2020 GMC Sierra 1500 Engine Parts
Choose your Part Name for your 2020 GMC Sierra 1500
Engine Camshaft Seal
Engine Crankshaft Seal
Engine Cylinder Head Dowel Pin
Engine Cylinder Head Gasket
Engine Intake Manifold Gasket
Engine Oil Catch Can Kit
Engine Oil Dipstick Tube Seal
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filler Cap
Engine Oil Filter
Engine Oil Filter Adapter
Engine Oil Filter Remote Mounting Kit
Engine Oil Pressure Switch
Engine Oil Separator
Engine Rear Main Seal Cover
Engine Valve Cover Gasket
Image
Product
Price
- Oil Filter
- H-4.78 in.; OD-3.01 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.750 In. (146mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.130 In. (79 Mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 4.781 In. (121mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
19330000, 19330001, 5184231AA, 57045, 57502, 7045, 7502, 84045, 84502, AA5Z6714A, AA5Z6714AA, AA5Z6714AB, B7444, B7449, FL500, FL500S, L22500, LF637...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | - | 6 Cyl 4.3L | 262 |
- Spin-on Oil Filter Bypass; 2-1/2 in. ID; 2 3/4 in. OD Flange with 22mm X 1.5
- Spin-on Style Oil Filter Bypass Adapter; 2-1/2 in. I.D. and 2 3/4 in. O.D. Flange with 22mm X 1.5 Threads
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm. For More Info Visit Www.p65warnings.ca.gov
- Mount Material: Cast Aluminum
- IMPORTANT!: Not For Diesel, Marine Or Race Use! See Hamburger's Billet Filtration Components
- Package Contents: Adapter And Nipple
- Filter Bypass Style: Standard Port Filter Bypass
- VEHICLE Oil Filter Flange OD: 2-3/4 In.
- Filter Nipple Thread Size: 22mm X 1.5
- Bypass Mounting Style: Spin-on
- Contents: Adapter And Nipple
- Installation Notes: This Spin-on Oil Filter Bypass Adapter Is Easy To Install. Simply Remove The Stock Filter, And Replace It With The Bypass Adapter.
- Product Details: Fits Engine Blocks Designed To Accept Oil Filters With A 22mm X 1.5 Thread And 2-5/8 In. Diameter O-ring.
- Notes: Spin-on Style Oil Filter Bypass Adapter; 2-1/2 In. I.d. And 2 3/4 In. O.d. Flange W/ 22mm X 1.5 Threads
- VEHICLE Oil Filter Flange ID: 2-1/2 In.
- Fitting Thread: 1/2 In. Npt
- Materials: Cast Aluminum
- Material: Cast Aluminum
- VEHICLE Oil Filter Nipple Size: 22mm X 1.5
- Port Size: 1/2 In. Npt
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | 5328 | United States | 8 Cyl 5.3L | 325 |
- Single Remote Oil Filter System; 2-1/2 in. ID; 2-3/4 in. OD Flange; 22mmX1.5
- Single Oil Filter Relocation System; 2-1/2 in. I.D. and 2-3/4 in. O.D. Bypass Flange with 22mmX1.5 Threads
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm. For More Info Visit Www.p65warnings.ca.gov
- Mount Material: Cast Aluminum
- Hose ID: 1/2 In.
- IMPORTANT!: Not For Diesel, Marine Or Race Use! See Hamburger's Billet Filtration Components
- Kit Type: Single Filter Kits
- Performance: Yes
- Hose Length: 30 In.
- Hose Thickness: 0.125 In.
- VEHICLE Oil Filter Flange OD: 2-3/4 In.
- Fitting Finish: Raw
- Contents: Oil Filter Bypass Adapter, Remote Single Oil Filter Base, 2- 30 In. Hoses, 4 Brass Fittings, Mounting Hardware & Instructions
- Notes: Single Oil Filter Relocation System; 2-1/2 In. I.d. And 2-3/4 In. O.d. Bypass Flange W/ 22mmx1.5 Threads
- Single or Dual Filter: Single
- Hose Bust Pressure: 1200 Psi
- Hose Temperature Range: -40 F To +212 F
- Fitting Type: Hose Barb
- Remote Base Filter Size: Ph8a (or Equivalent)
- Hose Connection Type: Push Lock
- Material: Cast Aluminum
- Port Size: 1/2 In. Npt
- O.E. Replacement: No
- Port Style: Vertical
- Oil Filter Compatibility: Fram Ph8a, Trans-dapt 1156 Or Equivalent
- Race Only: No
- Fitting Quantity: 4
- Package Contents: Oil Filter Bypass Adapter, Remote Oil Filter Base, 2 Hoses, 4 Fittings, 4 Hose Ferrules Mounting Hardware
- Bolt Hole Quantity: 3
- Filter Bypass Style: Standard Port Filter Bypass
- Hose Material: Flame Resistant Nitrile/rubber
- Hose Type: Reinforced 1 Fiber Band
- Filter Nipple Thread Size: 22mm X 1.5
- Product Details: Fits Engine Blocks Designed To Accept Oil Filters With A 22mmx1.5 Thread And 2-5/8 In. Diameter Sealing O-ring.
