1995 Honda Civic del Sol HVAC Parts
Choose your Part Name for your 1995 Honda Civic del Sol
Image
Product
Price
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 191
- 7.5
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .62
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10801, 14-2642-8, 1405555M05, 1405640F00, 14108S, 15984158, 1626138010, 18801, 24500341, 25515149, 25524572, 25535149, 3034, 3041, 43029, 63029, 642218, 642230...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1995 - Honda Civic del Sol | L | 1588 | Heater To Valve | GAS | 4 Cyl 1.6L | 98 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- New with Clutch
- with OE Compressor = Sanden TRS090.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Honda Civic del Sol |
- This assembly includes the fan motor, fan blade, and fan shroud. This is the fan that is controlled by the air cond. system and not the fan that is controlled by the coolant temp thermo-fan switch. The OE-style motor is also available separately as part #80151-SR3-013.
- Assembly with Blade
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Honda Civic del Sol |
- Molded
- Inlet - Engine to Valve - This listing applies to Civic del Sol VTEC models with the B16A3 (DOHC) engine.
- Inlet - Engine to Valve
Additional Fitment Information:
| Vehicle | Cylinder Head Type |
|---|---|
| 1995 - Honda Civic del Sol | DOHC |
- Molded
- Inlet - Engine to Valve
- Inlet - Engine to Valve
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Honda Civic del Sol | L | 1493 | 4 Cyl 1.5L | - |
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Honda Civic del Sol |
- Small I.D. Molded
- Inlet - Valve to Heater
- Trim-to-Fit
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Honda Civic del Sol |
- Small I.D. Molded
- Outlet - Heater to Engine
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Honda Civic del Sol | L | 1493 | 4 Cyl 1.5L | - |
- Small I.D. Molded
- Inlet - Engine to Valve
- Trim-to-Fit
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Honda Civic del Sol | L | 1493 | 4 Cyl 1.5L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1995 - Honda Civic del Sol | L | 1588 | Valve-2 To Engine | GAS | 4 Cyl 1.6L | Si | 98 |
Showing 1 - 10 of 13 products
Loading...