1997 Chevrolet Corvette Exhaust Parts
Choose your Part Name for your 1997 Chevrolet Corvette
Image
Product
Price
- Wedge-Locking Header Bolts; Hex Head; 3/8 dia. X 1in Black Oxide ; 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 1 Inch Long; Black Oxide Finish; 12 Pcs in kit; Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 16 Pcs in kit; Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Hardware-Clamp HD. 2 1/2in. U-Bolt
- Size 2.5 in.; Heavy Duty; Steel 2 1/2 in. System
- Hardware-Clamp
- Walker U-Bolt Clamp
- Product Attributes:
- Most Popular Make/Model: Ford F-150
- Nut Type: Hex
- Saddle Gauge: 11
- WARNING CA Proposition 65: No
- Saddle Hole Type: Round
- Size: 2.500 In.
- Hardware Material: Steel
- Class: A
- Product Grade: Economy
- Min Year Covered: 1963
- Max Year Covered: 2016
- Most Popular Year: 2004
- U Bolt Diameter: 0.375 In.
- Total Part VIO: 23844610
- Diameter (in.): 2.500 In.
- Clamp Type: U-bolt
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Chevrolet Corvette |
- Exhaust Gasket-GM V8, 4.8L-5.7L LS1, LS6
- Product Attributes:
- Title: Remflex Exhaust Gasket
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 1997 - Chevrolet Corvette | United States | Base |
- Exhaust Gasket-GM V8, SB Chev Sq Port, Headers
- Suggested Torque: 20 Ft Lbs; 1-17/32"w x 1-19/32"h Square Port; (Compare to Fel-Pro #1404/1405); Header Applications; 2/Set (Popular for aftermarket aluminum heads - AFR; Dart and others.) (See PN 2016 for Weld Bead Header applications)
- V8 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 (1955+), 1-17/32"w x 1-19/32"h Square Port, Header Applications, 2/Set (Popular for aftermarket aluminum heads - AFR, Dart and others.) (See PN 2016 for Weld Bead Header applications)
- Product Attributes:
- Title: Remflex Exhaust Gasket
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Exhaust Gasket-GM V8, SB Chev Stock Port
- Suggested Torque: 20 Ft Lbs; 1-3/8"w x 1-1/2"h Square Port - Matches Stock Cast Iron Head Port; (Compare to Fel-Pro #1404); Manifold & Header Applications; 2/Set (See PN 2016 for Square Tube Weld Bead Header applications.)
- V8 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 (1955 +), 1-3/8"w x 1-1/2"h Square Port - Matches Stock Cast Iron Head Port, (Compare to Fel-Pro #1404), Manifold and Header Applications, 2/Set
- Product Attributes:
- Title: Remflex Exhaust Gasket
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Exhaust gasket-GM V8, SB Chev Diameter RP, Header
- Suggested Torque: 20 Ft Lbs;1-9/16ö Diameter Round Port; (Compare to Fel-Pro #1426); Header Applications; 2/Set (See PN 2031 for Weld Bead Header Applications)
- V8 - 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, (1955+), 1-9/16" Diameter Round Port, (Compare to Fel-Pro #1426), Header Applications, 2/Set (See PN 2031 for Weld Bead Header Applications)
- Product Attributes:
- Title: Remflex Exhaust Gasket
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Single 2.5 in. Into Muffler Dual 2 in. Out; Includes Conn. Pipes/Mufflers/Hardware/4 in. x 7 in. Dual Round Tips; Dual Split Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Classic Cat-Back™ Exhaust System; Single 2.5 in. Into Muffler Dual 2 in. Out; Includes Conn. Pipes/Mufflers/Hardware/4 in. x 7 in. Dual Round Tips; Dual Split Rear Exit;
- S-Type Classic Cat-Back™ Exhaust System
- Product Attributes:
- Tail Pipe Diameter:
- 2.000 In.
- 2.500 In.
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Turbo
- Exit Position: Split Rear
- System Type: Cat Back
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Tail Pipe Diameter:
-
Features:
- Straight-Through Technology
- Aggressive
- Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Made From High-Quality T-304 Austenitic Stainless Steel
- Mandrel Bent Pipes
- Ensures Legendary Quality And Durability
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Single 2.5 in. Into Muffler Dual 2 in. Out; Includes Conn. Pipes/Mufflers/Hdw./4.25 in. x 3.5 in. Dual Oval Tips; Dual Split Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Classic Cat-Back™ Exhaust System; Single 2.5 in. Into Muffler Dual 2 in. Out; Includes Conn. Pipes/Mufflers/Hdw./4.25 in. x 3.5 in. Dual Oval Tips; Dual Split Rear Exit;
- S-Type Classic Cat-Back™ Exhaust System
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Turbo
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter:
- 2.000 In.
- 2.500 In.
- Exit Position: Split Rear
- Tip Diameter: 4.250 In.
- System Type: Cat Back
-
Features:
- Straight-Through Technology
- Aggressive
- Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Made From High-Quality T-304 Austenitic Stainless Steel
- Mandrel Bent Pipes
- Ensures Legendary Quality And Durability
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Single 2.5 in. Into Muffler Dual 2 in. Out; Includes Connecting Pipes/Mufflers/Hdw./4.25 in. Dual Oval Rolled Angle-Cut Tips; Split Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- ATAK® Cat-Back™ Exhaust System; Single 2.5 in. Into Muffler Dual 2 in. Out; Includes Connecting Pipes/Mufflers/Hdw./4.25 in. Dual Oval Rolled Angle-Cut Tips; Split Rear Exit;
- ATAK® Cat-Back™ Exhaust System
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Axle-back
- Dual
- Muffler Type: Turbo
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter:
- 2.000 In.
- 2.500 In.
- Exit Position: Dual Split Rear
- Tip Diameter: 4.250 In.
- System Type: Cat Back
-
Features:
- Patented Straight-Through Technology
- Patented Multi-Core Technology
- Unleash Hidden Horsepower
- Distinctive Borla Sound Of Power
- Absolute Best In Performance And Durability
- Ensure Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 34 products
Loading...