2003 Chevrolet S10 HVAC Parts
Choose your Part Name for your 2003 Chevrolet S10
Image
Product
Price
- White Orifice Tube 1 pkg
- OEM Replacement Orifice Tube
- White Orifice Tube 1 pkg
- Orifice Tube
- Product Attributes:
- Orifice Dia. MM: 1.803 To 1.854
- Part Note: Optional Aaot Part No. 38902, For Climates Above 105 Degrees Use (severe Duty) Aaot 38904; Bulk Package Of 10 623; Bulk Package Of 25 8623.
- Orifice Dia. IN: 0.072
- Description: Expansion Devices
- Color: White
- Pack in Qty of: 1
- Type: Orifice Tubes
-
Features:
- Injection molded plastic color coded for easy identification
- Contains necessary O-rings and gaskets necessary to seal high pressure from low pressure
- Application specific per OEM size and color
- High quality components for long lasting performance
- Direct fit replacement for ease of installation, compatible with R12 and R134
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
01475564, 0415014, 111, 11138623V, 120211, 122011, 1298293, 1324829, 13867, 155151, 155754, 1650, 1676822C91, 17700, 1810003, 185151, 19189768, 19409...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Chevrolet S10 |
- Flanged Vented CW Blower Motor with Wheel
- with Wheel with AC w/o Molded Vent Tube
- Flanged Vented CW Blower Motor with Wheel
- Blower Motor
- Product Attributes:
- Rotation: Cw
- Connector Gender: Female
- Vented?: Vented
- New or Reman: New
- Wheel Dia. IN: 5.750
- Wheel?: W/ Wheel
- Wheel Height IN: 3.625
- Motor Dia. IN: 3.250
- Flanged?: Yes
- Motor Length IN: 4.31
- Description: Blower Motor Assy /flanged
- Connector Qty: 1
- O.E. Replacement?: Yes
- Shaft Length IN: 1.31
- Type: Blower Motors
- Material: Metal
-
Features:
- Magnetic size and properties compare or exceed OEM
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Windings meet or exceed OEM specifications
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
010212, 02546, 100029, 1010011, 11135344V, 12491240, 1580173, 1580182, 1581128, 158444, 158547, 158763, 158764, 158765, 158779, 19179474, 19189064, 20121...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Chevrolet S10 |
- Hvac Air Door Actuator
- Electric Manual Temperature Control Temperature Packaging Type: Box
- Product Attributes:
- Contenidos del paquete: Actuador
- Switch Activation Type:
- Rotary
- Rotatorio
- Material:
- Plastic
- Plástico
-
Features:
- Direct replacement - made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
- Position specific - vehicles often have multiple different HVAC door actuators
- review this part's application notes to verify it matches the location and function of the actuator you need to replace
- Durable construction - designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
- Trustworthy quality - backed by a team of experts and engineers in the United States, and more than a century of experience
- This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician.
This Part Fits the Following OEM/Substitute Numbers:
15-71845, 15-72507, 16124922, 3543H2470, 73007, 89018356, ADA125, ADR103, ADS103, APBDA0062, DA1041, F04005, GM0613012, SK604100
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet S10 | Main |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 36.8
- 935
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11070, 15105740, 15729000, 18275L, 19070, 63505, 8157290000, 87739, D87739
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Chevrolet S10 | V | - | Heater To Water Pump | GAS | 6 Cyl 4.3L | 262 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 23.8
- 605
- End 1 Inside Diameter:
- .71
- 18
- Material: Epdm
- End 2 Inside Diameter:
- .71
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11707, 15978377, 18139L, 19707, 63504, 8159783770, 88389, E88389
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Chevrolet S10 | V | - | Heater To Engine | GAS | 6 Cyl 4.3L | 262 |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Chevrolet S10 | L | 2190 | Pipe-1 To Water Pump | GAS | 4 Cyl 2.2L | 134 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 26
- 660
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 18
- 203
- 457
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K20161211, 10387758, 14076098, 15032160, 15149281, 1608770, 18150L, 23538, 25505363, 25509454, 28469, 294019, 2L3Z 18472 BB, 2L3Z 18472 BC, 32002247, 4107, 4361125, 43819...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Chevrolet S10 | L | 2190 | Heater To Pipe-1 | GAS | 4 Cyl 2.2L | 134 |
- Metal Clip Nut No.8
- Floor Package Quantity: 3 Packaging Type: Clamshell
- Product Attributes:
- Thread Direction:
- Clockwise
- En Sentido Horario
- Integral Washer:
- No
- Non
- Heat Hardened:
- No
- Non
- Zinc Coated:
- No
- Non
- Finish:
- Aucun
- Ninguna
- None
- Inside Diameter: 0.125
- Shape: Rectangular
- Arandela integral: No
- Diseño de extremo abierto: Sí
- ACQ Rated:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Métrico o SAE: Sae
- Grade:
- Reemplazo Estándar
- Standard
- Contenidos del paquete: 3 Tuercas Broche
- Open End Design:
- Oui
- Yes
- Metric Or SAE: Sae
- Type:
- Tipo U
- U-type
- Material:
- Acero
- Steel
- Thread Direction:
-
Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
- Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
This Part Fits the Following OEM/Substitute Numbers:
15650655, 381818S2, 454060, 9424837, 9431530
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet S10 | Front |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Chevrolet S10 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10079, 10145763, 10241617, 12386911, 14005S, 15652879, 15668784, 15781525, 18079, 19129802, 22729506, 63223, 64325, 64425, 8156528790, 86112, 86115, 8724550360...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Chevrolet S10 | L | 2190 | Pipe-1 To Engine | GAS | 4 Cyl 2.2L | 134 |
Showing 1 - 10 of 26 products
Loading...