1982 Jeep CJ7 Exhaust Parts
Choose your Part Name for your 1982 Jeep CJ7
Image
Product
Price
- Installs In Exhaust Manifold At Down Tube Connection Point; 2 Required
- Exhaust Manifold Stud; Installs In Exhaust Manifold At Down Tube Connection Point; 2 Required;
- Exhaust Manifold Stud
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Exhaust Manifold Stud
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Jeep CJ7 |
- Exhaust Manifold Gasket;
- Exhaust Manifold Gasket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Gasket
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
- Includes Gasket;Not Legal For Sale Or Use On Vehicles Registered In California
- Exhaust Manifold Kit; Includes Gasket;
- Exhaust Manifold Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Exhaust Manifold Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
- 2.25 in.
- Exhaust Clamp; 2.25 in.;
- Exhaust Clamp
- Product Attributes:
- WARNING CA Proposition 65: No
- Size: 2.250 In.
-
Features:
- Exhaust Clamp
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Jeep CJ7 |
- Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: Yes
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 4 Cyl 2.5L | 151 |
- Universal Catalytic Converter - 2.5in.
- CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.5in.
- 2.50in. Universal California Pre-OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Mounting Hardware Included: No
- Hangers Included: No
- Heat Shield Attached: Yes
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Substrate: Ceramic
- Air Tube Adaptable: No
- Clamp Included: No
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 4 Cyl 2.5L | 151 |
- 40 Series™ Delta Flow Muffler
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Delta Flow Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Type: Reflection
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Inlet Type: Single Offset
- Body Length: 13.000 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Diameter: 2.500 In.
- Mount Type: Uses New Hangers (not Included)
- Automotive Item Grade: High Performance
- Outlet Connection Type: Pipe
- Muffler Series: 40 Series Delta Flow
- Overall Length: 19.000 In.
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Shape: Oval
- Inlet Position: Offset
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Race Proven Patented Delta Flow® Technology
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- This two chamber design incorporates Flowmasters Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
- Includes Muffler And Tailpipe;Not Legal For Sale Or Use In California
- Exhaust Kit; Includes Muffler And Tailpipe;
- Exhaust Kit
- Product Attributes:
- Exhaust Type: Single
- Exit Position: Oem
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: N/a
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1982 - Jeep CJ7 |
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Diameter: 2
- Mounting Hardware Included: No
- Hangers Included: No
- Heat Shield Attached: Yes
- Body Width: 6.375
- Overall Length: 27
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Inlet Attachment: Clamp-on
- Main Piping Diameter: 2
- Body Shape: Oval
- Outlet Attachment: Clamp-on
- Sensor Port Count: 0
- Substrate: Ceramic
- Air Tube Adaptable: Yes
- Clamp Included: No
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
Showing 1 - 10 of 26 products
Loading...