dowel Pin
Engine Cylinder Head Gasket
Engine Cylinder Head Gasket Set
Engine Harmonic Balancer Bolt
Engine Intake Manifold Gasket
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filter
Engine Oil Filter Adapter
Engine Oil Filter Remote Mounting Kit
Engine Oil Pan
Engine Oil Pressure Switch
Engine Rocker Arm
Engine Valve Cover Gasket
Engine Valve Cover Hold Down Tab
Engine Valve Stem Oil Seal
Engine Valve Stem Oil Seal Set
Engine Variable Valve Timing (VVT) Solenoid
Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | ZL1 | 376 |
- Engine Valve Cover Holdown Clamps; Chrome with Red Bowtie Logo; SB Chevy; 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Engine Valve Cover Holdown Clamps; Chrome Plated Finish With Red Bowtie Logo; Fits 1955-1986 262-400 Small Block Chevy V8 and V6 Engines; Made From High-Quality Steel; Officially Licensed GM Performance Product; Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Part Type: Valve Cover Holdown Clamps
- Emblem Style: Recessed Red & Black Emblem
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Chevrolet Camaro |
- High Flow Premium Media; H-3.75 in.; OD-3 in.; psi Relief Valve 22-28
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | V | 6162 | 8 Cyl 6.2L | LT1 | 376 |
- Spin-on Oil Filter Bypass; 2-1/2 in. ID; 2 3/4 in. OD Flange with 22mm X 1.5
- Spin-on Style Oil Filter Bypass Adapter; 2-1/2 in. I.D. and 2 3/4 in. O.D. Flange with 22mm X 1.5 Threads
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm. For More Info Visit Www.p65warnings.ca.gov
- Mount Material: Cast Aluminum
- IMPORTANT!: Not For Diesel, Marine Or Race Use! See Hamburger's Billet Filtration Components
- Package Contents: Adapter And Nipple
- Filter Bypass Style: Standard Port Filter Bypass
- VEHICLE Oil Filter Flange OD: 2-3/4 In.
- Filter Nipple Thread Size: 22mm X 1.5
- Bypass Mounting Style: Spin-on
- Contents: Adapter And Nipple
- Installation Notes: This Spin-on Oil Filter Bypass Adapter Is Easy To Install. Simply Remove The Stock Filter, And Replace It With The Bypass Adapter.
- Product Details: Fits Engine Blocks Designed To Accept Oil Filters With A 22mm X 1.5 Thread And 2-5/8 In. Diameter O-ring.
- Notes: Spin-on Style Oil Filter Bypass Adapter; 2-1/2 In. I.d. And 2 3/4 In. O.d. Flange W/ 22mm X 1.5 Threads
- VEHICLE Oil Filter Flange ID: 2-1/2 In.
- Fitting Thread: 1/2 In. Npt
- Materials: Cast Aluminum
- Port Size: 1/2 In. Npt
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | L | 1998 | United States | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 12696048 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 350
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Style: Spin-on Lube Filter
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | L | 1998 | Canada | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 12640445 Also Available In Master Pack Version Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 350
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Style: Spin-on Lube Filter
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
100290, 12640445, 12667194, 12670058, 12674698, 12696048, 2100290, 3100290, 4100290, 618-10290, 8-10290, C-79713, CAS12060, FF12060, FS12060, L11403, M1-113A, M9509...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | V | 6162 | Main | Mexico | 8 Cyl 6.2L | 376 |
- Single Remote Oil Filter System; 2-1/2 in. ID; 2-3/4 in. OD Flange; 22mmX1.5
- Single Oil Filter Relocation System; 2-1/2 in. I.D. and 2-3/4 in. O.D. Bypass Flange with 22mmX1.5 Threads
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm. For More Info Visit Www.p65warnings.ca.gov
- Mount Material: Cast Aluminum
- Hose ID: 1/2 In.
- IMPORTANT!: Not For Diesel, Marine Or Race Use! See Hamburger's Billet Filtration Components
- Kit Type: Single Filter Kits
- Performance: Yes
- Hose Length: 30 In.
- Hose Thickness: 0.125 In.
- VEHICLE Oil Filter Flange OD: 2-3/4 In.
- Fitting Finish: Raw
- Contents: Oil Filter Bypass Adapter, Remote Single Oil Filter Base, 2- 30 In. Hoses, 4 Brass Fittings, Mounting Hardware & Instructions
- Notes: Single Oil Filter Relocation System; 2-1/2 In. I.d. And 2-3/4 In. O.d. Bypass Flange W/ 22mmx1.5 Threads
- Single or Dual Filter: Single
- Hose Bust Pressure: 1200 Psi
- Hose Temperature Range: -40 F To +212 F
- Fitting Type: Hose Barb
- Remote Base Filter Size: Ph8a (or Equivalent)
- Hose Connection Type: Push Lock
- Port Size: 1/2 In. Npt
- O.E. Replacement: No
- Port Style: Vertical
- Oil Filter Compatibility: Fram Ph8a, Trans-dapt 1156 Or Equivalent
- Race Only: No
- Fitting Quantity: 4
- Package Contents: Oil Filter Bypass Adapter, Remote Oil Filter Base, 2 Hoses, 4 Fittings, 4 Hose Ferrules Mounting Hardware
- Bolt Hole Quantity: 3
- Filter Bypass Style: Standard Port Filter Bypass
- Hose Material: Flame Resistant Nitrile/rubber
- Hose Type: Reinforced 1 Fiber Band
- Filter Nipple Thread Size: 22mm X 1.5
- Product Details: Fits Engine Blocks Designed To Accept Oil Filters With A 22mmx1.5 Thread And 2-5/8 In. Diameter Sealing O-ring.
- VEHICLE Oil Filter Flange ID: 2-1/2 In.
- Fitting Thread: 1/2 In. Npt
- Fitting Material: Brass
- Hose OD: 3/4 In.
- Materials: Cast Aluminum
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | L | 1998 | United States | 4 Cyl 2.0L | 122 |
- Valve Stem Seal Set
- Premium valve stem seals incl.
- FEL-PRO SS 71039 Valve Stem Seal Set
- Product Attributes:
- Part Design or Feature or Use: Top-hat Design Seal
- Part Material: Premium High-temperature Rubber
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
10528, B45920, SS2206
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | V | 6162 | Intake and Exhaust | 8 Cyl 6.2L | 376 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 12696048 Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 350
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Style: Spin-on Lube Filter
- Media Material: Enhanced Cellulose
- Class: C
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | L | 1998 | Canada | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 12640445 Factory filled synthetic oil - WIX XP or WIX Premium Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 350
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Style: Spin-on Lube Filter
- Media Material: Enhanced Cellulose
- Class: C
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
100290MP, 2100290MP, 618-10290MP, PF64F, WL10290MP, WL610290BP
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2020 - Chevrolet Camaro | V | 6162 | Main | Mexico | 8 Cyl 6.2L | 376 |
Showing 1 - 10 of 52 products
Loading...