1958 Austin A30 Lexus Parts
Image
Product
Price
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- 4 Pass 13in. Series 7000 Copper/Aluminum Transmission Cooler Kit
- Copper Tube And Aluminum Fin; 12-3/4 in. Width; 5-1/8 in. Height; 3/4 in. Depth; 11/32 in. Hose Size; 4 ft. Hose Length
- Transmission Cooler; Subcompact (Carton)
- Series 7000 Transmission Cooler Kit
- Product Attributes:
- Gross Vehicle Weight: 12000 Lbs.
-
Features:
- Prevents Heat Related Transmission Failures
- Extends Life Of Transmission
- Improves Transmission Performance
- Extruded Plastic Cooling Fin Guards
- 4 Pass Cooler Design
- 1/2 in. Copper Tubing Expanded Into Aluminum Cooling Fins
- 11/32 in. Hose Barb Inlets
- Rated At 12000 GVW
- Includes Complete Hardware Kit
- This Tube & Fin transmission cooler features 1/2 in. copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for today's highly-stressed subcompact cars, they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- Autolite 404 Copper Resistor Spark Plug
- OE Style; .025 Gap
- Copper Resistor Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Resistor Type: Yes
- Insulator Material: Ceramic
- Hex Size:
- 13/16"
- 21
- Reach:
- 0.750
- 19.5
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Tapered
- Insulator Type: Short
- Pre-Gap Size:
- 0.034
- 0.90
- Resistance: 5000
- Ground Electrode Core Material: Nickel
- Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
120, 3016, 41-828, 904, AG3
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- Oil Seal
- with British Leyland Axle
- National 51098 Oil Seal
- Product Attributes:
- Inside Diameter:
- 1.500
- 38.100
- Shaft (Inch): 1.500
- Sealing Material: Nitrile
- Width (Inch): 0.437
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.502
- Outside Diameter:
- 2.506
- 63.650
- Outside Diameter (Inch): 2.506
- Redicoat: Yes
- Shaft (MM): 38.100
- Part Description: Oil Seal
- Inside Diameter:
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12305146, 1353918, 1353919, 15120, 15142, 211-3509, 23213205, 23213207, 23213308, 2469545, 2620322, 2620377, 277724R91, 28701, 291132, 29194, 2987, 417.64001...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1958 - Austin A30 | Rear Outer |
- Oil Seal
- National 331107N Oil Seal
- Product Attributes:
- Inside Diameter:
- 2.000
- 50.800
- Shaft (Inch): 2.000
- Sealing Material: Silicone
- Width (Inch): 0.375
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.746
- Outside Diameter:
- 2.750
- 69.850
- Outside Diameter (Inch): 2.750
- Shaft (MM): 50.800
- Part Description: Oil Seal
- Inside Diameter:
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
194358, 19807, 248C20006, 29398, 331107N, 46165, 480198, 59520S, 6150037, 84651, 84651H, 84651N, A81101P, A81101S, B29844, B9A77837A, C0DP7A248A, C2AP7A248A...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|---|
| 1958 - Austin A30 | Automatic | Front | 2 | DG200 |
- Ball Bearing
- Open Design with Lucas Alternator with 22 Amp Alternator C40 Models
- National 202 Ball Bearing
- Product Attributes:
- Inner Race Radius (Inch): 0.024
- Design: Single Row Radial
- Width (Inch): 0.433
- Outer Race Outside Diameter (Inch): 1.378
- Outer Race Outside Diameter (MM): 35.000
- Inner Race Radius (MM): 0.610
- Inner Race Bore (Inch): 0.591
- Inner Race Width (MM): 11.000
- Inner Race Width (Inch): 0.433
- Outer Race Width (Inch): 0.433
- Outer Race Width (MM): 11.000
- Bore (Inch): 0.591
- Inner Race Bore (MM): 15.000
- Outer Race Radius (MM): 0.610
- Outside Diameter (Inch): 1.378
- Outer Race Radius (Inch): 0.024
- Part Description: Ball Bearing
- Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
This Part Fits the Following OEM/Substitute Numbers:
00625022-40, 008501504, 011055770, 053016202, 055844, 060162020, 068544, 085844, 1002947, 100835, 1009274, 10094, 1012, 10902221, 11009, 11009-8, 111-903-221, 11542920...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1958 - Austin A30 |
- Oil Seal
- Long Boot with 1.250 (in) Width
- National 7300S Oil Seal
- Product Attributes:
- Shaft (Inch): 1.685
- Sealing Material: Polyacrylate
- Width (Inch): 0.421
- Overall Width with Side Lip (Inch): 1.250
- Redicoat: Yes
- Overall Width with Side Lip (MM): 31.750
- Flanged Outside Diameter (Inch): 2.850
- Flanged Outside Diameter (MM): 72.390
- Inside Diameter:
- 1.685
- 42.800
- Helix Type: Counter-clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.500
- Outside Diameter:
- 2.506
- 63.650
- Outside Diameter (Inch): 2.506
- Shaft (MM): 42.800
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
02400300, 03515383, 04531216, 04531216 AB, 04626590, 04741119, 05016760AA, 1300044002, 16156, 16567, 16727, 2400300, 29348, 3515383, 4531216, 4531216AB, 4626590, 47362...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1958 - Austin A30 | Automatic | 2 | DG200 |
Showing 1 - 10 of 10 products
Loading...