2023 Jeep Gladiator Engine Parts
Choose your Part Name for your 2023 Jeep Gladiator
Engine Core Plug
Engine Crankshaft Seal
Engine Cylinder Head Gasket Set
Engine Harmonic Balancer
Engine Intake Manifold
Engine Intake Manifold Gasket
Engine Intake Manifold Gasket Set
Engine Oil Drain Plug
Engine Oil Filter
Engine Oil Filter Adapter
Engine Oil Filter Adapter O-Ring
Engine Oil Filter Cover
Engine Oil Filter Housing
Engine Oil Filter Kit
Engine Oil Pump Pickup Tube Gasket
Engine Timing Cover Gasket Set
Engine Valve Cover
Engine Valve Cover Gasket
Image
Product
Price
- Harmonic Balancer Assembly
- Product Attributes:
- Keyway Type:
- Oui
- S?¡
- Yes
- Marcas de grados: No
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Harmonic Balancer
- Degree Markings:
- No
- Non
- Drive Belt Type:
- Serpentina
- Serpentine
- Contenidos del paquete: 1 Polea De Cig??e??al
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Keyway Type:
-
Features:
- Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
- Durable construction - stringent specifications and careful construction help ensure longevity
- Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.
This Part Fits the Following OEM/Substitute Numbers:
102343, 49252767248045104, 5184293AC, 5184293AG, 5184293AH, 7B0105251B, 7B0105251C, 7B0105251D, PB1707N
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Threads Per Inch: 0
- SAE or Metric:
- M??trico
- Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 16 Mm
- Length: 21.6
- Magnetic:
- No
- Non
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- Gasket Type:
- Gasket
- Junta
- Socket Points: M6 -1.0
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Método de drenaje: Tradicional
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Tamaño del cabezal (SAE/métrico): 16mm
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 2987 | 6 Cyl 3.0L | 182 |
- Oil Filter Cap - Plastic
- Packaging Type: Box
- Product Attributes:
- Package Contents: 1 Filter Cap With O-ring
- Contenidos del paquete: 1 Tapa Del Filtro Con Sello Tipo O
- Attachment Method:
- Roscado
- Threaded
-
Features:
- Ideal replacement - this engine oil filter cover is a direct replacement for the original equipment filter cover
- Durable construction - this part is specifically designed to withstand extreme underhood temperatures to resist cracking and leaking
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- Easy to install - no special tools required
- Cracked or stripped filter cover making oil changes difficult? This direct replacement oil filter cap matches the fit and function of the original equipment cap for a reliable repair.
This Part Fits the Following OEM/Substitute Numbers:
68191350AA, 7B0115433B
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 13Mm
- 13 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Threads Per Inch: 0
- SAE or Metric:
- M??trico
- Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 13 Mm
- Length: 0.83
- Magnetic:
- No
- Non
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 3
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- Gasket Type:
- Gasket
- Junta
- Socket Points: M6 -1.0
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Método de drenaje: Tradicional
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Tamaño del cabezal (SAE/métrico): 13 Mm
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
1013938, 1040, 1054, 1066, 11970pk, 323528, 6506214AA, 6507741AA, 6513414AA, 68094567AA, 7B0103193, 80-06, 80-26, AJ83017, AJ88461, F6TZ6730BA, LF1310404, YF091046Y...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 2987 | 6 Cyl 3.0L | 182 |
- Upgraded Aluminum Engine Oil Filter Housing With Oil Cooler And Filter
- Complete Assembly Improved Design ; Aluminum Construction w/Cooler w/Filter Assembly
- Product Attributes:
- Color/Finish: Natural
- Inlet Size (in):
- 0.57 In
- 0.57 In.
- Tamaño de la salida (in): 0,74in
- Diesel Engine Compatible:
- No
- Non
- Package Contents:
- 1 Oil Cooler
- 1 Oil Filter
- 1 Oil Filter Housing
- 1 Oil Filter Housing Cap
- 19 Seals And Gaskets
- 5 Engine Mounting Bolts
- Filter Adapter Type: Remote
- Oil Cooler Ports:
- Oui
- Yes
- Outlet Size (in): 0.74 In
- Tipo de adaptador del filtro: Remoto
- Rosca de la boquilla del adaptador del filtro: No
- Tamaño de la entrada (in): 0.57 In.
