1989 Isuzu Pickup Exhaust Parts
Choose your Part Name for your 1989 Isuzu Pickup
Image
Product
Price
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1989 - Isuzu Pickup | Rear | 1 Ton |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -08/1988, Header pipe Outlet
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2559 | 4 Cyl 2.6L | - | To:08-00-88 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 09/1988-, Header pipe Outlet for non-California Models
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2559 | 4 Cyl 2.6L | - | Fr:09-00-88 |
- Universal Catalytic Converter - 2.5in.
- CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.5in.
- 2.50in. Universal California Pre-OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Substrate: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2559 | 4 Cyl 2.6L | - |
- Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2559 | 4 Cyl 2.6L | - |
- Production: 09/01/1988-, with California
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2559 | 4 Cyl 2.6L | - | Fr:09-01-88 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2254 | 4 Cyl 2.3L | RWD | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 17
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Bolt-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23652 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1981-1995 Isuzu Pickup, 1975-1982 Chevrolet LUV, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
This Part Fits the Following OEM/Substitute Numbers:
8-25143-676-0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2254 | 4 Cyl 2.3L | - |
- Standard Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 13
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Oval
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2254 | 4 Cyl 2.3L | - |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.5
- Outlet Attachment: Bolt-on
- Sensor Port Count: 0
- Heat Shield Material: Aluminized Steel
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
8-25143-676-0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Isuzu Pickup | L | 2559 | 4 Cyl 2.6L | - |
Showing 1 - 10 of 10 products
Loading...