2008 Chrysler 300 HVAC Parts
Choose your Part Name for your 2008 Chrysler 300
A/C Compressor
A/C Compressor Clutch Coil
A/C Condenser
A/C Evaporator Core
A/C Expansion Valve Probe Assembly
A/C Receiver Drier
A/C Refrigerant Line Seal Kit
A/C System Valve Core
Cabin Air Filter
HVAC Blend Door Actuator
HVAC Blower Motor Control Module
HVAC Blower Motor Resistor
HVAC Evaporator Temperature Switch
HVAC Heater Hose
HVAC Heater Pipe O-Ring
HVAC Pressure Switch
Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 191
- 7.5
- End 1 Inside Diameter:
- .72
- 18
- Material: Epdm
- End 2 Inside Diameter:
- .72
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11736, 140569E000, 14323S, 19130283, 19736, 22610689, 4596618AB, 64321, B91028
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | 6059 | Heater To Tee-2 | GAS | 8 Cyl 6.1L | 370 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 191
- 7.5
- End 1 Inside Diameter:
- .72
- 18
- Material: Epdm
- End 2 Inside Diameter:
- .72
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | 6059 | Tee-1 To Heater | GAS | 8 Cyl 6.1L | 370 |
- Cut to Length, 13"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | 3497 | Tee-1 To Heater | GAS | 6 Cyl 3.5L | 215 |
- Cut to Length, 6"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | 2736 | Pipe To Tee | GAS | 6 Cyl 2.7L | 167 |
- Cut to Length, 6"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | 3497 | Pipe-1 To Tee-1 | GAS | 6 Cyl 3.5L | 215 |
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | 2736 | Tee-2 To Engine | GAS | 6 Cyl 2.7L | 167 |
- Air Door Actuator - Mode
- Alignment tool included as running change. Dorman parts manufactured after Feb. 15, 2023 include tool. Temperature Packaging Type: Box
- Product Attributes:
- Contenidos del paquete: Actuador
- Switch Activation Type:
- Rotary
- Rotatorio
- Material:
- Plastic
- Plástico
-
Features:
- Direct replacement - made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
- Position specific - vehicles often have multiple different HVAC door actuators
- review this part's application notes to verify it matches the location and function of the actuator you need to replace
- Durable construction - designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
- Trustworthy quality - backed by a team of experts and engineers in the United States, and more than a century of experience
- This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler 300 | Main |
- Air Door Actuator - Mode
- Alignment tool included as running change. Dorman parts manufactured after Feb. 15, 2023 include tool. Mode Packaging Type: Box
- Product Attributes:
- Contenidos del paquete: Actuador
- Switch Activation Type:
- Rotary
- Rotatorio
- Material:
- Plastic
- Plástico
-
Features:
- Direct replacement - made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
- Position specific - vehicles often have multiple different HVAC door actuators
- review this part's application notes to verify it matches the location and function of the actuator you need to replace
- Durable construction - designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
- Trustworthy quality - backed by a team of experts and engineers in the United States, and more than a century of experience
- This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician.
This Part Fits the Following OEM/Substitute Numbers:
68031977AA, 68033337AA, 68238243AA, 68299450AA, 7B0907512, 7B0907512A, 7B0907512B, ADA510, ADA510            , ADR200, ADS200, APBDA0012, DA1019, G04028, SK604024, SK604049
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Chrysler 300 | Main |
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Chrysler 300 |
- HVAC Blower Motor Resistor
- Climate Control
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Mounting Hardware Included:
- No
- Non
- Bolt Hole Quantity: 2
- Wiring Harness Included:
- No
- Non
- Connector Quantity: 2
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Connector Shape: Rectangular
- Terminal Gender:
- Macho
- Male
- Terminal Quantity:
- 2
- 3
- Wire Quantity: 0
- Connector Gender:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20467, 68029736AA, 68079480AA, 68110616AA, 68110616AB, 68379071AA, 7B0907521, JA1740, RU1373, RU684
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Chrysler 300 |
Showing 1 - 10 of 56 products
Loading...