1996 Ford Club Wagon HVAC Parts
Choose your Part Name for your 1996 Ford Club Wagon
Image
Product
Price
- W/Aux. Heater; Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Ford Club Wagon | V | 5753 | Pipe-1 To Water Pump | GAS | 8 Cyl 5.8L | 351 |
- W/Aux. Heater; Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Ford Club Wagon | V | 5753 | Heater To Tee-2 | GAS | 8 Cyl 5.8L | 351 |
- W/Aux. Heater; Protective sleeve required; Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Ford Club Wagon | V | 5753 | Heater To Tee-1 | GAS | 8 Cyl 5.8L | 351 |
- Cut to Length, 33"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Ford Club Wagon | V | 5753 | Pipe To Auxiliary Heater Pipe | GAS | 8 Cyl 5.8L | 351 |
- Cut to Length, 33"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Ford Club Wagon | V | 5753 | Auxiliary Heater To Pipe | GAS | 8 Cyl 5.8L | 351 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10030, 10239523, 10354454, 12553625, 14002S, 1405569A06, 1405616E10, 1405632F12, 14056V5022, 1628142020, 1628236030, 1628542010, 1629142020, 1635206, 1635221, 18030, 1J0122447BR, 24504912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | Trans. Speed | CID |
|---|---|---|---|---|---|---|---|---|
| 1996 - Ford Club Wagon | V | 5753 | Automatic | Tee To Intake Manifold | GAS | 8 Cyl 5.8L | 4 | 351 |
- HVAC Blower Motor Resistor For Ford E-350 Super Duty E-250 F-150 F-250 F-350 HD
- with Air Condiitoning without Connector
- Mpulse HVAC Blower Motor Resistor SEN-2BMR0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline E-150 Ranger HD Club Wagon Bronco Aerostar Explorer Windstar Mazda II B4000 B3000 B2300 E-450
- Mpulse
- Product Attributes:
- WebNameEbay4: For Ford E-350 Super Duty E-250 F-150 Hd Hvac Blower Motor Resistor Sen-2bmr0284
- ComponentsSummaryRegularWithBrands: Mpulse Hvac Blower Motor Resistor
- ComponentsSummaryShort: Hvac Blower Motor Resistor
- ComponentsSummaryLongWithBrands: 1x Mpulse Hvac Blower Motor Resistor
- WebNamePlain: Mpulse Hvac Blower Motor Resistor Sen-2bmr0284
- ComponentsSummaryShortWithBrands: Mpulse Hvac Blower Motor Resistor
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Hvac Blower Motor Resistor
- WebNameLong: Mpulse Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline E-150 Ranger Hd Club Wagon Bronco Aerostar Explorer Windstar Mazda Ii B4000 B3000 B2300 E-450 Navajo F-700 F-53 Motorhome Chassis F-800 F-600 F-200
- WebNameShort: Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline
- ComponentsSummaryRegular: Hvac Blower Motor Resistor
- WebNameRegular: Mpulse Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Econoline E-150 Ranger Hd Club Wagon Bronco Aerostar Explorer Windstar Mazda Ii B4000 B3000 B2300 E-450
- WebNameEbay2: Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150
- WebNameEbay3: Hvac Blower Motor Resistor Sen-2bmr0284 For Ford E-350 Super Duty E-250 F-150 Hd
- WebNameEbay: Hvac Blower Motor Resistor For Ford E-350 Super Duty E-250 F-150 F-250 F-350 Hd
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 3A1124 RU1013 2BMR0284 BR223 4C2Z-19A706-BA E7TZ-19A706-A RU318
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2BMR0284, 3A1124, 4C2Z-19A706-BA, BR223, E7TZ-19A706-A, N/A, RU1013, RU318
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Ford Club Wagon | Rear |
- Flanged Vented CW Blower Motor w/o Wheel
- w/o Wheel
- Flanged Vented CW Blower Motor w/o Wheel
- Blower Motor
- Product Attributes:
- Motor Dia. MM: 82.55
- Rotation: Cw
- Shaft Shape: D-shaped
- Connector Gender: Female
- Vented?: Vented
- New or Reman: New
- Wheel Dia. IN: Yes
- Wheel?: W/o Wheel
- Motor Dia. IN: 3.250
- Flanged?: Yes
- Motor Length MM: 112.72
- Motor Length IN: 4.44
- Description: Blower Motor /flanged
- Connector Qty: 1
- O.E. Replacement?: Yes
- Shaft Length IN: 1.250
- Type: Blower Motors
- Material: Metal
-
Features:
- Meets or exceeds OE design and performance
- Windings meet or exceed OEM specifications
- Magnetic size and properties compare or exceed OEM
- Motor RPM equivalent to or exceeds OEM motor
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
010409, 010416, 010419, 02494, 100076, 1011003, 10409, 10416, 10419, 11135402V, 1504010, 1580599, 158866, 19189100, 20267, 203284, 209230, 2311270...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Ford Club Wagon | Front |
- Suction Line Hose Assembly
- Suction Line Factory Installed AC
- Suction Line Hose Assembly
- Hose Assembly
- Product Attributes:
- Switch Included?: Not Included
- Service Port?: W/o Service Port
- O-Ring A Quantity: 1
- Refrigerant Type: R134a
- Suction End Type: Springlock
- Gasket / Seals?: Included
- O-Ring B Number/Desc: 24670 / Green O-ring
- Muffler?: W/o Muffler
- O-Ring B Quantity: 6
- Description: Hose Assemblies
- O-Ring A Number/Desc: 24220 / Spring
- O.E. Replacement?: Yes
- Switch Port?: W/o Switch Port
- Bracket?: W/o Bracket
- Componet Type: Suction Line
- Material: Aluminum / Rubber
-
Features:
- Application specific design
- Contains gaskets, o-rings, or seals to properly replace the product
- Crimp fitting connection
- All hoses are constructed with double wall barrier hose compatible with R134A or R12
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
201564, 55564, 607432, 6C2Z19867FA, 785390, 990241, A05564, CC2Z19867A, F4UZ19867B, F6UZ19867BA, HA111722, HA111722C, T55564, XC2Z19867AA, YF3260, YF37262
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Ford Club Wagon | Rear |
Showing 1 - 9 of 9 products
Loading...