2000 Ford Windstar HVAC Parts
Choose your Part Name for your 2000 Ford Windstar
Image
Product
Price
- Engine Heater Hose Assembly
- Heater Outlet to Water Pump
- Product Attributes:
- Diámetro exterior del extremo de la manguera (2) (in): 0.7 In
- End 3 Inside Diameter: 0.6
- Diámetro exterior del extremo de la manguera (3) (in): 0.83 In.
- End 3 Attachment Type: Flared
- Diámetro exterior del extremo de la manguera (1) (in): 0,87in
- Tipo de fijación del extremo 3: Sobresaliente
- Protective Sleeve Attached:
- No
- Non
- End 1 Attachment Type:
- Flared
- Sobresaliente
- End 2 Inside Diameter: 0.49
- Clamps Included:
- No
- Non
- Coolant Hose Type:
- Branched
- Ramificado
- End 2 Attachment Type:
- Flared
- Sobresaliente
- Hose End (1) Outside Diameter (In): 0.87 In
- Color:
- Black/coated
- Negro/revestido
- Thermostatically Controlled:
- No
- Non
- Coolant Hose Heat Shield Included:
- No
- Non
- Hose End (3) Outside Diameter (In):
- 0.83 In
- 0.83 In.
- Contenidos del paquete: Conjunto De Manguera Del Calentador
- End 1 Inside Diameter: 0.76
- Hose End (2) Outside Diameter (In): 0.7 In
- Maximum Working Pressure: 100
- Material:
- Acero
- Steel
-
Features:
- Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
- This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
This Part Fits the Following OEM/Substitute Numbers:
HHA121, KGTE-6663, SK626210, XF2Z18663AA
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Windstar |
- Accumulator
- Accumulator
- Product Attributes:
- Service Port?: W/o Service Port
- O-Ring A Quantity: 2
- Outlet Fraction: 3/4
- Washer Type: Washer Not Included
- Meets / Exceeds OEM?: Yes
- Inlet Fraction: 3/4
- Length MM: 215.9
- Dia. MM: 88.9
- Length IN: 9.000
- Dia. IN: 3.500
- Mounting Hardware?: Not Included
- Description: Accumulators
- O-Ring A Number/Desc: 24642 / Green O-ring
- Switch Port?: W/o Switch Port
- Bracket?: W/o Bracket
- Type: Accumulator
- Material: Aluminum
-
Features:
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
- As a manufacturer in accumulator/filter driers, we offer quality units produced in a ISO/TS16949 & ISO14001 certified facility. State-of-the-art equipment and high quality materials ensure product integrity for long lasting performance.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
01466310, 0283023, 11183023, 1411627, 1510908, 161063, 161063D, 1710053, 19193686, 1AMAC83023, 210127, 2F2Z19C836A, 3709034, 3723512, 3947, 408577, 500140, 572555...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Windstar |
- NEW COMPRESSOR W/ CLUTCH
- OE recommended replacement part. OE-specified Oil included.
- New A/C Compressor
- A/C Compressor with Clutch - New
- Product Attributes:
- Refrigerant Type: R134a
- Pulley Belt Type: Serpentine
- Mounting Type: Bolt Tangent
- Clutch Maximum Diameter: 116.0
- As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. At DENSO, we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
000734, 010029, 10000537, 10029, 15-20704, 255430, 2607N, 274204, 35225, 4718127, 4F2Z19703AB, 57157, 58157, 618157, 638706, 6511464, 900290, F7DZ19703GB...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Windstar |
- W/Aux. Heater; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 191
- 7.5
- End 1 Inside Diameter:
- .72
- 18
- Material: Epdm
- End 2 Inside Diameter:
- .72
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11736, 140569E000, 14323S, 19130283, 19736, 22610689, 4596618AB, 64321, B91028
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Windstar | V | - | Heater To Tee-1 | GAS | 6 Cyl 3.8L | 232 |
- Cut to Length, 24"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Windstar | V | - | Auxiliary Heater To Pipe | GAS | 6 Cyl 3.8L | 232 |
- Rivet-Nylon Assortment-1/4 In.
- Package Quantity: 6 Packaging Type: Clamshell
- Product Attributes:
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 6 Remaches
- Material:
- Nailon
- Nylon
- Color:
-
Features:
- Comprehensive selection - Dorman offers a comprehensive line of quality nylon rivets for a range of applications, in a wide variety of sizes and styles
- Ensure fit - check product dimensions and styles to select the right assortment for your application
- Buy only what you need - conveniently packaged for any size automotive, commercial, industrial or household application
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Dorman offers a comprehensive line of quality nylon rivets ideal for a range of applications and in a wide variety of sizes and styles. Manufactured from durable materials for reliable performance, these nylon rivets are packaged in a convenient assortment handy for any size automotive, commercial, industrial or household application.
This Part Fits the Following OEM/Substitute Numbers:
14992, 14993, 22538004, 452630, 465330, 465330B, 479570B, 479710, 479710BP, 6502871, 91502sm40000, n8039465, N803946S
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Ford Windstar | Rear |
- GM Panel Retainer
- Inlet Package Quantity: 2 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.437
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 2 Retenedores
- Material:
- Nailon
- Nylon
- Shaft Diameter: 0.156
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
20413107, 388246S, 4006516, P80627
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Ford Windstar | Front |
- GM 1/4" Screw Rivets
- Package Quantity: 6 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.37
- Contenidos del paquete: 6 Remaches De Tornillo
-
Features:
- Comprehensive selection - Dorman offers a comprehensive line of quality nylon rivets for a range of applications, in a wide variety of sizes and styles
- Ensure fit - check product dimensions and styles to select the right assortment for your application
- Buy only what you need - conveniently packaged for any size automotive, commercial, industrial or household application
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Dorman offers a comprehensive line of quality nylon rivets ideal for a range of applications and in a wide variety of sizes and styles. Manufactured from durable materials for reliable performance, these nylon rivets are packaged in a convenient assortment handy for any size automotive, commercial, industrial or household application.
This Part Fits the Following OEM/Substitute Numbers:
479710, 479710B, 6502871, 91502sm40000, n8039465, n803946s
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Ford Windstar | Rear |
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Ford Windstar |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Windstar | V | - | 6 Cyl 3.8L | 232 |
Showing 1 - 10 of 28 products
Loading...