1988 Chevrolet K2500 Exhaust Parts
Choose your Part Name for your 1988 Chevrolet K2500
Image
Product
Price
- Exhaust Manifold Gasket Set
- FEL-PRO MS 9275 B Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
18016, 18016GR, 3711675, 5748, 7423510, EMS303, MS 3188, MS3713, MS7110X, MSE50, RA1303, Z1669
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 8 Cyl 5.0L | 305 |
- Exhaust Pipe Gasket
- 1-3/4in Inside Diameter; Packing
- FEL-PRO 60556 Exhaust Pipe Gasket
- Product Attributes:
- Part Dimensions: 1 3/4" Id
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
13108, 131081, 131821, 14012686, 14037813, 14072686, 1552242, 31520, 521908, 7413362, 82-0141, EG24767, EG24867, EG767, EN1875, F20423, F7269, F7447...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 8 Cyl 6.2L | 379 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 16 Pcs in kit; Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 6 Cyl 4.3L | 262 |
- Wedge-Locking Header Bolts; Hex Head; 3/8 dia. X 1in Black Oxide ; 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 1 Inch Long; Black Oxide Finish; 12 Pcs in kit; Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 6 Cyl 4.3L | 262 |
- DynoMax Intermediate Pipe
- 2.5 in. System Cut Outlet End To Required Length If Needed~w/Single Outlet~131.5 in. Wheelbase Requires PN[35103] Hanger
- DynoMax Intermediate Pipe
- Tail Pipe Extension Pipe
- Product Attributes:
- Most Popular Make/Model: Chevrolet C1500
- Outlet Connection Type: Pipe
- Outlet Diameter Designation: Outside Diameter
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: No
- Fitment: Direct Fit
- Overall Length: 27.500 In.
- Pipe Thickness: 0.054 In.
- Class: Pw
- Product Grade: Premium
- Min Year Covered: 1988
- Main Piping Diameter: 2.500 In.
- Inlet Diameter Designation: Inside Diameter
- Outlet Quantity: 1
- Tail Pipe Diameter: 2.500 In.
- Max Year Covered: 1993
- Most Popular Year: 1993
- Inlet Quantity: 1
- Mandrel Bent: Yes
- Total Part VIO: 264632
- Inlet Connection Type: Pipe
- Outlet Diameter: 2.500 In.
-
Features:
- Manufactured w/Precision Benders
- Fixture Checked
- Insuring Every Part Fits Perfectly
- Providing Quick Easy Installation
- Mandrel Bends Improve Flow Capacity Over Traditional Bends
- Combines State Of The Are Engineering w/Quality Material
- Provides Exceptional Strength And Durability
- Pipe Diameter Are Increased From OEM Sizes To Improve Flow
- Expandable Bushings For Custom Applications
- Proudly Manufactured In The USA
- Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax(R) Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax(R) products – engineered for "Pure Unadulterated Power" –¬ include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax(R) product features the benefits of worldwide global engineering resources. The DynoMax(R) brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 6 Cyl 4.3L | 96.0 | Standard Cab Pickup | 262 |
- DynoMax Super Turbo Muffler
- Universal; Oval; 4.25 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25.5 in. Overall Length w/Single Outlet
- DynoMax Super Turbo Muffler
- Super Turbo Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 25.500 In.
- Muffler Type: Combination
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Flow Director: Yes
- Outlet Configuration: Offset
- Body Height: 4.250 In.
- Muffler Body Length: 20.000 In.
- Outlet Quantity: 1
- Max Year Covered: 1993
- Most Popular Year: 1993
- Muffler Body Height: 4.250 In.
- Muffler Body Finish: Aluminized
- Muffler Count: 1
- Inlet Type: Single Offset
- Total Part VIO: 264632
- Body Length: 20.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Chevrolet C1500
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 25.500 In.
- Inlet Inside Diameter: 2.500 In.
- Muffler Inlet Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Product Grade: Economy
- Min Year Covered: 1988
- Inlet Diameter Designation: Inside Diameter
- Main Piping Diameter: 2.500 In.
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Steel
- Muffler Body Shape: Oval
- Inlet Position: Offset
- Muffler Reversible: Yes
- Outlet Type: Single Offset Outlet
-
Features:
- Exclusive Patented Flow Director Design Channels Exhaust Flow
- Eliminates Turbulence
- Large Internal Flow Tubes Improve Exhaust Flow
- Large Internal Flow Tubes Reduce Backpressure
- Fiberglass Matting Tech To Absorb Unwanted Interior Resonance
- Maintains A Mellow Performance Tone
- Dyno Proven To Flow Up To 700 SCFM/Support Up To 636 HP
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 6 Cyl 4.3L | 262 |
- DynoMax Super Turbo Muffler
- Universal; Oval; 4.25 in. x 9.75 in.; 3 in. And 2.5 in. ID; 13 in. Shell Length; 17 in Overall Length; No Flow Directors Under 8600 Gross Vehicle Weight~Dual Exhaust~Exits In Rear On Either Side Of License Plate
- DynoMax Super Turbo Muffler
- Super Turbo Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 17.000 In.
