1964 Jeep Gladiator Suspension Parts
Choose your Part Name for your 1964 Jeep Gladiator
Image
Product
Price
- 7/16 in. - 20 x 3 in. Grade 8; Used w/PN[J0916646] w/Silent Block Shackles
- Shackle Bolt; 7/16 in. - 20 x 3 in. Grade 8; Used w/PN[J0916646];
- Shackle Bolt
-
Features:
- Shackle Bolt
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Jeep Gladiator |
- Shock Mounting Bushing;
- Shock Mounting Bushing
- Product Attributes:
- Diameter (in.): Oe
-
Features:
- Shock Mounting Bushing
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Jeep Gladiator |
- For Use w/Dana 25/27/30/44
- Axle Spindle Bushing; For Use w/Dana 25/27/30/44;
- Axle Spindle Bushing
-
Features:
- Axle Spindle Bushing
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Jeep Gladiator |
- with Rear Raised Height 0 (in)
- RS5000X
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
22003310, 22011979, 22011983, 22011984, 22012098, 22046408, 22064002, 22064003, 22064004, 22064005, 22064427, 22064429, 22065226, 3187843, 3187844, 3187847, 3837028, 4039724...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1964 - Jeep Gladiator | Rear |
- HYDRO SHOCK W/RED BOOT
- 24.84 in. Extended; 14.82 in. Collapsed; w/2 - 3 in. Lift
- HYDRO SHOCK W/RED BOOT
- Hydro Shock Absorber
- Product Attributes:
- Collapsed Length: 14.820 In.
- Shock Stroke: 10.020 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 24.840 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1964 - Jeep Gladiator | L | 3770 | Front | 6 Cyl 3.8L | 4WD | 230 |
- 3.5-4.5 in. Lift; w/3 - 4.5 in. Lift
- GLAD REAR BMAX SHK;3.5-4.5in.
- Black MAX Shock Absorber
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity for MAX Heat Dissipation
- 360 Degree Arc Welded End Mounts
- 180 Degree Directional Mounting
- Twin Tube Construction
- Chrome Plated Shaft
- Sintered Iron Piston
- Limited Lifetime Warranty
- Black MAX twin tube shock absorbers have increased fluid capacity and utilize foam-cell technology. When the shock is working hard and gets hot, the foam-cell insert compresses to compensate for oil expansion which maintains consistent MAX performance throughout the operating temperature range of the shock. The foam-cell design also eliminates air inside the shock which allows for mounting in any direction. Arc-welded end mounts and select specific valving give this shock absorber MAX value.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1964 - Jeep Gladiator | L | 3770 | Rear | 6 Cyl 3.8L | 230 |
- BLACK MAX SHOCK ABSORBER
- w/Black Boot; 19.07 in. Extended; 12.07 in. Collapsed; w/0 - 1 in. Lift
- BLACK MAX SHOCK W/BLK BOOT
- Black MAX Shock Absorber
- Product Attributes:
- Collapsed Length: 12.070 In.
- Shock Stroke: 7.000 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 19.070 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity for MAX Heat Dissipation
- 360 Degree Arc Welded End Mounts
- 180 Degree Directional Mounting
- Twin Tube Construction
- Chrome Plated Shaft
- Sintered Iron Piston
- Limited Lifetime Warranty
- Black MAX twin tube shock absorbers have increased fluid capacity and utilize foam-cell technology. When the shock is working hard and gets hot, the foam-cell insert compresses to compensate for oil expansion which maintains consistent MAX performance throughout the operating temperature range of the shock. The foam-cell design also eliminates air inside the shock which allows for mounting in any direction. Arc-welded end mounts and select specific valving give this shock absorber MAX value.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1964 - Jeep Gladiator | L | 3770 | Rear | 6 Cyl 3.8L | 4WD | 230 |
- Monro-Matic Plus Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
344015, 344044, 344085, 344090, 344097, 344426, 344429, 43048, 43062, 43093, 4850029286, 4850029315, 4850029335, 4850029385, 4850029425, 4851135120, 4851139425, 4851139435...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1964 - Jeep Gladiator | Rear |
- King Pin Bearing Shim Kit;
- King Pin Bearing Shim Kit
-
Features:
- King Pin Bearing Shim Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1964 - Jeep Gladiator |
- with Rear Raised Height 0 (in)
- RS9000XL
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
22003310, 22011979, 22011983, 22011984, 22012098, 22046408, 22064002, 22064003, 22064004, 22064005, 22064427, 22064429, 22065226, 3187843, 3187844, 3187847, 3837028, 4039724...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1964 - Jeep Gladiator | Rear |
Showing 1 - 10 of 21 products
Loading...