1995 Ford Contour Exhaust Parts
Choose your Part Name for your 1995 Ford Contour
Image
Product
Price
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Angled
- Outlet Orientation: Straight
- Inlet Diameter: 2.25
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 5.125
- Body Type: Clam Shell
- Body Height: 3.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Manual | Rear | 6 Cyl 2.5L | 155 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5E212-C
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Manual | 6 Cyl 2.5L | 155 |
- Manifold Catalytic Converter
- with Male Fitting At Exhaust Gas Recirculation (EGR)
- Manifold Catalytic Converter
- Exhaust Manifold with Integrated Catalytic Converter HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5G232-BA, F5RZ 5G232-CA, F6RZ 5G232-BA, F8RZ 5G232-BC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Rear | 6 Cyl 2.5L | 155 |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 29.25
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Bolt-on
-
Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Simplifies installation with essential gaskets and hardware being included in the box
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23326 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-1997 Ford Contour and 1995-1997 Mercury Mystique, this direct-fit catalytic converter also interchanges with OE part F5RZ-5E212-C. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5E212-C, F5RZ-5E212-C
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Manual | 6 Cyl 2.5L | 155 |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 21.5
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Bolt-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23395 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-2000 Ford Contour, 1999-2000 Mercury Cougar, and more, this direct-fit catalytic converter also interchanges with OE part F5RZ-5E212-D. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5E212-D, F5RZ-5E212-D
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Automatic | 6 Cyl 2.5L | 155 |
- Manifold Catalytic Converter
- Manifold Catalytic Converter
- Exhaust Manifold with Integrated Catalytic Converter HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5G232-BA, F6RZ 5G232-AG, F8RZ 5G232-AC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Front | 6 Cyl 2.5L | 155 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5E212-D
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Automatic | 6 Cyl 2.5L | 155 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.25
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F7RZ 5E212-FL
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Contour | L | 1989 | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1995 - Ford Contour | Converter To Resonator Assembly |
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Ford Contour | V | 2450 | Automatic | Rear | 6 Cyl 2.5L | 155 |
Showing 1 - 10 of 13 products
Loading...