2023 Audi RS3 Smart Parts
Choose your Part Name for your 2023 Audi RS3
ABS Wheel Speed Sensor
Air Filter
Bolt
Brake Bleeder Screw
Brake Bleeder Screw Cap
Bulk Wire
Cabin Air Filter
Disc Brake Anti-Rattle Clip
Disc Brake Caliper Bolt
Disc Brake Caliper Bracket Mounting Bolt
Disc Brake Caliper Pin
Disc Brake Caliper Pin Boot Kit
Disc Brake Pad Wear Sensor
Disc Brake Rotor
Engine Air Filter
Engine Coolant / Antifreeze
Engine Coolant Water Inlet
Engine Oil Drain Plug
Engine Oil Drain Plug Gasket
Engine Oil Filter
Engine Oil Filter Kit
Engine Oil Level Sensor
Floor Mat Set
HVAC Heater Core O-Ring Kit
Paint Protection Film Kit
Primary Wire
Rack and Pinion Bellows
Seat Cover
Spark Plug
Steering Tie Rod End
Suspension Stabilizer Bar Link Kit
Tire Pressure Monitoring System (TPMS) Programmable Sensor
Vehicle Battery
Washer Fluid Level Sensor
Washer Fluid Level Sensor Seal
Wheel Bearing and Hub Assembly
Wheel Lug Bolt
Window Shade
Windshield Washer Pump
Windshield Wiper Blade Set
Image
Product
Price
- AUDI Brake Code 1ZL
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.96
- 49.8
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.597
- 15.15
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.984
- 25
- Discard Thickness: 0.866
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi RS3 | Front |
- AUDI Brake Code 1ZU
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.96
- 49.8
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.597
- 15.15
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.984
- 25
- Discard Thickness: 0.866
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi RS3 | Front |
- AUDI Brake Code 1ZK
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.96
- 49.8
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.597
- 15.15
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.984
- 25
- Discard Thickness: 0.866
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-2993, 09.9772.11, 120.33098, 121.33098, 121.33131, 12133131, 125.33098, 125.33098CRY, 125.33131, 125.33131CRY, 126.33098CSL, 126.33098CSR, 126.33098SL, 126.33098SR, 126.33131CSL, 126.33131CSR, 126.33131SL, 126.33131SR...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi RS3 | Front |
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.92
- 48.75
- Grade Type: Regular
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.605
- 15.35
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.56
- 65
- Inside Diameter:
- 174.65
- 6.875
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.39
- 9.9
- Surface Type: Smooth
- Construction: Full Cast
- Mounting Bolt Hole Quantity: 5
- Misc. Holes: 5
- Bearings Included: No
- Discard Thickness: 0.314
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-2994, 120.33129, 120.33131, 121.33131, 125.33129, 125.33131, 125.33131CRY, 126.33131CSL, 126.33131CSR, 126.33131SL, 126.33131SR, 127.33131CL, 127.33131CR, 127.33131L, 127.33131R, 128.33131CL, 128.33131CR, 128.33131L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Audi RS3 | Rear |
- PROTEC-NEW Cartridge Lube Metal Free Filter
- Original Equipment Part Number 06D 115 562
- Product Attributes:
- Outer Diameter Top: 2.525
- Duty Type: Ld
- Micron: 17.00
- BetaRatio: 2/10/20=17/24/27
- Media Material: Cellulose
- Outer Diameter Bottom: 2.525
- Class: A
- Inner Diameter Bottom: 1.21
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 986 AF0 243, 041-8184, 0418185, 1 457 429 243, 1457429243-HET, 27187, 3581, 37187, 47187, 500101516, 57187, 57187XP, 618-57187, 67187, 67187X, 7187, 72225WS, 787...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Audi RS3 | L | 2480 | Mexico | 5 Cyl 2.5L | 151 |
- Defense Filters, DL9911, Oil Filters
- Cartridge Oil Filter
- DEFENSE
- Product Attributes:
- O-Ring Inside Diameter: 2.637
- O-Ring Thickness: 0.139
- Outer Diameter Top: 2.472
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.826
- Washable: No
- Non Slip Grip: No
- Gasket Thickness: 0.472
- Torque Nut: No
- Gasket Type: Cover
- O-Ring Outside Diameter: 2.776
- Top Inside Diameter: 1.22
- Grade: Advanced
- Outer Diameter Bottom: 2.472
- Gasket Outside Diameter: 3.102
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Inside Diameter Bottom: 1.22
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
This Part Fits the Following OEM/Substitute Numbers:
06D 115 466, 06D 115 562, 06D 198 405, 1AMFL00019, 27187, 3581, 37187, 47187, 57187, 57187XP, 61857187, 67186, 67187X, 7187, 72225WS, 8-57187, 84187, 9911...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi RS3 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi RS3 |
- Programmable EZ-sensor - Black Straight Valve - 90 Degree
- Use 33500 if 33983 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Easy to program and covers the majority of vehicles on the road in North America
- Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. Please use Schrader supplied original replacement parts to invoke the warranty. All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi RS3 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi RS3 |
- Programmable EZ-sensor - Black Angled Valve - 90 Degree
- Use 33500 if 33982 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Ready out of the box
- Easy to program and covers the majority of vehicles on the road in North America
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Audi RS3 |
Showing 1 - 10 of 114 products
Loading...