1996 BMW 325i IS350 Parts
Image
Product
Price
- Locking Fuel Cap
- Vented Black Cap
- Locking
- Product Attributes:
- Vented: Yes
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10582, 11582, 12F14L, 31761, 40782, 5782, 703-1841, 9MGC782, G782, MGC782, MGC782SK, P5782
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - BMW 325i | L | 2494 | 6 Cyl 2.5L | 152 |
- PRO-TEC Cartridge Lube Metal Free Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 3.268
- Duty Type: Ld
- Micron: 22.00
- BetaRatio: 2/20/75=22/34/45
- Style: Cartridge Lube Metal Free Filt
- Media Material: Cellulose
- Outer Diameter Bottom: 3.268
- Class: A
- Inner Diameter Bottom: 1.583
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1223, 178, 21223, 21223MP, 31223, 5001201201, 51223, 51223XP, 61223, 61223BP, 618-51223, 618-51223MP, 8-51223, 85223, AC 6222 E, B5247, CF482, CF5247...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1996 - BMW 325i | L | 2494 | Mexico | 6 Cyl 2.5L | 152 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - BMW 325i |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - BMW 325i |
- PEAK OET European Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - BMW 325i |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: 1 Control Arm; 1 Ball Joint
- Mounting Hole Diameter: 12.3 Mm
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Ball Joint Mounting Type: Machined
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material:
- Rubber
- Steel
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
101-5394, 2605445, 31121136529, 31121140957, 623.34009, CA325B, CB10022, CMK80531, FA4318, GK80531, JTC144, RK80531, TC2314
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - BMW 325i | Front Left Lower |
- Suspension Control Arm Bushing
- Product Attributes:
- Package Contents: 1 Control Arm Support Bracket
- Distance Between Mounting Holes: 10.5
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
31121136532, MS104134, NI, TD346W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - BMW 325i | Front Right Lower Rearward |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: 1 Control Arm; 1 Ball Joint
- Mounting Hole Diameter: 12.3 Mm
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included: No
- Adjustable: No
- Ball Joint Mounting Type: Machined
- Ball Joint Thread Diameter: 14
- Control Arm Color: Black
- Control Arm Maximum Width: 288.5
- Bushing Material:
- Rubber
- Steel
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
101-5395, 2605446, 31121136530, 31121140958, 623.34066, CA324B, CB10021, CMK80532, FA4319, GK80532, JTC145, RK80532, TC2315
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - BMW 325i | Front Right Lower |
- Support Bushing
- Lateral Arm
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Bushing
- Bushing 1 Width: 60 Mm
- Bushing 2 Inner Diameter: 12.2 Mm
- Length: 57.2
- Bushing 1 Outer Diameter: 39.3 Mm
- Bracket Included: No
- Bushing 2 Width: 66 Mm
- Bushing 1 Inner Diameter: 12.2 Mm
- Inside Diameter: 12.1
- Outside Diameter: 35.7
- Bushing 2 Outer Diameter: 39.3 Mm
- Bushing Quantity: 2
- Mounting Type: Bushing
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
33321092248, JBU515, K200864, MS10408, TD668W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - BMW 325i | Rear Lower Inner |
- BMW E30/E36 Performance Aluminum Radiator, 1988-1999
- Performance Aluminum Radiator, fits BMW E30/E36 1988-1999
- Product Attributes:
- SellingPoint04: Functions With Stock Mechanical Fan And Stock Shrouding
- SellingPoint05: Includes Threaded Port For The Stock Temperature Sensor
- SellingPoint06: Perfect For Use With Stock, Modified, Forced Induction, Or Swapped Vehicles
- SellingPoint07: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint01: Direct Fit For The 1988-1999 Bmw E30/e36 W/ 6 Cylinder Engine
- SellingPoint02: Full Aluminum Construction With Durable, Tig-welded End Tanks
- TechSpec Overall Length (in): 26.3
- SellingPoint03: Two-row, 1.57-in Thick Brazed Aluminum Core, Providing Ideal Fluid Temperatures On The Street Or Track
- TechSpec Chassis Codes: E30--e36
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 17.13
- TechSpec Core Thickness (in): 1.57
- Installation Difficulty: 3
- SellingPoint10: N/a
- TechSpec Note: This Radiator Design Was Based On Usdm Bmw Part Number 17111723784. Please Ensure Proper Fitment With Your Vehicle Before Installing For Euro-spec Imported Vehicles.----e36: This Item Is For Manual Transmission And Automatic Transmission Vehicles. It Feat
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
-
TechSpec Engine Codes:
S52--m52--m50tu--m20b25
- TechSpec Overall Width (ins): 2.07
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 21.46
- TechSpec Overall Height (in): 18.3
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: N/a
- TechSpec Applications: 1995-1999 Bmw M3--1998-1999 Bmw 323ic/is--1988-1991 Bmw 325i--1992-1995 Bmw 325i/ic/is--1996-1998 Bmw 328i/ic/is
- TechSpec Includes: Mishimoto Radiator--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 2
- TechSpec DPI: 9751841
- TechSpec Fluid Capacity (gal): 3.13
- TechSpec Inlet (in): 1.5
- TechSpec Outlet (in): 1.57
-
Features:
- Direct fit for the 1988-1999 BMW E30/E36 W/ 6 Cylinder engine
- Full aluminum construction with durable, TIG-welded end tanks
- Two-row, 1.57-in thick brazed aluminum core, providing ideal fluid temperatures on the street or track
- Functions with stock mechanical fan and stock shrouding
- Includes threaded port for the stock temperature sensor
- Perfect for use with stock, modified, forced induction, or swapped vehicles
- Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system
- Mishimoto Lifetime Warranty
- An ideal upgrade for the brittle OEM radiator, the Mishimoto E30/E36 Performance Aluminum Radiator provides your vehicle with enhanced reliability and improved cooling efficiency. BMWs are known to have frequent cooling-related failures due to the use of numerous plastic components throughout the system. A simple coolant leak can result in overheating, accelerated engine wear, or head gasket failure. Whether you have a daily-driven E36 M3 or an M20 spinning a large turbocharger, this radiator provides ideal temperatures on and off the track. Most people overlook the importance of installing an upgraded radiator in their vehicle. Along with providing increased coolant capacity, this radiator improves heat dissipation, which is beneficial for both stock and modified applications. The Mishimoto E30/E36 Performance Aluminum Radiator is manufactured using durable aircraft-quality aluminum end tanks, precision TIG-welded to an efficient brazed aluminum core. The inlet and outlets provide precise leak-free connections, and all factory overflow and temperature sensor ports are present on the Mishimoto aluminum radiator for use with OEM sensors and hoses. This radiator also includes a magnetic drain plug with dowty seal, which effectively removes metal fragments circulating in the cooling system. The Mishimoto BMW Performance Aluminum Radiator incorporates mounting points for the factory external automatic transmission cooler, and it is a direct bolt-on fit for all 6-cylinder E30/E36 models from 1988 to 1991. As with all our products, this radiator includes the Mishimoto Lif Mishimoto E30/E36 performance aluminum radiators are constructed of durable aircraft-quality aluminum, precision TIG welded to an efficient brazed aluminum dual core.This radiator incorporates mounting points for the factory automatic transmission cooler and is a direct bolt-on fit requiring no modification to your vehicle.As with all our products, this radiator includes the Mishimoto lifetime warrant
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1996 - BMW 325i | L | 2494 | GAS | 6 Cyl 2.5L | 152 |
Showing 1 - 10 of 20 products
Loading...