1999 Ford Contour Exhaust Parts
Choose your Part Name for your 1999 Ford Contour
Image
Product
Price
- Universal Catalytic Converter - 2.00in.
- CARB Executive Order D-193-124 Engine Family Number XFMXV02.5VBC ; Certification Level : TIER1 OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- 2in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | 6 Cyl 2.5L | 155 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | 6 Cyl 2.5L | LX | 155 |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 21.5
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Bolt-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23395 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-2000 Ford Contour, 1999-2000 Mercury Cougar, and more, this direct-fit catalytic converter also interchanges with OE part F5RZ-5E212-D. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5E212-D, F5RZ-5E212-D
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Automatic | 6 Cyl 2.5L | SE | 155 |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 30.75
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Bolt-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23397 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2000-2002 Mercury Cougar, 1998-2000 Ford Contour, and more, this direct-fit catalytic converter also interchanges with OE part F8RZ-5E212-BC. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1S8Z 5E212-EA, F8RZ 5E212-BC, F8RZ 5E212-CC, F8RZ-5E212-BC
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Manual | Rear | 6 Cyl 2.5L | LX | 155 |
- HM Grade Manifold Catalytic Converter
- Magnaflow HM Grade Manifold Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: No
- Grade Type: Regular
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 24.25
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Clamps Included: No
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Sensor Port Count: 2
- Inlet Type: Flanged
- Converter Body Length: 7.75
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Flanged
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50301. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1995-2000 Ford Contour, 1999-2000 Mercury Cougar, and more, this direct-fit catalytic converter also interchanges with OE part F5RZ-5G232-BA. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5G232-BA, F5RZ-5G232-BA, F6RZ 5G232-AG, F8RZ 5G232-AC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Front | Mexico | 6 Cyl 2.5L | Power | 155 |
- HM Grade Manifold Catalytic Converter
- Magnaflow HM Grade Manifold Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: No
- Grade Type: Regular
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 13
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Clamps Included: No
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Sensor Port Count: 1
- Inlet Type: Flanged
- Converter Body Length: 8.5
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Flanged
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50302. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1995-2000 Ford Contour, 1999-2000 Mercury Cougar, and more, this direct-fit catalytic converter also interchanges with OE part F5RZ-5G232-CA. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5G232-BA, F5RZ 5G232-CA, F5RZ-5G232-CA, F6RZ 5G232-BA, F8RZ 5G232-BC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Rear | Mexico | 6 Cyl 2.5L | Power | 155 |
- Manifold Catalytic Converter
- Manifold Catalytic Converter
- Exhaust Manifold with Integrated Catalytic Converter HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5G232-BA, F6RZ 5G232-AG, F8RZ 5G232-AC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Front | 6 Cyl 2.5L | SE | 155 |
- Manifold Catalytic Converter
- Manifold Catalytic Converter
- Exhaust Manifold with Integrated Catalytic Converter HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5G232-BA, F5RZ 5G232-CA, F6RZ 5G232-BA, F8RZ 5G232-BC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Rear | 6 Cyl 2.5L | SE | 155 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
F5RZ 5E212-D
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Automatic | 6 Cyl 2.5L | SE | 155 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
1S8Z 5E212-EA, F8RZ 5E212-BC, F8RZ 5E212-CC
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1999 - Ford Contour | V | 2450 | Manual | Rear | 6 Cyl 2.5L | SE | 155 |
Showing 1 - 10 of 11 products
Loading...