2019 Honda Ridgeline Exhaust Parts
Choose your Part Name for your 2019 Honda Ridgeline
Image
Product
Price
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Ridgeline | Center |
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Ridgeline |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Rear, EXHAUST CROSSOVER GASKET
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Honda Ridgeline |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Honda Ridgeline | Center |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51205
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Honda Ridgeline | V | 3471 | 6 Cyl 3.5L | - |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Muffler (Rear) Body Height: 4
- Muffler (Front) Body Height: 5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Muffler (Rear) Body Width: 4
- Exhaust Tip Length: 11
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 18
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2017-2020 Honda Ridgeline Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2017-2020 Honda Ridgeline with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Ridgeline exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Ridgeline's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19364 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19364 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Honda Ridgeline | V | 3471 | 6 Cyl 3.5L | - |
- OEM Grade Manifold Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Manifold Catalytic Converter
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow Oem Grade Federal / Epa Compliant Manifold Catalytic Converter 51898
- Converter Body Length: 6.5
- Type: One-piece
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51898. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2022 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18280-5MJ-A00 and 18280-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
18280-5MJ-A00, 18280-RLV-A00, 18280-RN0-A20, 18290-5G0-A00, 18290-5G1-305, 18290-5G1-L00, 18290-R70-A00, 18290-R70-A01, 18290-R70-A02, 18290-R70-A10, 18290-R71-A00, 18290-R9P-A00, 18290-R9P-H00, 18290-RBR-A00, 18290-RV0-A00, 18290-RYE-A10, 182905G0A00, 182905G1L00...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Honda Ridgeline | V | 3471 | Rear | 6 Cyl 3.5L | - |
- Street Series Stainless Cat-Back System
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Muffler Body Length Position Front: 18
- Exhaust Tip Quantity: 1
- Muffler (Rear) Body Height: 4
- Muffler (Front) Body Height: 5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Muffler (Rear) Body Width: 4
- Exhaust Tip Length: 11
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Height Position Rear: 4
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler Body Length Position Rear: 14
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler (Front) Body Length: 18
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Title: Magnaflow 2017-2020 Honda Ridgeline Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Muffler Body Width Position Rear: 4
- Muffler Body Height Position Front: 5
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2017-2020 Honda Ridgeline Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2017-2020 Honda Ridgeline with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Ridgeline exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Ridgeline's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19364 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19364 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Honda Ridgeline | V | 3471 | 6 Cyl 3.5L | - |
- OEM Grade Manifold Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Manifold Catalytic Converter
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow Oem Grade Federal / Epa Compliant Manifold Catalytic Converter 51893
- Converter Body Length: 6.25
- Type: One-piece
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51893. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2022 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18180-5MJ-A00 and 18180-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
18180-5MJ-A00, 18180-RLV-A00, 18180-RN0-A20, 18190-5G0-A00, 18190-5G1-305, 18190-5G1-L00, 18190-R70-A00, 18190-R70-A10, 18190-R70-A11, 18190-R70-A20, 18190-R71-A00, 18190-R8A-A00, 18190-R9P-A00, 18190-R9P-H00, 18190-RBR-A00, 18190-RYE-A10, 181905G0A00, 181905G1L00...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Honda Ridgeline | V | 3471 | Front | 6 Cyl 3.5L | - |
Showing 1 - 10 of 19 products
Loading...