2000 Ford Contour HVAC Parts
Choose your Part Name for your 2000 Ford Contour
Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 213
- 8.4
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
20376S, 22448, 2S7Z 8A567 AA, 2S7Z 8A567 AD, 4F22 8261 AA, 62732, 71728, 71984, 72385, 9081, B71728, B71984, B72385, F5RZ 8A567 A, GY0115536, KH337, KM-4392, XF22 8291 AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Contour | V | 2450 | Water Pump Inlet | GAS | 6 Cyl 2.5L | 155 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Contour | V | 2450 | Reservoir To Radiator | GAS | 6 Cyl 2.5L | 155 |
- Includes Motor, Harness, Seal, Retainer, and Gasket
- - with Wheel
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Contour |
- Required On Some Older Models When Switching From Rounded To Oval Plug
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Contour |
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Contour |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- New with Clutch
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Contour | L | 1989 | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Contour | L | 1989 | 4 Cyl 2.0L | 121 |
- HVAC Blower Motor Resistor For Ford Focus Transit Connect Mercury Contour Couga
- without Connector
- Mpulse HVAC Blower Motor Resistor SEN-2BMR0249 For Ford Focus Transit Connect Mercury Contour Cougar Mystique without Connector
- Mpulse
- Product Attributes:
- WebNameEbay4: For Ford Focus Transit Connect Mercury Hvac Blower Motor Resistor Sen-2bmr0249
- ComponentsSummaryRegularWithBrands: Mpulse Hvac Blower Motor Resistor
- ComponentsSummaryShort: Hvac Blower Motor Resistor
- ComponentsSummaryLongWithBrands: 1x Mpulse Hvac Blower Motor Resistor
- WebNamePlain: Mpulse Hvac Blower Motor Resistor Sen-2bmr0249
- ComponentsSummaryShortWithBrands: Mpulse Hvac Blower Motor Resistor
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Hvac Blower Motor Resistor
- WebNameLong: Mpulse Hvac Blower Motor Resistor Sen-2bmr0249 For Ford Focus Transit Connect Mercury Contour Cougar Mystique Without Connector
- WebNameShort: Hvac Blower Motor Resistor Sen-2bmr0249 For Ford Focus Transit Connect Mercury Contour Cougar
- ComponentsSummaryRegular: Hvac Blower Motor Resistor
- WebNameRegular: Mpulse Hvac Blower Motor Resistor Sen-2bmr0249 For Ford Focus Transit Connect Mercury Contour Cougar Mystique Without Connector
- WebNameEbay2: Hvac Blower Motor Resistor Sen-2bmr0249 For Ford Focus Transit Connect Cougar
- WebNameEbay3: Hvac Blower Motor Resistor Sen-2bmr0249 For Ford Focus Transit Connect Mercury
- WebNameEbay: Hvac Blower Motor Resistor For Ford Focus Transit Connect Mercury Contour Cougar
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 4P1579 RU1120 2BMR0249 BR330 3M5Z-18591-BA F7RZ-18591-AA YS4Z-18591-AA YS4Z-18591-AB YS4Z-18591-BA RU427
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2BMR0249, 3M5Z-18591-BA, 4P1579, BR330, F7RZ-18591-AA, N/A, RU1120, RU427, YS4Z-18591-AA, YS4Z-18591-AB, YS4Z-18591-BA
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Contour |
Showing 1 - 8 of 8 products
Loading...