1995 Chrysler Intrepid Exhaust Parts
Choose your Part Name for your 1995 Chrysler Intrepid
Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Chrysler Intrepid |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 3
- Body Height: 3
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 8
- Body Type: Spun
- Inlet Inside Diameter: 2
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Chrysler Intrepid | V | 3497 | Front Left | Canada | 6 Cyl 3.5L | 215 |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 3
- Body Height: 3
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 8
- Body Type: Spun
- Inlet Inside Diameter: 2
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Chrysler Intrepid | V | 3497 | Front Right | Canada | 6 Cyl 3.5L | 215 |
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 3
- Body Type: Spun
- Body Height: 3
- Subtitle: Federal / Epa Compliant
- Substrate Material: Metallic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Chrysler Intrepid | V | 3497 | Front Right | Canada | 6 Cyl 3.5L | 215 |
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 3
- Body Type: Spun
- Body Height: 3
- Subtitle: Federal / Epa Compliant
- Substrate Material: Metallic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Chrysler Intrepid | V | 3497 | Front Left | Canada | 6 Cyl 3.5L | 215 |
Showing 1 - 5 of 5 products
Loading...