- VEHICLE Oil Filter Flange ID: 2-1/2 In.
- Fitting Thread: 1/2 In. Npt
- Fitting Material: Brass
- Hose OD: 3/4 In.
- Materials: Cast Aluminum
- VEHICLE Oil Filter Nipple Size: 22mm X 1.5
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | 5328 | United States | 8 Cyl 5.3L | 325 |
- Baffled Oil Catch Can Kit, Fits Chevrolet/GMC 1500 5.3L/6.2L 2019+
- Baffled Oil Catch Can Kit, Fits Chevrolet/GMC 1500 5.3L/6.2L 2019+
- Product Attributes:
- SellingPoint04: Prevents Blow-by From Contaminating Intake Mixture And Causing Knock
- SellingPoint05: Internal Air Diverter, Baffle, And 50 Micron Bronze Filter Maximize Oil Separation
- SellingPoint06: Catch Can Captures Blow-by, Preventing It From Fouling The Engine Oil
- SellingPoint07: Direct-fit Bracket Mounts The Catch Can Away From Engine Vibration
- SellingPoint01: Direct Fit For 2019+ Chevrolet/gmc 1500 With 5.3l/6.2l V8
- SellingPoint02: Installs In Under An Hour
- SellingPoint03: Protects Intake Valves From Power-robbing Carbon Buildup
- TechSpec Chassis Codes: T1
- SellingPoint08: Sturdy 3mm-thick Steel Brackets Withstand Rough Roads And Off-road Abuse
- SellingPoint09: Pre-installed Quick-disconnect Fittings For Clean Installation
- TechSpec Drain Plug Thread Size: 3/8-npt
- TechSpec Outlet: M16x1.5
- TechSpec Catch Can Diameter (in): N/a
- SellingPoint10: Filter And Can Are Fully Serviceable
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: 5.3l L83--6.2l L87
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications:
- 2019+ Chevy Silverado 1500 5.3l/6.2l
- 2019-2023 Chevy Silverado 1500 5.3l/6.2l--2019-2023 Chevy Suburban 5.3l/6.2l--2019-2023 Chevy Tahoe 5.3l/6.2l--2019-2023 Gmc Sierra 1500 5.3l/6.2l--2019-2023 Gmc Yukon 5.3l/6.2l
- TechSpec Includes: (1) Direct-fit Mounting Bracket--(1) 3 Fl. Oz. Black, Anodized 6061-aluminum Catch Can--(2) Cnc-machined Aluminum Barbed Fittings--(2) Hoses W/ Pre-installed Quick-disconnect Fittings--(2) Worm Gear Clamps--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Inlet: M16x1.5
-
Features:
- Direct fit for 2019+ Chevrolet/GMC 1500 with 5.3L/6.2L V8
- Installs in under an hour
- Protects intake valves from power-robbing carbon buildup
- Prevents blow-by from contaminating intake mixture and causing knock
- Internal air diverter, baffle, and 50 micron bronze filter maximize oil separation
- Catch can captures blow-by, preventing it from fouling the engine oil
- Direct-fit bracket mounts the catch can away from engine vibration
- Sturdy 3mm-thick steel brackets withstand rough roads and off-road abuse
- Pre-installed quick-disconnect fittings for clean installation
- Filter and can are fully serviceable
- Mishimoto Lifetime Warranty
- The T1 Chevrolet Silverado is offered with both 5.3L and 6.2L LS engines. These engines feature direct injection, which is great for creating an efficient burn and saving fuel but allows for carbon buildup on the intake valves. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. The best way to treat carbon buildup is to prevent it, and that's where this Mishimoto Chevrolet/GMC T1 direct-fit catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. The Mishimoto Chevrolet/GMC T1 catch can kit is a complete bolt-on blow-by solution and includes all necessary components for a hassle-free installation. As with all our products, this kit includes our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- Rubber Drain Plug Gasket, Fits M12 (20Mm Od)
- Rubber Gasket Package Quantity: 10 Dorman - AutoGrade - Boxed Packaging Type: Box Package Contents: 10 Rubber Gaskets
- Product Attributes:
- Inside Diameter: 0.44
- Package Contents: 10 Rubber Gaskets
- Outside Diameter: 0.81
- Contenidos del paquete: 10 Juntas De Caucho
- Thickness: 2.59
-
Features:
- Direct replacement - these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality - built to restore a proper seal