- Filter Element Included:
- Oui
- Yes
- Gasket Or Seal Included:
- Oui
- Yes
- Minimum Filter Diameter: 1.9
- Maximum Filter Diameter: 2.2
- Compatible con motores diesel: No
- Contenidos del paquete:
- 1 Caja Del Filtro De Aceite
- 1 Enfriador De Aceite
- 1 Filtro De Aceite
- 1 Tapa De La Caja Del Filtro De Aceite
- 19sellos Y Juntas
- 5tornillos De Montaje Del Motor
- Seals Included:
- Oui
- Yes
- Thickness: 0.065
- Filter Adapter Nipple Thread:
- No
- Non
- Oil Bypass Valve Included:
- Oui
- Yes
-
Features:
- Patented design - features high-pressure, die-cast aluminum housing construction to more reliably replace the failure-prone plastic housing on specific 2011 and later Chrysler, Dodge, Jeep and Ram vehicles with Pentastar engines
- Smarter solution - includes required gaskets, oil cooler, oil filter element and cap, bringing early fitments to latest generation filter specification
- see included instructions on filter cap
- Trustworthy quality - engineered in the United States and made with durable materials to precise specifications, including premium seals to further help resist future leaks
- Repair it once - don't replace a cracked oil filter adapter with one that can fail the same way again
- fix it the right way with this improved design
- The oil filter adapter on millions of Chrysler, Dodge, Jeep and Ram V6-powered vehicles often leaks oil when its plastic housing warps from harsh underhood conditions. As the plastic eventually degrades from heat and chemical exposure, it can even crack from simply tightening the oil filter cap during oil changes. When it fails, replacing it with an OEM housing could mean the same issues again in the future. This patented Dorman OE FIX filter housing is made entirely of aluminum for a more durable replacement of the failure-prone OEM housing to help prevent future leaks. The housing comes complete with mounting and intake manifold gaskets for an effective repair. The kit also includes the oil cooler, oil filter element, and oil filter cap to update the vehicle to the latest design.
This Part Fits the Following OEM/Substitute Numbers:
5184294AC, 7B0115401, OFH100
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Engine Intake Manifold
- Designed Specifically to Work w/Dorman OE Solutions Intake Manifold Gaskets Only
- Product Attributes:
- Deck Height: 5
- Elevador alto: No
- Preparado para EGR: S?¡
- CNC Ported:
- No
- Non
- Grade Type: Regular
- Length: 15
- Width: 7
- Installation Instructions Included:
- No
- Non
- Manifold Height (in): 6.7 In
- Montaje del compresor de aire acondicionado: No
- Center Maximum Height: 6
- Rear Maximum Height: 6.7
- Single Or Dual Plane Type:
- Plano Simple
- Single Plane
- Port Outlet Dimensions: 2.5
- Heated Choke Port:
- No
- Non
- Altura del colector (in): 6.7 In
- Air Conditioning Compressor Mount:
- No
- Non
- Package Contents: 1 Intake Manifold
- Mounting Hole Diameter: 0.125
- Alternator Mount:
- No
- Non
- Mounting Hole Quantity: 11
- EGR Ready:
- Oui
- Yes
- Port Quantity: 12
- High-Riser:
- No
- Non
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- Contenidos del paquete: 1m??ltiple De Admisi??n
- Front Maximum Height: 6.7
- Street Legal:
- Oui
- S?¡
- Yes
-
Features:
- Increases reliability - this upgraded intake manifold design features a deeper, more protective sensor shroud skirt and allows the MAP sensor to be located farther out of the path of EGR gases
- Saves time - cleaning soot buildup off a plastic manifold without damaging the manifold itself is time-consuming and difficult
- replacement is a more efficient and effective repair
- Saves money - allows existing functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors
- Restores proper operation - engineered to help restore engine power to proper level and clear corresponding trouble codes, including P2020 and P200A
- On certain vehicles with Chrysler EcoDiesel V6 engines, soot buildup in the intake manifold can cause a severe loss of power, smoke, and a burning smell. A dealer recall addresses failing EGR coolers on some EcoDiesels, but even if a cooler has been repaired under warranty, it may have already caused problems downstream that aren't immediately noticeable. Soot can accumulate inside the manifold, preventing proper operation of the IMRC system, while regeneration cycles to help clean the diesel particulate filter add even more soot and heat from the EGR system. Ultimately the soot buildup acts as an insulator, causing trapped heat to warp the manifold and create a leak. Manifold runners and the MAP sensor can also be damaged or melted, creating a burning polymer residue that adds to the fouling of the IMRC system. This upgraded Dorman OE FIX intake manifold features a deeper, more protective skirt on the sensor shroud, allowing the MAP sensor to be located farther out of the path of hot EGR gases. These engineering improvements can more effectively divert EGR heat and soot through the intake for a more reliable repair than the original design. This manifold can also help reduce cost by allowing still-functional sensors to be swapped into the new manifold, vs. the OEM replacement which can only be purchased with the MAP sensor, IMRC motor, and both runner sensors.
This Part Fits the Following OEM/Substitute Numbers:
68211167AA, 68211167AB, 68211167AC, 68490098AA, 68492577AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 2987 | Upper | DIESEL | 6 Cyl 3.0L | 182 |
- Upgraded Aluminum Engine Oil Filter Housing With Oil Cooler And Filter
- Improved Design Complete Assembly ; Aluminum Construction w/Cooler w/Filter Assembly
- Product Attributes:
- Color/Finish: Natural
- Inlet Size (in):
- 0.57 In
- 0.57 In.
