1994 Chevrolet S10 Blazer Exhaust Parts
Choose your Part Name for your 1994 Chevrolet S10 Blazer
Image
Product
Price
- Exhaust Manifold Gasket Set
- FEL-PRO MS 95842 Exhaust Manifold Gasket Set for Chevrolet S10
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
111082901, 12529193, 18673, 18675, 799359, MS12407, MS15251
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | W | Vortec | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- Standard Grade Universal Catalytic Converter - 3.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 3
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | Z | 262 |
- Straight-Through Performance Muffler; 2.5in. Offset/Offset; 4x14x9 Body
- Magnaflow Straight-Through Performance Muffler; 2.5in. Offset/Offset; 4x14x9 Body
- Satin Finish 2.5x2.5in. Oval Exhaust Muffler
- Product Attributes:
- Outlet Quantity: 1
- Muffler Type: Straight-through
- Inlet Quantity: 1
- Exhaust Tip Quantity: 0
- Outlet Inside Diameter: 2.5
- Core Diameter: 2.5
- Reversible: Yes
- Inlet Inside Diameter: 2.5
- Hanger Included: No
- Body Height: 4
- Body Material: Stainless Steel
-
Features:
- Delivers a Smooth, Deep Tone
- 100% Stainless Steel
- Mufflers are Bi-Directional
- The MagnaFlow 4 X 9in. Oval Straight-Through Performance Exhaust Muffler 11236 is engineered to enhance your ride with a healthy helping of our signature exhaust sound and dyno-proven performance thanks to its free-flowing straight-through perforated stainless steel core wrapped in stainless steel mesh and acoustic fiber fill. The reversible, universal 2.5/2.5in. diameter inlet/outlet Straight-Through layout allows you to install it in whatever orientation and configuration you see fit. However, professional installation is highly recommended. Muffler 11236s weight-optimized 4x9x14in. oval-shaped body features a satin finish that elevates the overall aesthetics of your current exhaust setup. 11236 is made of durable, corrosion resistant stainless steel and produced using cutting-edge CNC precision robotic manufacturing techniques, all backed by MagnaFlow's limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- Wedge-Locking Header Bolts
- Hex Head 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet S10 Blazer | V | - | 6 Cyl 4.3L | 262 |
- Double Ended Stud - (3) Springs (3) Studs (3) Lock Nuts
- 3 Per Package Exhaust Stud Has Interference Threads Package Quantity: 1
- Product Attributes:
- Integral Washer Inside Diameter: 0.77
- Sujetador de punta piloto: No
- Spring End 2 Inside Diameter: 0.52
- Bolt Length: 3.43
- Bolt Material:
- Acero
- Steel
- Bolt Grade: 5
- Spring Color:
- Plateado
- Silver
- Dog Point Fastener:
- Oui
- Yes
- Sujetador de punta cilíndrica: Sí
- Bolt Thread Length: 0.53
- Bolt Thread Type:
- Coarse
- Grueso
- Bolt Thread Diameter: 0.37
- Pilot Point Fastener:
- No
- Non
- Bolt Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 3 Pernos, 3 Resortes, 3 Tuercas De Seguridad
- Spring Included:
- Oui
- Sí
- Yes
- Spring End 1 Inside Diameter: 0.52
- Spring Material:
- Aluminio
- Aluminum
-
Features:
- Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
- Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system
- Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life
- Quality tested - kit components have undergone extensive testing to ensure proper function and long service life
- This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
36463, 8038
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1994 - Chevrolet S10 Blazer | Front |
Showing 1 - 10 of 35 products
Loading...