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
This Part Fits the Following OEM/Substitute Numbers:
11969pk, 12616850, 14079550, 14090908, 1625762, 1631748, 21007240, 24571185, 25524544, 263-874, 323429, 3536966, 5741252, 8035369660, 8140909080, ODP-65327B, ODP-66451B
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- Plastic Oil Drain Plug
- Package Quantity: 1 Dorman - AutoGrade - Oil-Tite! Packaging Type: Clamshell
- Product Attributes:
- SAE or Metric: Sae
- Package Contents: 1 Drain Plug
- Head Size (SAE/Metric): 0.25 In
- Length: 1.13
- Magnetic:
- No
- Non
- Thread Type:
- Coarse
- Grueso
- Oversized Thread:
- No
- Non
- Describir el tipo: Tap??n De Drenaje De Aceite
- Special Tool Required:
- Oui
- S?¡
- Yes
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- Gasket Type:
- O-ring
- Sello Tipo O
- Socket Points: 4
- Contenidos del paquete: 1 Tap??n De Drenaje
- Método de drenaje: Tradicional
- Head Drive Type:
- Cuadrado
- Square
- Describe Type: Oil Drain Plug
- Tamaño del cabezal (SAE/métrico): 0,25in
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
12713651, 55498782
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | L | 2720 | 4 Cyl 2.7L | 166 |
- Rear Main Seal Cover Kit
- Product Attributes:
- Grade Type: Regular
- Package Contents:
- 1 Engine Rear Main Seal
- 12 Bolts
- Mounting Hole Diameter: 0.4
- Diámetro interior (in): 2.075 In.
- Longitud (in): 11 In
- Ancho (in): 10 In.
- Mounting Hole Quantity: 14
- Thickness: 0.66
-
Features:
- Direct replacement - this rear main seal cover matches the fit and function of the original equipment cover for a trouble-free installation
- Durable construction - this rear main seal cover is made of quality materials for a reliable fit and enduring service life
- Convenient solution - get a quality repair solution without the hassle of buying original equipment
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- This direct replacement rear main seal cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
This Part Fits the Following OEM/Substitute Numbers:
12617790, 12665077, 12705663
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | - | 6 Cyl 4.3L | 262 |
- Engine Oil Filler Cap
- Product Attributes:
- Grade Type: Regular
- Mounting Type: Cam On
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
12662196, 12667313, 8190, 9MO190, MO190
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- PermaTorque Engine Cylinder Head Gasket
- Head Bolts Not Included Head Bolt Replacement Recommended PermaTorqueMLS Head Gasket(s) Included
- FEL-PRO 26744 PT PermaTorque Engine Cylinder Head Gasket for Chevrolet Silverado 1500
- Product Attributes:
- : 100.2
- Cylinder Bore Diameter: 100.2
- Grade Type: Premium
- Gasket Sealant Included: No
- Thickness: 1.56
-
Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY -- Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL -- Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION -- Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL -- Precise embossed sealing beads at vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12622325, 12657968, 611078000
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- Spin-on Oil Filter
- DEFENSE
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.45
- Height: 4.111
- Non Slip Grip: No
- Gasket Thickness: 0.186
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: White
- Inside Thread Diameter: M22x1.5
- Bypass Relief Valve Setting: 22
- Inlet Type: Threaded
- Outside Diameter: 3
- Grade: Advanced
- Gasket Outside Diameter: 2.75
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
041-0843, 100255, 12690385, 12707246, 19330000, 1AMFL00006, 2100255, 27502, 27502MP, 37502, 47502, 47502T, 5184231AA, 57502, 57502XP, 67045, 67045BP, 67060X...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - GMC Sierra 1500 | V | - | 6 Cyl 4.3L | 262 |
Showing 1 - 10 of 40 products
Loading...