- Tamaño de la salida (in): 0,74in
- Diesel Engine Compatible:
- No
- Non
- Package Contents:
- 1 Oil Cooler
- 1 Oil Filter
- 1 Oil Filter Housing
- 1 Oil Filter Housing Cap
- 19 Seals And Gaskets
- 5 Engine Mounting Bolts
- Filter Adapter Type: Remote
- Oil Cooler Ports:
- Oui
- Yes
- Outlet Size (in): 0.74 In
- Tipo de adaptador del filtro: Remoto
- Rosca de la boquilla del adaptador del filtro: No
- Tamaño de la entrada (in): 0.57 In.
- Filter Element Included:
- Oui
- Yes
- Gasket Or Seal Included:
- Oui
- Yes
- Minimum Filter Diameter: 1.9
- Maximum Filter Diameter: 2.2
- Compatible con motores diesel: No
- Contenidos del paquete:
- 1 Caja Del Filtro De Aceite
- 1 Enfriador De Aceite
- 1 Filtro De Aceite
- 1 Tapa De La Caja Del Filtro De Aceite
- 19sellos Y Juntas
- 5tornillos De Montaje Del Motor
- Seals Included:
- Oui
- Yes
- Thickness: 0.065
- Filter Adapter Nipple Thread:
- No
- Non
- Oil Bypass Valve Included:
- Oui
- Yes
-
Features:
- Patented design - features high-pressure, die-cast aluminum housing construction to more reliably replace the failure-prone plastic housing on specific 2011 and later Chrysler, Dodge, Jeep and Ram vehicles with Pentastar engines
- Smarter solution - includes required gaskets, oil cooler, oil filter element and cap, bringing early fitments to latest generation filter specification
- see included instructions on filter cap
- Trustworthy quality - engineered in the United States and made with durable materials to precise specifications, including premium seals to further help resist future leaks
- Repair it once - don't replace a cracked oil filter adapter with one that can fail the same way again
- fix it the right way with this improved design
- The oil filter adapter on millions of Chrysler, Dodge, Jeep and Ram V6-powered vehicles often leaks oil when its plastic housing warps from harsh underhood conditions. As the plastic eventually degrades from heat and chemical exposure, it can even crack from simply tightening the oil filter cap during oil changes. When it fails, replacing it with an OEM housing could mean the same issues again in the future. This patented Dorman OE FIX filter housing is made entirely of aluminum for a more durable replacement of the failure-prone OEM housing to help prevent future leaks. The housing comes complete with mounting and intake manifold gaskets for an effective repair. The kit also includes the oil cooler, oil filter element, and oil filter cap to update the vehicle to the latest design.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Engine Valve Cover
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Engine Valve Cover
- Grommets Included:
- No
- Non
- Length: 15.5
- Item Grade:
- Equipo Original
- Oem
- Width: 10.5
- Oil Filler Cap Included:
- No
- Non
- Height: 5
- Hold Down Tabs Included:
- No
- Non
- Valve Cover Gasket Included:
- Oui
- S?¡
- Yes
- Mounting Location:
- Per?¡metro
- Perimeter
- Contains Oil Baffles:
- Oui
- S?¡
- Yes
- Surface Type:
- Smooth
- Suave
- Cylinder Head Type: Dohc
- Construction:
- Injection Mold
- Molde De Inyecci??n
- Material Thickness: 0.4
- Contenidos del paquete: 1 Cubierta De La V?ílvula Del Motor
- Breather Cap Included:
- No
- Non
- Inside Clearance Height: 2.5
- Sheen Level:
- Semi-gloss
- Semibrillante
- Valve Cover Type:
- Corto
- Short
-
Features:
- Direct replacement - this valve cover matches the original equipment part for fit and function
- Durable construction - this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service
- This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
This Part Fits the Following OEM/Substitute Numbers:
116338011075595084, 68147538AA, 68147538AB
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 2987 | Right | 6 Cyl 3.0L | 182 |
- Engine Intake Manifold Gasket Set
- FEL-PRO MS 97204 Engine Intake Manifold Gasket Set for Jeep Grand Cherokee
- Product Attributes:
- Grade Type: Premium
-
Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES -- Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
111036401, MIS19879, MS19879
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 3604 | Lower and Upper | 6 Cyl 3.6L | 220 |
- Intake Manifold Gasket Kit
- Designed Specifically to Work w/Dorman OE Solutions Intake Manifold Only. Not for Replacement of Original Design Gaskets
- Product Attributes:
- Port Quantity: 14
- Cut To Fit:
- Oui
- Yes
- Manifold Gasket Bolt Hole Quantity: 4
- Dimensiones del puerto: 1.5 In
- Grade Type:
- Reemplazo Est?índar
- Standard
- Package Contents: 3 Gaskets
- Configuration:
- M??ltiples Piezas
- Multi Piece
- Contenidos del paquete: 3 Recept?ículos
- Port Dimensions: 1.5 In
- Valley Pan Included:
- No
- Non
- Encajado por cortes: S?¡
-
Features:
- Direct replacement - this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality - this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
This Part Fits the Following OEM/Substitute Numbers:
68148135AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 2987 | Upper | DIESEL | 6 Cyl 3.0L | 182 |
Showing 1 - 10 of 31 products
Loading...