2013 Ford Mustang Exhaust Parts
Choose your Part Name for your 2013 Ford Mustang
Image
Product
Price
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DFMXV03.7VDT ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Mustang | V | 3726 | Left | 6 Cyl 3.7L | 227 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number DFMXV03.7VDT ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Mustang | V | 3726 | Right | 6 Cyl 3.7L | 227 |
- 2.75 in.; For Use w/Rear Section And X Pipe; Qty. 2; T-304 Stainless Steel;50 State Legal / California Emissions Compliant
- Overaxle Pipe; 2.75 in.; For Use w/Rear Section And X Pipe; Qty. 2; T-304 Stainless Steel;
- Overaxle Pipe
- Product Attributes:
- Tube Diameter: 2.750 In.
- Bend Angle: N/a
- WARNING CA Proposition 65: Yes
- Center Line Radius: N/a
- Inlet Inside Diameter: 2.750 In.
- Leg/Straight Length: N/a
- Pipe Material: Stainless Steel
- Gauge: Oem
-
Features:
- Use w/Rear Section/X Pipe For Complete Cat-Back System
- Million Mile Warranty
- These over axle pipes are recommended to be used with the Borla Rear Section and X Pipe to complete a cat-back system. ...
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT | 302 |
- Exhaust Manifold Bolt Set
- Exhaust Manifold Bolt Set Set services one exhaust manifold Replacement recommended (8 Studs) M10x1.25x62.75mm (8 Nuts) M10x1.25
- FEL-PRO ES 75125 Exhaust Manifold Bolt Set
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | 302 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Attach RH and LH Exhaust Manifold to Cylinder Head
- M8 Stainless Steel
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 5812 | 8 Cyl 5.8L | 355 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | 227 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | 227 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Use with Nut W714870S430
- M10 Fine Thread Nut
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | 302 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Use with Stud W714869S431
- M10 Fine Thread Nut
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | 302 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Exhaust Manifold Nut - Use with Stud W714869S431
- M10 Fine Thread Nut
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | 302 |
Showing 1 - 10 of 78 products
Loading...