2015 Kia Optima HVAC Parts
Choose your Part Name for your 2015 Kia Optima
A/C Compressor
A/C Compressor Clutch Pulley
A/C Condenser
A/C Evaporator Temperature Sensor
A/C Expansion Valve
A/C Receiver Drier / Desiccant Element
A/C Refrigerant Hose
A/C Refrigerant Line O-Ring
Ambient Air Temperature Sensor
Cabin Air Filter
HVAC Air Inlet Door Actuator
HVAC Blend Door Actuator
HVAC Blower Motor
HVAC Blower Motor Control Module
HVAC Blower Motor Resistor
HVAC Evaporator Temperature Switch
HVAC Floor Mode Door Actuator
HVAC Heater Hose
HVAC Pressure Switch
Image
Product
Price
- Cut to Length, 7 1/2"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Kia Optima | L | 2359 | Inverter To Radiator Pipe | FULL HYBRID EV-GAS (FHEV) | 4 Cyl 2.4L | - |
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 559
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 18
- 4
- 457
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10005279, 10021300, 100221566, 14083694, 14083734, 15530587, 15570994, 15963896, 18149L, 1885892, 1885937, 1886330, 2096933, 254364R000, 25509306, 2837183, 28468, 294018...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Kia Optima | L | 2359 | Inverter (Outlet) | FULL HYBRID EV-GAS (FHEV) | 4 Cyl 2.4L | - |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 13.5
- 343
- End 1 Inside Diameter:
- .6
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .66
- 17
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
13577, 254702G600
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Kia Optima | L | 1998 | Oil Cooler | GAS | 4 Cyl 2.0L | 122 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 216
- 8.5
- End 1 Inside Diameter:
- .6
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .66
- 17
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
13578, F11935
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2015 - Kia Optima | L | 1998 | Oil Cooler | GAS | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Kia Optima |
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Kia Optima | L | 2359 | GAS | 4 Cyl 2.4L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- DISCHARGE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Kia Optima | L | 2359 | GAS | 4 Cyl 2.4L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
- Inlet, From Auxiliary Water Pump
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 2015 - Kia Optima | FULL HYBRID EV-GAS (FHEV) |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Kia Optima |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes Impeller
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 2015 - Kia Optima | FULL HYBRID EV-GAS (FHEV) |
Showing 1 - 10 of 55 products
Loading...