2023 Chevrolet Suburban Exhaust Parts
Choose your Part Name for your 2023 Chevrolet Suburban
Image
Product
Price
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 4
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280211
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280211. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2019-2023 GMC Sierra 1500, 2019-2023 Chevrolet Silverado 1500, and more, this direct-fit catalytic converter also interchanges with OE parts 84655075 and 23241308, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
23241308, 84520355, 84557806, 84655075
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 6162 | 8 Cyl 6.2L | 376 |
- OEM Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless
- Clamps Included: Yes
- Prop 65 Y/N: No
- Sensor Port Count: 4
- Title: Magnaflow Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter 280656
- California Air Resources Board (CARB) Certified: No
-
Features:
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280656. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2019-2023 Chevrolet Silverado 1500, 2019-2023 GMC Sierra 1500, and more, this direct-fit catalytic converter also interchanges with OE parts 19420299 and 23241309, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
19420299, 23241309, 84520354, 84557805, 84655074
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 5328 | 8 Cyl 5.3L | 325 |
- MBRP 3 in. Cat-Back, 2.5in. Dual Split Rear Exit, AL
- Replaces Factory Through Bumper
- MBRP S5059AL 3 in. Cat-Back, 2.5in. Dual Split Rear Exit Exhaust System, Aluminized Steel with Quad Tips.
- MBRP Armor Lite Cat-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18.9
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 9.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- UPS Able: Yes
- Muffler Body Diameter: 6
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Rear Quad Outlet
- Muffler Body Width: 6
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 64
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy-Gauged Aluminized Steel. Mandrel Bent Tubing For Smooth Exhaust Flow. Utilizes OEM Hanger Locations. Quad 4 Inch OD Tips. Bolt on Installation. Moderate Exhaust Tone. Up to 64 Percent Flow Increase.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 6162 | 8 Cyl 6.2L | Z71 | 376 |
- MBRP 3 inch Cat-Back, Single Side Exit, T304.
- MBRP S5061304 3 inch Cat-Back Exhaust, Single Side Exit, T304 Stainless Steel.
- MBRP Armor Pro Cat-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 13
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4.9
- Profile: Tour Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 9.5
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 45
- Muffler Body Material: T304 Stainless Steel
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Bolt-on installation. Smooth mandrel bent tubing. Up to 45 percent flow increase. Utilizes Helmholtz technology. Enhanced mellow exhaust tone. Mirror polished tip included. Durable T304 stainless steel construction.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 5328 | 8 Cyl 5.3L | Z71 | 325 |
- MBRP 3 in. Cat-Back, 2.5in. Dual Split Rear Exit, T304 with CF Tips
- Replaces Factory Through Bumper
- MBRP S50593CF 3 in. Cat-Back, 2.5in. Dual Split Rear Exit Exhaust System, T304 with Quad Carbon Fiber Tips.
- MBRP Armor Pro Cat-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material:
- Carbon Fiber
- Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18.9
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 9.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- UPS Able: Yes
- Muffler Body Diameter: 6
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Rear Quad Outlet
- Muffler Body Width: 6
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 64
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 Stainless Steel Construction. Mandrel Bent Tubing For Smooth Exhaust Flow. Utilizes OEM Hanger Locations. Quad 4 Inch OD Carbon Fiber Tips. Bolt on Installation. Moderate Exhaust Tone. Up to 64 Percent Flow Increase.
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 6162 | 8 Cyl 6.2L | Z71 | 376 |
- Street Series Black Chrome Cat-Back System
- Quad Split Rear Exit
- Magnaflow Street Series Black Chrome Cat-Back System
- Street Series Black Chrome Tips Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 4
- Muffler (Front) Type: Straight-through
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 3
- Muffler (Center) Body Height: 5
- Clamps Included: Yes
- Muffler (Rear) Body Width: 4
- Muffler (Rear) Type: Tuned Chamber
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Front) Body Width: 11
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Quad Split Rear
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 11
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Black Chrome
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Chevrolet Suburban/GMC Yukon XL Street Series Cat-Back Performance Exhaust System #19543 drastically improves your 2021-2024 Chevrolet Suburban (Premier/High Country) or GMC Yukon XL Denali by enabling MagnaFlow’s deep signature sound and dyno proven performance to work their magic in improving your driving experience while keeping interior noise in check. Noise control is possible thanks to MagnaFlow’s No Drone Technology (NDT), which uses quarter-wave passive noise cancellation tuned to the specific droning frequency of your Chevrolet Suburban (Premier/High Country) or GMC Yukon XL Denali in order to eliminate exhaust drone. NDT was designed to take the most popular bolt-on modifications into consideration. This cat-back exhaust kit features 3” diameter piping, straight-through muffler, quarter-wave resonators, quad split rear exit and black chrome-finished 4” tips for an extra sporty appearance. The exhaust system is made entirely of stainless steel and was designed from the beginning with weight and ground clearance in mind to improve durability and maintain your 2021-2024 Chevrolet Suburban/GMC Yukon XL’s utility. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation. MagnaFlow stands by the reliability of their products with a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 6162 | 8 Cyl 6.2L | 376 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 6162 | 8 Cyl 6.2L | 376 |
- 3in. Cat-Back. Single Side Exit. AL
- MBRP S5061AL 3 inch Cat-Back Exhaust, Single Side Exit, Aluminized Steel.
- MBRP Armor Lite Cat-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 13
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4.9
- Profile: Tour Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 9.5
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Flow Increase (%): 45
- Muffler Body Material: Aluminized Steel
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 4
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Bolt-on installation. Smooth mandrel bent tubing. Up to 45 percent flow increase. Utilizes Helmholtz technology. Enhanced mellow exhaust tone. Mirror polished tip included. Heavy-gauged aluminized steel.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Chevrolet Suburban | V | 5328 | 8 Cyl 5.3L | Z71 | 325 |
Showing 1 - 8 of 8 products
Loading...