2020 Ford Expedition Exhaust Parts
Choose your Part Name for your 2020 Ford Expedition
Image
Product
Price
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ford Expedition |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- M10
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ford Expedition |
- 3in. Cat-Back. Single Side Exit. T304
- For Vehicles Equipped With Single Exhaust. Does not fit Vehicles Equipped With Dual Exhaust.
- 3in. Cat-Back. Single Side Exit. T304 Stainless Steel.
- MBRP Armor Pro Cat-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Tour Profile
- Exhaust Tip Length: 10
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Inlet Type: Bolt-on
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 51
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Oval
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 Stainless Steel Construction. Bolt-on Installation. Increased Flow by 51%. Moderate Tone. MBRP Signature Styling and Sound.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|
| 2020 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | XLT | EcoBoost | 213 |
- EXHAUST MANIFOLD PASSENGER SIDE FORD F-150 ECOBOOST 2017-2020 3.5L
- EXHAUST MANIFOLD PASSENGER SIDE FORD F-150 3.5L ECOBOOST 2017-2020
- Exhaust Manifold Passenger Side
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Gasoline
- Suggested Product: 1061718
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Uniform wall thickness casting
- Extended studs and spacers (15mm Longer)
- Two (2) additional mounting holes per manifold
- 16% increase in flow capability
- Gaskets and hardware included
- Receive performance and durability with our enhanced Ford 3.5L EcoBoost exhaust manifolds, specifically designed for the 2017-2020 model years. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating two additional bolt holes and by utilizing extended fasteners and spacers to better withstand thermal expansion. In addition, we've engineered them to flow 16% better than the OEM to increase efficiency. Crafted with precision, our BD Manifolds boast a robust, thicker design. They are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- EXHAUST MANIFOLD KIT FORD ECOBOOST 2017-2020 3.5L
- EXHAUST MANIFOLD KIT FORD F-150 3.5L ECOBOOST 2017-2020
- Exhaust Manifold Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Gasoline
- Suggested Product: 1061718
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Uniform wall thickness casting
- Extended studs and spacers (15mm Longer)
- Two (2) additional mounting holes per manifold
- 16% increase in flow capability
- Gaskets and hardware included
- Receive performance and durability with our enhanced Ford 3.5L EcoBoost exhaust manifolds, specifically designed for the 2017-2020 model years. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating two additional bolt holes and by utilizing extended fasteners and spacers to better withstand thermal expansion. In addition, we've engineered them to flow 16% better than the OEM to increase efficiency. Crafted with precision, our BD Manifolds boast a robust, thicker design. They are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- EXHAUST MANIFOLD PASSENGER SIDE FORD F-150 ECOBOOST 2017-2020 3.5L
- EXHAUST MANIFOLD PASSENGER SIDE FORD F-150 3.5L ECOBOOST 2017-2020
- Exhaust Manifold Driver Side
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Gasoline
- Suggested Product: 1061718
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Uniform wall thickness casting
- Extended studs and spacers (15mm Longer)
- Two (2) additional mounting holes per manifold
- 16% increase in flow capability
- Gaskets and hardware included
- Receive performance and durability with our enhanced Ford 3.5L EcoBoost exhaust manifolds, specifically designed for the 2017-2020 model years. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating two additional bolt holes and by utilizing extended fasteners and spacers to better withstand thermal expansion. In addition, we've engineered them to flow 16% better than the OEM to increase efficiency. Crafted with precision, our BD Manifolds boast a robust, thicker design. They are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- Single Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Exit Style: Single Passenger Side Rear
- Tip Type: Welded;double Wall;angle Cut;rolled Edge
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2020 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- 3in. Cat-Back. Single Side Exit. AL
- For Vehicles Equipped With Single Exhaust. Does not fit Vehicles Equipped With Dual Exhaust.
- 3in. Cat-Back. Single Side Exit. Aluminized Steel.
- MBRP Armor Lite Cat-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Tour Profile
- Exhaust Tip Length: 10
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Inlet Type: Bolt-on
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 51
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Oval
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 4
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. Increased flow by 51%. Moderate Tone. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|
| 2020 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | XLT | EcoBoost | 213 |
Showing 1 - 8 of 8 products
Loading...