1998 Toyota Camry HVAC Parts
Choose your Part Name for your 1998 Toyota Camry
A/C Compressor
A/C Compressor Clutch Coil
A/C Compressor Clutch Hub
A/C Condenser
A/C Evaporator Core
A/C Expansion Valve
A/C Line O-Ring Kit
A/C Refrigerant Line Clamp
A/C Refrigerant Liquid Hose
A/C Service Valve
Ambient Air Temperature Sensor
HVAC Blower Motor Control Module
HVAC Blower Motor Resistor
HVAC Heater Control Switch
HVAC Heater Core
HVAC Heater Core O-Ring
HVAC Heater Hose
HVAC Pressure Switch
HVAC Servo
Image
Product
Price
- Liquid Line Hose Assembly w/o Orifice Tube
- w/o Orifice Tube Condenser to Receiver Drier
- Liquid Line Hose Assembly w/o Orifice Tube
- Hose Assembly
- Product Attributes:
- Liquid Line Style: Captive O-ring
- Orifice Tube?: W/ Orifice Tube
- Service Port?: W/ Service Port
- O-Ring A Quantity: 2
- Refrigerant Type: R134a
- Suction End Type: P-nut Fitting
- Lqd Line Thrd Size: M16 X 1.5
- Service Port Size: 16 Mm
- Gasket / Seals?: Included
- Description: Hose Assemblies
- O-Ring A Number/Desc: 24611 / Green O-ring
- O.E. Replacement?: Yes
- Switch Port?: W/o Switch Port
- Bracket?: W/o Bracket
- Svc Port High Side: High Side
- Type: Liquid Line
- Material: Aluminum
-
Features:
- Crimp fitting connection
- All hoses are constructed with double wall barrier hose compatible with R134A or R12
- Application specific design
- Contains gaskets, o-rings, or seasl to properly replace the product
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
212049, 4813026, 65642, 791204, 801150, 8871606110, A83818, HA111418C
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Toyota Camry |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .5
- 13
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
1319350G01, 14055ET110, 140561M200, 1405684A10, 14242S, 1626474101, 1626774081, 1628250030, 1628250070, 19508689010, 19508PB3000, 19522PV0000, 213067S010, 28460, 3441140, 52003882, 5862024010, 63706...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Toyota Camry | L | 2164 | Pipe-2 To Oil Cooler | GAS | 4 Cyl 2.2L | - |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .5
- 13
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Toyota Camry | L | 2164 | Oil Cooler To Pipe-3 | GAS | 4 Cyl 2.2L | - |
- Air Conditioning Condenser
- DENSO is the OE supplier for this vehicle. OE
- Air Conditioning Condenser, OE Quality
- A/C Condenser
- Product Attributes:
- Includes Drier: No
- Mounting Hardware Included: No
- Like all DENSO First Time Fit® A/C components, DENSO condensers are designed and manufactured to integrate seamlessly with the vehicle's original air conditioning system.DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Serpentine condenser styles are offered to provide the optimum configuration for each application.
This Part Fits the Following OEM/Substitute Numbers:
10400, 1040141, 15-62406, 24-31119, 40677, 447700-8880, 4770513, 4931, 7-4931, 7014931, 88460-06050, CF20088, P40141S
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Toyota Camry |
- First Time Fit
- Automatic Temperature Controls
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Toyota Camry |
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Toyota Camry |
- New with Clutch
- Remanufactured
with Clutch
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Toyota Camry | V | 2995 | 6 Cyl 3.0L | - |
- New with Clutch
- JAPAN MADE MODELS
Remanufactured
w/o Clutch
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Toyota Camry | V | 2995 | 6 Cyl 3.0L | - |
- Production: 05/01/1998-07/31/1998, with Models Made in Japan
with Air Conditioning
Additional Fitment Information:
| Vehicle | Sub Model | Prod. Date Range |
|---|---|---|
| 1998 - Toyota Camry | CE | Fr:05-01-98 To:07-31-98 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .31
- Material: Epdm
- End 2 Inside Diameter: .31
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0935270131600, 10020, 10036781, 12637185, 14001S, 1405557Y12, 14055D4200, 140560B000, 140560B001, 140560S310, 1405610V11, 1405630P21, 1405630P24, 1405630R16, 1405640F04, 1405640F12, 1405653J07, 1405653J09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Toyota Camry | V | 2995 | Pipe To Throttle Body | GAS | 6 Cyl 3.0L | - |
Showing 1 - 10 of 35 products
Loading...