- Muffler Type: Combination
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Flow Director: No
- Outlet Configuration: Offset
- Body Height: 4.250 In.
- Muffler Body Length: 13.000 In.
- Outlet Quantity: 2
- Max Year Covered: 2008
- Most Popular Year: 2004
- Muffler Body Height: 4.250 In.
- Muffler Body Finish: Aluminized
- Muffler Count: 1
- Inlet Type: Single Offset
- Total Part VIO: 6680502
- Body Length: 13.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Chevrolet Silverado 1500
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 17.000 In.
- Outlet Outside Diameter: 2.500 In.
- Product Grade: Economy
- Min Year Covered: 1994
- Inlet Diameter Designation: Inside Diameter
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Steel
- Muffler Body Shape: Oval
- Inlet Position: Offset
- Muffler Reversible: No
- Outlet Type: Dual Outlet
-
Features:
- Exclusive Patented Flow Director Design Channels Exhaust Flow
- Eliminates Turbulence
- Large Internal Flow Tubes Improve Exhaust Flow
- Large Internal Flow Tubes Reduce Backpressure
- Fiberglass Matting Tech To Absorb Unwanted Interior Resonance
- Maintains A Mellow Performance Tone
- Dyno Proven To Flow Up To 700 SCFM/Support Up To 636 HP
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 8 Cyl 5.7L | 350 |
- DynoMax Super Turbo Muffler
- Universal; Oval; 4.25 in. x 9.75 in.; 3 in. And 2.5 in. ID; 13 in. Shell Length; 17 in Overall Length; No Flow Directors Under 8600 Gross Vehicle Weight~Dual Exhaust
- DynoMax Super Turbo Muffler
- Super Turbo Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 17.000 In.
- Muffler Type: Combination
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Flow Director: No
- Outlet Configuration: Offset
- Body Height: 4.250 In.
- Muffler Body Length: 13.000 In.
- Outlet Quantity: 2
- Max Year Covered: 2008
- Most Popular Year: 2004
- Muffler Body Height: 4.250 In.
- Muffler Body Finish: Aluminized
- Muffler Count: 1
- Inlet Type: Single Offset
- Total Part VIO: 6680502
- Body Length: 13.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Chevrolet Silverado 1500
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 17.000 In.
- Outlet Outside Diameter: 2.500 In.
- Product Grade: Economy
- Min Year Covered: 1994
- Inlet Diameter Designation: Inside Diameter
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Steel
- Muffler Body Shape: Oval
- Inlet Position: Offset
- Muffler Reversible: No
- Outlet Type: Dual Outlet
-
Features:
- Exclusive Patented Flow Director Design Channels Exhaust Flow
- Eliminates Turbulence
- Large Internal Flow Tubes Improve Exhaust Flow
- Large Internal Flow Tubes Reduce Backpressure
- Fiberglass Matting Tech To Absorb Unwanted Interior Resonance
- Maintains A Mellow Performance Tone
- Dyno Proven To Flow Up To 700 SCFM/Support Up To 636 HP
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 6 Cyl 4.3L | 262 |
- Hardware-Clamp HD. 2 1/2in. U-Bolt
- Size 2.5 in.; Heavy Duty; Steel 2 1/2 in. System
- Hardware-Clamp
- Walker U-Bolt Clamp
- Product Attributes:
- Most Popular Make/Model: Ford F-150
- Nut Type: Hex
- Saddle Gauge: 11
- WARNING CA Proposition 65: No
- Saddle Hole Type: Round
- Size: 2.500 In.
- Hardware Material: Steel
- Class: A
- Product Grade: Economy
- Min Year Covered: 1963
- Max Year Covered: 2016
- Most Popular Year: 2004
- U Bolt Diameter: 0.375 In.
- Total Part VIO: 23844610
- Diameter (in.): 2.500 In.
- Clamp Type: U-bolt
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Chevrolet K2500 |
- Exhaust Gasket-GM V8, SB Chev Stock Port
- Suggested Torque: 20 Ft Lbs; 1-3/8"w x 1-1/2"h Square Port - Matches Stock Cast Iron Head Port; (Compare to Fel-Pro #1404); Manifold & Header Applications; 2/Set (See PN 2016 for Square Tube Weld Bead Header applications.)
- V8 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 (1955 +), 1-3/8"w x 1-1/2"h Square Port - Matches Stock Cast Iron Head Port, (Compare to Fel-Pro #1404), Manifold and Header Applications, 2/Set
- Product Attributes:
- Title: Remflex Exhaust Gasket
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet K2500 | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 81 products
Loading...