2001 Ford Sable IS350 Parts
Choose your Part Name for your 2001 Ford Sable
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Tensioner Assembly
Accessory Drive Belt Tensioner Pulley
Automatic Transmission Indicator Light Bulb
Back Up Light Bulb
Brake Light Bulb
Cabin Air Filter
Center High Mount Stop Light Bulb
Courtesy Light Bulb
Disc Brake Rotor
Dome Light Bulb
Engine Compartment Light Bulb
Engine Coolant / Antifreeze
Engine Coolant Reservoir Cap
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Oil Filler Cap
Engine Oil Filter
Engine Water Pump
Fog Light Bulb
Fuel Tank Cap
Fuel Tank Strap
Glove Box Light Bulb
HVAC Heater Hose
Headlight Bulb
Instrument Panel Light Bulb
License Plate Light Bulb
Map Light Bulb
Parking Light Bulb
Power Steering Cooler
Radiator Coolant Hose
Serpentine Belt
Side Marker Light Bulb
Steering Tie Rod End
Suspension Ball Joint
Suspension Stabilizer Bar Link Kit
Tail Light Bulb
Transmission Filter Kit
Trunk Light Bulb
Turn Signal Indicator Light Bulb
Turn Signal Light Bulb
Image
Product
Price
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Fuel Delivery Type | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2001 - Ford Sable | V | 2968 | GAS | 6 Cyl 3.0L | FI | S | Naturally Aspirated | 181 |
- with Green Coolant
- PEAK OET North American Conventional Green 50/50 Pre-diuted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Ford Sable |
- PRO-TEC Spin-On Lube Filter
- Original Equipment Part Number F1AZ6731A Master Pack Version ; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.668
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 11-13 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=12/25
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1372, 159, 21372, 31372, 5001200189, 51372, 51372XP, 61372, 61372BP, 61372X, 618-51372, 8-51372, 85372, AA2, B4651, CF110, CF110AP, D407...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2001 - Ford Sable | V | 2968 | Mexico | 6 Cyl 3.0L | 181 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Ford Sable |
- Stabilizer Bar Link Kit
- Product Attributes:
- Spacer Included: No
- Mounting Hardware Included: Yes
- Grade Type: Regular
- Length: 272
- End 1 Type: Male Threaded
- Link Material: Steel
- Bushings Included: Yes
- Greaseable: No
- Bolt Thread Pitch:
- 1.75
- 1.75
- End 2 Type: Male Threaded
- Adjustable: No
- Locking Nuts Included: No
- Sleeve Included: No
- Weight: 0.59 Lb
- Bolt Thread Size: 12
- Package Contents: 1 Link; 2 Nuts
- Washers Included: No
- End 1 Attachment Size : 12 Mm
- Threaded End: Yes
- Grease Fittings Included: No
- Pre-Greased: No
- Bolts Included: No
- Dust Boot Included: No
- Bearing Material: Polymer
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1F1Z5K484AA, 45G0118, 606.61036, GK8735, JTS678, K-8735, K8735, MEF180, MK8735, SK8735, SL302HD, TC2212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Ford Sable | Front Right |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 39 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Polymer
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104217, 45D2243, 5F1Z3050A, 610.61010, FA2098, GK8687, JBJ1032, K8687, MCSOE76, MK8687, SK8687, TC1671
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Ford Sable | Front Lower |
- Steering Tie Rod End
- Replaces Original Design
- Product Attributes:
- Grease Fitting Included: No
- Mounting Hardware Included: Yes
- Package Contents: 1 Steering Tie Rod End; 1 Castle Nut; 1 Cotter Pin
- Length: 344
- End 1 Gender: Male
- Housing Material: Steel
- End 2 Gender: Female
-
Features:
- Trustworthy replacement - this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
- Durably designed - factory-sealed and precision-forged housing resists future corrosion
- Reliably engineered - built to decrease wear rate and ensure overall strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1F1Z3280AA, 45A2083, 612.61071, ES3344, EV-201, EV398, GEV398, JAR1120, MEOE12, MEV398, SEV398, TA5383
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Ford Sable | Front Inner |
- Stabilizer Bar Link Kit
- Heavy Duty Design w/Thermoplastic Bushings Sedan
- Product Attributes:
- Spacer Included: No
- Mounting Hardware Included: Yes
- Grade Type: Regular
- Bushing Color: Red
- Length: 5
- End 1 Type: Bushing
- Link Material: Steel
- Bushings Included: Yes
- Greaseable: No
- End 2 Type: Bushing
- Adjustable: No
- Locking Nuts Included: No
- Sleeve Included: Yes
- Weight: 0.59 Lb
- Bushing Material: Rubber
- Sleeve Length: 0.625
- Package Contents: 1 Bolt; 1 Spacer; 4 Bushings; 4 Washers; 1 Nut
- Bushing Inside Diameter: 0.375
- Washers Included: No
- End 1 Attachment Size : 1.25 In
- Bolt Length: 10 1/2 In
- Threaded End: Yes
- Grease Fittings Included: No
- Pre-Greased: No
- Bolt Thread Diameter:
- 0.5
- 0.625
- 0.75
- 0.375
- Bolts Included: No
- Dust Boot Included: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
45G0072, 606.61035, E6DZ5A486A, GK3124, JTS1392, K-3124, K3124, K700541, MK3124, SK3124, SL113, SL114HD, TC6159
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Ford Sable | Rear |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.39 In
- Shell Diameter: 2.74 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10117, 10117ST, 11117, 12590905, 12C47, 14119, 1F1Z6766AA, 1L2Z6763AA, 1L2Z6766AA, 1L5Z6763AA, 2078-328160, 2L3Z6582AA, 2L3Z6582CA, 2L3Z6582DA, 2L3Z6582FA, 2L3Z6582FB, 31275, 4C2Z6582CA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Ford Sable | V | 2968 | 6 Cyl 3.0L | 181 |
- Engine Coolant Reservoir Cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Valve OD: 1.30 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10238, 10238ST, 11238, 12R20, 1678-290338, 17038, 1M5Z8A080AA, 1W1Z8100AA, 217237S000, 217239FD0A, 31406, 3S4Z8A080AA, 3S4Z8A080AB, 3S4Z8A080AC, 5S4Z8101AA, 5S4Z8A080AA, 703-1726, 7038...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Ford Sable | V | 2968 | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 100 products
Loading...