2001 Chevrolet Suburban 1500 Exhaust Parts
Choose your Part Name for your 2001 Chevrolet Suburban 1500
Image
Product
Price
- Wedge-Locking Header Bolts; Hex Head; 3/8 dia. X 1in Black Oxide ; 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 1 Inch Long; Black Oxide Finish; 12 Pcs in kit; Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | - | 8 Cyl 5.7L | 350 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 16 Pcs in kit; Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | - | 8 Cyl 5.7L | 350 |
- DynoMax Stainless Steel Tip
- 4 in. T-304 Stainless Steel; Single Wall; Slant Cut; Length 12 in.; Inlet 3 in.; Includes Clamp; w/DynoMax(R) Embossed Logo Includes Clamp
- DynoMax Stainless Steel Tip
- Exhaust Tip
- Product Attributes:
- Most Popular Make/Model: Ford F-150
- Outlet Connection Type: Spout
- Outlet Diameter Designation: Outside Diameter
- WARNING CA Proposition 65: No
- Overall Length: 12.000 In.
- Class: Pb
- Product Grade: Premium
- Min Year Covered: 2001
- Inlet Diameter Designation: Inside Diameter
- Outlet Quantity: 1
- Max Year Covered: 2020
- Most Popular Year: 2005
- Shape: Angle Cut
- Inlet Quantity: 1
- Usage: Automotive
- Total Part VIO: 15996069
- Inlet Connection Type: Pipe
- Outlet Type: Single Outlet
-
Features:
- Polished Stainless Steel w/DynoMax Etching
- Weldless Construction
- Double Wall Design
- T-304 Stainless Steel
- Easy To Install
- Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax(R) Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax(R) products – engineered for "Pure Unadulterated Power" –¬ include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax(R) product features the benefits of worldwide global engineering resources. The DynoMax(R) brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- Exhaust Gasket-GM V8, 4.8L-5.7L LS1, LS6
- Product Attributes:
- Title: Remflex Exhaust Gasket
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2001 - Chevrolet Suburban 1500 | Canada | LT |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-101 Engine Family Number 1GMXA05.3185 ; Certification Level : LEV1 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: Yes
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | Rear Left | 8 Cyl 5.3L | 325 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-101 Engine Family Number 1GMXA05.3185 ; Certification Level : LEV1 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: Yes
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | Rear Right | 8 Cyl 5.3L | 325 |
- Exhaust Manifold Gasket Set
- FEL-PRO MS 92467 Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
18813, MS16124
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- Single Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Single Passenger Side Rear
- Tip Type: Welded;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Bolt-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- 1-3/4 in. Tubing Dia.; 3 in. Collector Dia.; Includes Gaskets And Hardware; Black Coating For Pre-Use Protection Only;Not Legal For Sale Or Use In California Use With Y-Pipes 82-1176; 82-1176 Will Not Fit 6.0L~Hook Ups For Smog And Engine Management Sensors Where Required~Slip-Fit Collector~Catalytic Converter Must Be Relocated~Long Tube Header
- Long Tube Header; 1-3/4 in. Tubing Dia.; 3 in. Collector Dia.; Includes Gaskets And Hardware; Black Coating For Pre-Use Protection Only;
- Long Tube Header
- Product Attributes:
- Tube Diameter: 1.750 In.
- Application: Automotive
- Coated Finish: Black
- Port Shape: N/a
- Engine Make/Size:
- Chevy 4.8l
- Chevy 5.3l (vortec)
- Chevy 6.0l
- Tube Direction: N/a
-
Features:
- Plasma Cut CNC-Machined 3/8 in. Thick Head Flanges
- 16-Gauge Mandrel-Bent Mild Steel Tubing
- Matched To Exhaust Port Profile For Best Seal And Flow
- Tubes Enter Collector In Proper Firing Order For Max Scavenging
- Includes Gaskets/Hardware/Installation Instructions
- Combination Ease Of Installation/Fit/Maximum Performance Gain
- Connects Without Hassle To The Stock Y-Pipe On Most Models
- Custom Engineered for Racetrack Performance and Sound
- Black Paint Coating For Pre-Use Protection Only
- Three Year Limited Warranty
- Made In The USA
- Manufactured using mandrel-bent, 16-gauge mild steel tubing and port-matched, CNC-machined, 3/8 in.-thick head flanges. They are designed for the best combination of ease of installation, fit and maximum performance gain for your vehicle. PaceSetter Performance Headers come with gaskets, hardware and installation instructions and are backed by a three year warranty. Refer to the warranty elsewhere in this catalog. PaceSetter Performance Headers are available in raw steel or optional ARMOR*Coat, a polished, 2000 F metallic ceramic coating. Raw steel headers are delivered with a black coating applied at the factory for pre-installation protection only. It burns off on first use. ARMOR*Coat wont discolor like paint, chrome or even stainless steel, reduces underhood temperatures, helps the header resist rust and corrosion and is easy to keep clean. The coating itself is guaranteed not to chip, peel or flake for three years.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- 1-3/4 in. Tubing Dia.; 3 in. Collector Dia.; Includes Gaskets And Hardware; Black Coating For Pre-Use Protection Only;Not Legal For Sale Or Use In NY on California Emissions Vehicles Use With Y-Pipes 82-1176; 82-1176 Will Not Fit 6.0L~Hook Ups For Smog And Engine Management Sensors Where Required~Slip-Fit Collector~Catalytic Converter Must Be Relocated~Long Tube Header
- Long Tube Header; 1-3/4 in. Tubing Dia.; 3 in. Collector Dia.; Includes Gaskets And Hardware; Black Coating For Pre-Use Protection Only;
- Long Tube Header
- Product Attributes:
- Tube Diameter: 1.750 In.
- Application: Automotive
- Coated Finish: Black
- Port Shape: N/a
- Engine Make/Size:
- Chevy 4.8l
- Chevy 5.3l (vortec)
- Chevy 6.0l
- Tube Direction: N/a
-
Features:
- Plasma Cut CNC-Machined 3/8 in. Thick Head Flanges
- 16-Gauge Mandrel-Bent Mild Steel Tubing
- Matched To Exhaust Port Profile For Best Seal And Flow
- Tubes Enter Collector In Proper Firing Order For Max Scavenging
- Includes Gaskets/Hardware/Installation Instructions
- Combination Ease Of Installation/Fit/Maximum Performance Gain
- Connects Without Hassle To The Stock Y-Pipe On Most Models
- Custom Engineered for Racetrack Performance and Sound
- Black Paint Coating For Pre-Use Protection Only
- Three Year Limited Warranty
- Made In The USA
- Manufactured using mandrel-bent, 16-gauge mild steel tubing and port-matched, CNC-machined, 3/8 in.-thick head flanges. They are designed for the best combination of ease of installation, fit and maximum performance gain for your vehicle. PaceSetter Performance Headers come with gaskets, hardware and installation instructions and are backed by a three year warranty. Refer to the warranty elsewhere in this catalog. PaceSetter Performance Headers are available in raw steel or optional ARMOR*Coat, a polished, 2000 F metallic ceramic coating. Raw steel headers are delivered with a black coating applied at the factory for pre-installation protection only. It burns off on first use. ARMOR*Coat wont discolor like paint, chrome or even stainless steel, reduces underhood temperatures, helps the header resist rust and corrosion and is easy to keep clean. The coating itself is guaranteed not to chip, peel or flake for three years.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Suburban 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 50 products
Loading...