Select a vehicle to find exact fit parts

1998 Ford Mustang

1998 Ford Mustang Exhaust Parts

Choose your Part Name for your 1998 Ford Mustang

Catalytic Converter Exhaust Clamp Exhaust Manifold Gasket Set Exhaust Manifold Nut Exhaust Muffler Exhaust Pipe to Manifold Gasket Exhaust System Kit

Showing 1 - 10 of 44 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1998 Ford Mustang Catalytic Converter - Rear Right 8 Cyl 4.6L Magnaflow

California Universal Catalytic Converter - 2.25in.
CARB Executive Order D-193-96 Engine Family Number (EFN) WFMXV04.6DAA Engine Family Number (EFN) WFMXV04.6SAA Engine Family Number (EFN) WFMXV04.6DCA Engine Family Number (EFN) WFMXV04.6DBA Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
Magnaflow California Universal Catalytic Converter - 2.25in.
2.25in.
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Series: California
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-96
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 441005
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 441005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1998 - Ford Mustang	V	-	Rear Right	8 Cyl 4.6L	281

2 In Stock

Limited-Time Offer

$687.36 USD

$824.83 USD


Brand	Magnaflow
Part #	M66441005
Condition	New
Warehouse	B

UPC: 841380069832

1998 Ford Mustang Catalytic Converter - Rear Left 8 Cyl 4.6L Magnaflow

California Universal Catalytic Converter - 2.25in.
CARB Executive Order D-193-96 Engine Family Number (EFN) WFMXV04.6SAA Engine Family Number (EFN) WFMXV04.6DCA Engine Family Number (EFN) WFMXV04.6DBA Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
Magnaflow California Universal Catalytic Converter - 2.25in.
2.25in.
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Series: California
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-96
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 441005
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 441005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1998 - Ford Mustang	V	-	Rear Left	8 Cyl 4.6L	281

2 In Stock

Limited-Time Offer

$687.36 USD

$824.83 USD


Brand	Magnaflow
Part #	M66441005
Condition	New
Warehouse	B

UPC: 841380069832

1998 Ford Mustang Exhaust Manifold Gasket Set 8 Cyl 4.6L FelPro

Exhaust Manifold Gasket Set
Manifold Bolts Not Included Premium Material Gasket(s) Included
FEL-PRO MS 98017 Exhaust Manifold Gasket Set for Ford F-150
Product Attributes:
- Grade Type: Premium
- Configuration: Multi Piece
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

This Part Fits the Following OEM/Substitute Numbers:

111020601, 815377200, MS16112, MS19535

Additional Fitment Information:

Vehicle	Block	CC	Cylinder Head Type	Engine	Engine VIN	CID
1998 - Ford Mustang	V	-	SOHC	8 Cyl 4.6L	X	281

6 In Stock

Limited-Time Offer

$28.19 USD

$33.83 USD


Brand	FelPro
Part #	F10MS 98017
Condition	New
Warehouse	B

UPC: 019826226143

1998 Ford Mustang Exhaust Clamp 8 Cyl 4.6L Dynomax

Hardware-Clamp 2 1/2in. Narrow Band-Stain.
Size 2.5 in.; 430 Bright Stainless Steel 2 1/2 in. Band
Hardware-Clamp
Walker Exhaust Band Clamp
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	SVT Cobra	281

10 In Stock

Limited-Time Offer

$22.77 USD

$27.32 USD


Brand	Dynomax
Part #	D2236438
Condition	New
Warehouse	B

1998 Ford Mustang Exhaust Clamp Dynomax

Hardware-Clamp HD. 2 1/2in. U-Bolt
Size 2.5 in.; Heavy Duty; Steel Dual Exhaust~2 1/2 in. System
Hardware-Clamp
Walker U-Bolt Clamp
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Sub Model
1998 - Ford Mustang	SVT Cobra

144 In Stock

Limited-Time Offer

$7.74 USD

$9.29 USD


Brand	Dynomax
Part #	D2235337
Condition	New
Warehouse	B

1998 Ford Mustang Exhaust Muffler 6 Cyl 3.8L Dynomax

DynoMax Ultra-Flo Welded Muffler
Oval; 2.5 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall Length; Offset/Offset; Reversible; Stainless Steel
DynoMax Ultra Flo Welded Muffler
Ultra Flo™ Welded Universal Muffler
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	6 Cyl 3.8L	Base	232

4 In Stock

Limited-Time Offer

$179.02 USD

$214.82 USD


Brand	Dynomax
Part #	D2217222
Condition	New
Warehouse	B

1998 Ford Mustang Catalytic Converter - Rear 8 Cyl 4.6L Magnaflow

HM Grade Universal Catalytic Converter - 2.50in.
Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99006hm
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99006HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	Rear	8 Cyl 4.6L	SVT Cobra	281

5 In Stock

Limited-Time Offer

$303.37 USD

$364.04 USD


Brand	Magnaflow
Part #	M6699006HM
Condition	New
Warehouse	B

UPC: 841380031587

1998 Ford Mustang Catalytic Converter - Rear 6 Cyl 3.8L Magnaflow

HM Grade Universal Catalytic Converter - 2.25in.
Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99005hm
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99005HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1998 - Ford Mustang	V	-	Rear	6 Cyl 3.8L	232

10 In Stock

Limited-Time Offer

$303.37 USD

$364.04 USD


Brand	Magnaflow
Part #	M6699005HM
Condition	New
Warehouse	B

UPC: 841380031570

1998 Ford Mustang Catalytic Converter - Rear Left 8 Cyl 4.6L Magnaflow

HM Grade Universal Catalytic Converter - 2.50in.
Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99206hm
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	Rear Left	8 Cyl 4.6L	GT	281

33 In Stock

Limited-Time Offer

$243.24 USD

$291.89 USD


Brand	Magnaflow
Part #	M6699206HM
Condition	New
Warehouse	B

UPC: 841380031440

1998 Ford Mustang Catalytic Converter - Right Center 8 Cyl 4.6L Magnaflow

HM Grade Universal Catalytic Converter - 2.50in.
Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99206hm
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.