2012 Chevrolet Corvette Exhaust Parts
Choose your Part Name for your 2012 Chevrolet Corvette
Image
Product
Price
- Axle-Back
- Dual Rear Exit; 2.5 in. Dia.; Includes Muffler/Pipes/Clamps/Dual 4.5 in. Black PVD Pro-Series Tips
- 2.5in. Axle-Back Dual Rear Exit with Twin 4.5in. Black PVD Pro-Series Tips
- Xtreme Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Dual Rear
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Dual Walled Black PVD Stainless Steel Tips
- Flows 35 Percent Better Than Stock
- Kit Replaces PN 14959
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | LS9 | 8 Cyl 6.2L | ZR1 | T | 376 |
- Axle-Back Exhaust System - S-Type ll
- S-Type II Axle-Back Exhaust System 2009-2013 Chevrolet Corvette (C6) 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
- Axle-Back Exhaust System - S-Type ll - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Quad Center Rear Exit
- Title Extended: C6 Corvette 2009-2013 Axle-back Exhaust System S-type Ii Part # 11811
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.000 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 4 In.
- Off Road Use Only: No
- System Type: Axle Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- S-Type II sound level
- System will fit vehicles with and without NPP valves
- See below for additional Product Features & Benefits
- BORLA system does NOT contain NPP valves
- The S-Type II systems use the latest muffler design to eliminate sound frequencies are often associated with resonance or drone. System features 4" polished T-304 stainless steel tips. BORLA Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Base | 376 |
- 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last]
- Header Bolt Set; 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last];
- Header Bolt Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Engine Make/Size:
- Chevy 4.8l
- Chevy 4.8l (vortec)
- Chevy 5.0l
- Chevy 5.3l
- Chevy 5.3l (vortec)
- Chevy 5.7l (vortec)
- Chevy 6.0l (vortec)
-
Features:
- Designed For Quick Easy Installation
- Compact Bolt Head And Flange
- Black Oxide Finish Resists Corrosion
- Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal - your typical header flange. Includes twelve (12) M8 - 1.25 x 25mm header bolts.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Chevrolet Corvette |
- Axle-Back
- Dual Rear Exit; 2.5 in. Dia.; Includes Muffler/Pipes/Clamps/Dual 4.5 in. Black PVD Pro-Series Tips
- 2.5in. Axle-Back Dual Rear Exit with Twin 4.5in. Black PVD Pro-Series Tips
- Xtreme Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Dual Rear
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Dual Walled Black PVD Stainless Steel Tips
- Flows 35 Percent Better Than Stock
- Kit Replaces PN 14959
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | LS9 | 8 Cyl 6.2L | ZR1 | T | 376 |
- 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last]
- Header Bolt Set; 12 piece M8-1.25 x 25mm; Black Oxide; [Available While Supplies Last];
- Header Bolt Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Engine Make/Size:
- Chevy 4.8l
- Chevy 4.8l (vortec)
- Chevy 5.0l
- Chevy 5.3l
- Chevy 5.3l (vortec)
- Chevy 5.7l (vortec)
- Chevy 6.0l (vortec)
-
Features:
- Designed For Quick Easy Installation
- Compact Bolt Head And Flange
- Black Oxide Finish Resists Corrosion
- Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal - your typical header flange. Includes twelve (12) M8 - 1.25 x 25mm header bolts.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Chevrolet Corvette |
- Hardware-Clamp 2 1/2in. Narrow Band-Stain.
- Size 2.5 in.; 430 Bright Stainless Steel 2 1/2 in. Band
- Hardware-Clamp
- Walker Exhaust Band Clamp
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
- Exhaust Manifold Gasket Set
- Manifold Bolts Not Included
- FEL-PRO MS 92467 Exhaust Manifold Gasket Set for Chevrolet Silverado 1500
- Product Attributes:
- Grade Type: Premium
- Bolt Hole Quantity: 6
- Configuration: Multi Piece
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
111060401, 18813, 852354, AMS3711, MS16124
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | W | Naturally Aspirated | 376 |
- Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Body Width: 4.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | Front Right | 8 Cyl 6.2L | Grand Sport | 376 |
- Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Body Width: 4.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | Front Left | 8 Cyl 6.2L | Grand Sport | 376 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2012 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Naturally Aspirated | 376 |
Showing 1 - 10 of 26 products
Loading...