2013 Jeep Wrangler JK IS350 Parts


Showing 1 - 10 of 12 products
Image
SKU
Product
Rating
Price

JKS Manufacturing
  • Quicker Disconnect Sway Bar Links
  • Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
  • JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-6" lift. Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
  • In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
  • Product Attributes:
    • California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Minimum Adjusted Length: 8.00
    • For Use With Lift Heights: 2.5"-6"
    • Installation Time: 1-2
    • Horizontal Position: Front
    • Installation Difficulty: Moderate
    • Is Adjustable: Yes
    • Length: 8 To 11-5/8
    • Maximum Adjusted Length: 11.625
    • Title: Quicker Disconnect Sway Bar Links
    • Installation Tools Requirements: Angle Measuring Tool; Factory Service Manual (recommended); Grease Gun With Zerk Fitting Coupler; Medium Strength Threadlocker; Metric/standard Socket Wrench Set; Torque Wrench; Wheel Bearing Grease
  • Features:
    • Fits vehicles with 2.5"-6.0" Lift Only
    • Gain up to 30 percent more axle articulation by disconnecting your front sway bar
    • Also fits Wrangler JK right hand drive models
    • Dramatically improve off-road performance on stock or modified Jeeps
    • Variable length design adapts to your vehicle and future modifications
    • Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
    • Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
    • Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
  • JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-6" lift. Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

JKS Manufacturing
  • Front Adjustable Track Bar
  • Suggested Starting Length - 33.25" Min. Adjusted Length - 32.2" Max Adjusted Length - 34.2" *See Instructions for further details. Does NOT fit Right Hand Drive
  • JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.
  • In the box: All Necessary Mounting / Installation Hardware Track Bar
  • Product Attributes:
    • California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Minimum Adjusted Length: 32.20
    • For Use With Lift Heights: 1-6"
    • Installation Time: 2-3
    • Horizontal Position: Front
    • Installation Difficulty: Moderate
    • Is Adjustable: Yes
    • Maximum Adjusted Length: 34.20
    • Title: Front Adjustable Track Bar
    • Suggested Starting Length: 33.25
  • Features:
    • Superior quality replacement for original fixed length panhard rod
    • Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
    • Fine adjustment threads enable ultra precise axle positioning
    • Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
    • Premium grade rubber bushings ensure long-lasting comfort and quietness
    • Zinc plated and powder coated for protection from corrosion and debris
  • JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

JKS Manufacturing
  • Quicker Disconnect Sway Bar Links
  • Min. Adjusted Length - 5.625" Max Adjusted Length - 7.125" *See Instructions for further details. Not compatible with aftermarket swaybars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
  • JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
  • In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
  • Product Attributes:
    • California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Minimum Adjusted Length: 5.625
    • For Use With Lift Heights: 0-2"
    • Installation Time: 1-2
    • Horizontal Position: Front
    • Installation Difficulty: Moderate
    • Is Adjustable: Yes
    • Length: 5-1/2 To 7-1/8
    • Maximum Adjusted Length: 7.125
    • Title: Quicker Disconnect Sway Bar Links
  • Features:
    • Fits vehicles with 0"-2" Lift Only
    • Gain 30 percent more axle articulation by disconnecting your front swaybar
    • Also fits Wrangler JK right hand drive models
    • Dramatically improve off-road performance on stock or modified Jeeps
    • Variable length design adapts to your vehicle and future modifications
    • Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
    • Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
    • Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
  • JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

Zone Offroad
  • Single Steering Stabilizer
  • OE Replacement Mounting Design.
  • While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality systems are designed to improve tire wear and front end component life as well as lessen side to side motion caused by wide tires and unpredictable road conditions.
  • In the box: All Necessary Mounting / Installation Hardware Bushings Single Steering Stabilizer Cylinder
  • Product Attributes:
    • For Use With Lift Heights: Any
  • Features:
    • Heavy duty cylinder construction
    • Helps control front end shimmy caused by oversized wheels/tires
    • Extends life of front end steering components
  • Zone Offroad offers Nitro Series Steering Stabilizers in single and dual configurations as well as FOX ATS Steering Stabilizers for Chevrolet / GMC, Ford, RAM, Dodge trucks as well as Jeeps. Benefits include improved steering feel and heavy-duty shafts. Zone Nitro Series Steering Stabilizers feature twin-tube design and steel body construction for affordable performance. Bolt-on design. Made in the USA.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

Zone Offroad
  • 3/4" Coil Spring Spacers
  • See Pre-Installation Check in the Instructions to verify fitment
  • ***See Pre-Installation Check in the Instructions to verify fitment*** Is your Jeep in need of a little front-end boost to compensate for heavy winch bumpers and/or clear a larger tire? These 3/4" coil spring spacers are specially designed for use on the front of the Jeep Wrangler JK, Wrangler JL and Gladiator JT models. Perfect for getting that extra height without effecting ride quality or handling. Designed for stock height vehicles and most lift kits that use replacement coil springs.
  • In the box: Coil Spring Spacers
  • Product Attributes:
    • Diameter: N/a
    • Horizontal Position: Front
    • Is Adjustable: No
    • Height: 3/4"
  • Features:
    • Lifts and levels the front to back stance.
    • Maintains ride quality and handling characteristics.
    • Polyurethane construction for long lasting, quiet operation.
    • Provides extra boost to level out or compensate for heavy winch bumpers and accessories.
    • Quick and easy installation.
  • Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

JKS Manufacturing
  • Drag Link Flip Kit
  • For use on LHD JK models with at least 2" of suspension lift Requires 3" of front bump stop extension, JKS1130 available separately Should not be combined with other track bar relocation system Can be used with factory replacement adjustable track bars To be used with factory pitman arm for proper geometry Requires 17" diameter wheel or larger, with 4.75" backspacing or less
  • JKS Manufacturing?s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8? step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.
  • Product Attributes:
    • California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Title: Drag Link Flip Kit
  • Features:
    • Provide better performing, solid steering feel
    • Flattens out steering angle when combined with 2" lift or more
    • 7/8" Step Drill Bit Included
  • JKS Manufacturing’s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8” step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

JKS Manufacturing
  • Adjustable Rear Track Bar
  • Suggested Starting Length - 40.38" Min. Adjusted Length - 39.43" Max Adjusted Length - 42.43" *See Instructions for further details. Fits 0 to 6.0 in. suspension lift. Rear Trackbar Brace [JKS PN: OGS169] is strongly recommended to reinforce weak factory mount on axle. Trackbar Brace fits Left Hand Drive Models Only.
  • Install a new adjustable rear track bar on your RHD Jeep Wrangler JK to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, thick wall DOM CNC-bent tubing and powder coated and zinc finish. Heavy-duty rubber bushings at both ends provide quiet, vibration-free operation. Fits right hand drive JK only with up to 6" lift. Bolt-on installation.
  • In the box: All Necessary Mounting / Installation Hardware Track Bar
  • Product Attributes:
    • California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Minimum Adjusted Length: 39.43
    • For Use With Lift Heights: 0-6"
    • Installation Time: 6
    • Horizontal Position: Rear
    • Installation Difficulty: Moderate
    • Is Adjustable: Yes
    • Maximum Adjusted Length: 42.43
    • Title: Adjustable Rear Track Bar
    • Suggested Starting Length: 40.38
  • Features:
    • Zinc plated and powder coated for protection from corrosion and debris
    • Also fits Wrangler JK right hand drive models
    • Superior quality replacement for original fixed length panhard rod
    • Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
    • Fine adjustment threads enable ultra precise axle positioning
    • Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
    • Premium grade rubber bushings ensure long-lasting comfort and quietness
  • Install a new adjustable rear track bar on your RHD Jeep Wrangler JK to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, thick wall DOM CNC-bent tubing and powder coated and zinc finish. Heavy-duty rubber bushings at both ends provide quiet, vibration-free operation. Fits right hand drive JK only with up to 6" lift. Bolt-on installation.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

Zone Offroad
  • Sway Bar Links
  • Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8? solid steel with eyelets at either end and install with black urethane bushings, sleeves and mounting hardware. Designed for use with 3-4.5" lift kits.
  • In the box: All Necessary Mounting / Installation Hardware Bushings Sway Bar Links
  • Product Attributes:
    • For Use With Lift Heights: 3-4.5"
    • Horizontal Position: Front
    • Is Adjustable: Yes
    • Length: 9"
  • Features:
    • HD design with 5/8" solid steel center section
    • Black urethane eyelet bushings for improved performance
    • Clear zinc plated for long lasting appearance

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

Zone Offroad
  • Adjustable Track Bar
  • JK Models - For use with 0"-4" of lift. WJ Models - For use with 2"-4" of lift. Requires 2" of bump stop extension for proper axle clearance. Not Included.
  • Upgrade your factory front track bar for improved strength, control, and axle positioning with this heavy duty adjustable replacement track bar. Designed for easy installation and fine adjustment, this track bar allows you to recent the front axle with a wide range of lift heights. The bar itself is manufactured from 1.25? OD solid stock, formed for proper fitment and optimal clearance. At either end a durometer specific urethane bushings are used to better isolate road noise and vibrations.
  • In the box: Bushings Jam Nut Track Bar
  • Product Attributes:
    • For Use With Lift Heights: See Notes
    • Horizontal Position: Front
    • Is Adjustable: Yes
  • Features:
    • High strength 1.25" solid steel construction with a 1"-14 threaded end for adjustable length.
    • Black urethane eyelet bushings and sleeves for better control motion for improved handling
    • Durable textured black powdercoat for long lasting appearance
  • Properly align your lifted truck with Zone Offroad adjustable track bars and track bar relocation drop brackets. Fix the dreaded death wobble by correcting your steering geometry with a Zone track bar or bracket kit. Easy to install and affordable solutions to correct lifted suspension systems.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK

Zone Offroad
  • Dual Steering Stabilizer Kit
  • 2"+ of additional bump stop required (included with most lift kits). Brackets designed for stock axle and steering linkage.
  • While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality dual steering stabilizer systems are designed to improve tire wear and front end component life as well as lessen side to side motion caused by wide tires and unpredictable road conditions. Kits include cylinders, brackets and mounting hardware.
  • In the box: All Necessary Mounting / Installation Hardware Bushings Dual Steering Stabilizer Cylinders
  • Product Attributes:
    • For Use With Lift Heights: Over 4"
  • Features:
    • Helps control front end shimmy caused by oversized wheels/tires
    • Extends life of front end steering components
    • Dual heavy duty cylinder construction
    • Mounts stabilizers end-to-end
    • Mounting brackets and hardware included
  • Zone Offroad offers Nitro Series Steering Stabilizers in single and dual configurations as well as FOX ATS Steering Stabilizers for Chevrolet / GMC, Ford, RAM, Dodge trucks as well as Jeeps. Benefits include improved steering feel and heavy-duty shafts. Zone Nitro Series Steering Stabilizers feature twin-tube design and steel body construction for affordable performance. Bolt-on design. Made in the USA.

Additional Fitment Information:
Vehicle
2013 - Jeep Wrangler JK
Showing 1 - 10 of 12 products

Loading...